Top 10 Tap A Keg Kegerator

Refreshing craft beer straight from your countertop tap! Bring 5-liters of your favorite craft brew right into your kitchen, and keep it cold and fresh for 30+ days after tapping. Fill the included 5-Liter keg growler, or use any standard pressurized or non-pressurized mini keg. An easy-pull tap handle makes dispensing easy, while a removable drip tray catches any drips.

These are unique monogrammed wood beer tap handle for restaurants, bars, soda makers, homebrewers, events, weddings, and much more! The tap handle’s magic comes from a dual faced chalkboard erasable surface that allows you to write in whatever you have got on tap.
Measures:
Approximately 8″Long X 2″ Wide X 1″ Thick
Chalkboard Insert: 5.9’’Long

Threaded insert : 3/8 ” 16 UNC thread

Material: natural walnut wood

Engraved: One sided

Faucet is not included.

Chalkboard on the front of the handle to write your current brew

Draft beer machine beer tap with flow control switch G5 / 8 thread,8MM Beer Pipe Barb Adjustable liquor flow, the amount of bubbles Full 0 ~ 100% flow control, Quick and easy to clean. Finish: chrome, bright colors Material: Stainless steel Dimensions: length 170mm, high 180mm

This is a Kegco commercial grade lever Handle keg coupler. The KT85D-L is compatible with all domestic brand kegs. This keg tap works with all American “D” system sankey kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body with a stainless steel probe. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg.

Warm Tips: 
  The type of coupling configuration is the area that must match. Keg couplers are categorized by letters (I.e., S, G, U, D).  
Each beer keg requires one and only one of these couplers. American beers typically use a D coupler. European beers typically uses a S coupler 
 
How to check whether the sankey d keg coupler leaks or not？ 
The best way to check is to spray it with soapy water when it is under pressure and look for bubbles.
There is a white lug under the gas in nipple that is held on by a hex nut. That prevents backflow into the regulator and also acts as a seal.
It’s possible that that hex nut is not tightened enough or that check valve is misaligned, causing a bad seal

Package Includes:  
1* Keg Coupler D System

Standard Beer faucet with 4-1/8 inch shank and black plastic knob. Faucet and shank made of chrome plated brass

“D” system is the most common system available in the U.S., also known as American Sankey. It is used by all the major breweries.

  How to use the beer keg coupler？
You also need a gas tank/regulator/beer faucet/hose to get the gas from the regulator to the coupler and dispense your beer. And then tap the sankey coupler to keg, pull the handle out and then down to lock

How to check whether the sankey d keg coupler leaks or not？
The best way to check is to spray it with soapy water when it is under pressure and look for bubbles.
There is a white lug under the gas in nipple that is held on by a hex nut. That prevents backflow into the regulator and also acts as a seal.
It’s possible that that hex nut is not tightened enough or that check valve is misaligned, causing a bad seal

Features:
System: D Keg Coupler
Body Material: 304 Stainless steel
Probe Material: 304 Stainless steel
Handle Color: Black
Handle Style: 304 Stainless steel – Lever
Gas Port: 3/8″ O.D. Barb (To fit 5/16″ I.D. Gas Hose)
Beer Port: 5/8″ Thread (U.S. Beer Industry Standard)
pressure relief valve: pressure relief valve releases at 55 PSI
Short handle is ideal for the smaller diameter 1/6 kegs

Package Includes:  
1* 304 Stainless Steel Keg Coupler

Draft faucet cap sanitary cover – tap soother. You probably do not really want to know about all of the things that can get up inside the spout of a draft faucet. Let’s just say that fruit flies are probably the more tame beasties that can get up in there and taint your beer. Sanitation and hygiene are a life style in the beer world but in a home draft system beer faucets are an inconspicuous place that people rarely think about. Most individuals are pretty good about regular line cleaning, and I’m sure most kegerators out there are pretty spotless, however it is all of the time between uses where small amounts of beer residue inside of the tap spout can remain after pouring your prized brew. This leftover beer will attract insects and harbor bacteria, so the next time you pour a few, that beer might not be so pristine. So what do we do about it? That is where the tap soother comes in! We recommend keeping a spray bottle of sanitizer in your bar (like star san from 5 star chemicals). When you are ready to shut the bar down for the night, just give the inside of your faucet a little spritz of sanitizer then slip on your faucet cap. The cap will keep the insides of your faucet spout nice, clean and bug free until you are ready to pour another beer. Another advantage to these faucet caps is that they can help prevent dried beer from sicking your faucet shut. The best way to keep faucets clean and sanitary. Protects faucets from insects and bacteria that can get into the spout of your faucet. Simple and effective works with nearly all types and brands of draft faucet including Perlick. An essential part of draft faucet hygiene.