Top 10 Zeks Refrigerated Air Dryer

The MV-90 is designed for when the vent path takes a 90 degree turn, such as down through the floor, up through the ceiling, or off to the side. -The MV-90 can handle offsets up to 3 inches from center to center. The more accurately you line up the MV-90 with the vent on the back of your dryer, the better the vent path and the further back you can locate your dryer. Normally, the MV-90 requires 5 1/2 inches of clearance behind the dryer. If an obstruction necessitates you locate the MV-90 at the maximum 3 inch offset, then your dryer will need to sit out an additional 3 inches to allow for a bend radius in the transition duct. -Close vent offsets between dryer and wall vent located on same wall as dryer (Offsets between 6-9 inches): The MV-90 can be coupled directly to a standard 4 inch diameter, adjustable, 90 degree elbow which creates a 9 inch offset. See photo below. If your same wall offset is 6 inches, you can use the MV-90 and an elbow, taking advantage of its ability to handle misalignment up to 3 inches. -Same wall offsets greater than 9 inches: Simply mount the MV-90 directly behind your dryer, plug the 90 degree elbow into the wall vent, and measure for the required length of rigid metal pipe between them. Make sure to measure from where the pipe will stop on the MV-90 to the stop on the male end of the rigid metal pipe. -Close vent offsets between dryer and wall vent located on same wall as dryer (Offsets between 0-3 inches): If your same wall offset is between 0 and 3 inches, then the MV-180 is the product for you.

MetroVac 110-142164 Model SK-1-IND Air Force Blaster Sidekick Industrial, 1.3 HP Motor, 8 Amps, 960 Watts, 18000 ft./min. Airflow, Sturdy All Steel Construction, 12 ft. Heavy Duty 3 Conductor Cord

Key Features

• Blower-driven system offers quieter operation
• Effectively removes fibers, dust and debris from clothes, surfaces, or components
• Safe to use and requires less energy than high-pressure air compressors
• Powerful airflow produced by the SIDEKICK delivers a high volume of air at a relatively low pressure – only 3.5, well below OSHA standards
• Lower pressure means the SIDEKICK can be safely be aimed at any part of the body; even direct contact with skin poses no hazard (always use caution)
• The SIDEKICK also uses far less energy and emits far less noise than its compressed air counterparts
• Heavy-duty all steel body ensures long-lasting operation
• Lightweight and portable, it can be moved easily to any location

Specifications

• Construction: Sturdy All Steel
• Motor: 1.3 Peak HP
• Amps: 8 Amps
• Watts: 960 Watts
• Airflow: 18,000 ft./min.
• Cord: 12 ft. Heavy Duty 3 Conductor
• Dimensions: 4.25″x7.5″x9.75″
• Weight: 3 lbs
• Accessories: 3′-6′ Stretch Hose, Blower Nozzle, Air Flare, Shoulder Strap, and 2 mounting hooks

Soleaire has redefined how air movers and fans are produced with this MAX STORM. This blower is produced with a thoroughly durable Roto-molded polyethylene shell that can withstand all the abuse/use that is handed out in the environments that these are used in. They are lightweight, draw low amps, and move large volumes of air. When running a professional Janitorial or carpet cleaning business, you’ll need multiple fans that can be left behind at a job and picked up later, for the ultimate in efficiency. Simply start a job in the morning and come back late in the afternoon to pick up your fans, and inspect the job. Leaving an individual’s house with clean/dry carpets will make them a repeat customer for life!
Features: Extremely efficient motor construction and air mover fan operation allow for extremely low amp draws on both speed settings. Blows air at 2 separate speed settings for customizable drying per job setting. 25′ power cord easily winds around the cord wrap located on the top of the blower. 3 operating angles allow you to blow air across the ground, at a 45 Degree angle, and straight up into the air.

Small but mighty, the XPOWER P-230AT produces a plentiful airflow capacity for small to large jobs in every size location. Weighing just under 10 lbs., this super portable air mover is ideal for drying tight spaces such as crawl spaces, under counters, inside cabinets, bathrooms, auto interiors, and more. With an on-board power outlets to connect several units together and 3 hour timer, this unit is great for professional carpet cleaning/drying, water damage restoration jobs, or home use. Manufactured with rugged state-of-the-art injection mold technology, the P-230AT’s commercial grade housing and motor will ensure optimum performance for years of service.

Enjoy a comfortable home climate with this versatile BLACK+DECKER unit. It cools, dehumidifies, and circulates air to stand up to summer heat. Offering immediate, uninterrupted comfort, this Portable Air Conditioner features easy-to-use LED electronic controls and is quiet while you sleep (75dB on high setting). This unit comes with rolling castors and side carrying handles for easy-to maneuver mobile comfort and everything needed for an effortless installation. Keeps a room, home, bedroom, apartment, dorm or garage that is approximately 100 – 150 square feet or 10 x 12` foot room pleasant and comfy during the summer months when the heat sets in. Works in double hung or sliding windows only, no crank windows.

FREQUENTLY ASKED QUESTIONS:

Is there an extender for wider windows?
No.

Can it only be vented through a window?
It can be vented through a wall or door into another room that you don’t mind getting warm.

What refrigerant?
R600A.

What is the Volts and Hz?
115v and 60Hz.

Will it restart after a power outage?
Yes, it will restart automatically.

How long is the exhaust hose?
5 feet.

Is the window kit included?
Yes, the window kit is included with the unit and is easy to set up.

Is there a sleep button?
Yes.

Is the unit noisy?
No.

How many amps?
9 amps.

Can these be setup in a crank casement window?
No, only a slider casement window.

If my window is smaller, can I cut the included window panel?
Yes, you can cut the window panel using a saw if you need to make it smaller to exhaust. Please be careful though.

How long is the power cord?
84-3/8” long.

Included Components: Installation Kit: Air exhaust hose hose inlet/outlet adapters window casement water drain hose and owner’s manual, Full function remote control

Product Description

This periscope can range from 0 to 18 Inch depending on preference. It includes one male snap-lock fitting and one extra long draw-band collar. Keep in mind that any excess length can be trimmed to fit according to your needs.

From the Manufacturer

This periscope can range from 0 to 18 inches depending on preference. It includes one male snap-lock fitting and one extra long draw-band collar. Keep in mind that any excess length can be trimmed to fit according to your needs.

Dry an entire car including those hard-to-reach areas that towels and chamois simply don’t reach. It’s fast, it’s easy, and cost effective, best of all it really blows. One hand operation with lock-trigger, 7 feet power cord, 110 Volts, 15 inches long and weighs only 2.6 pounds. It blows anywhere you go. Simply remove the nozzle and pack it up. Powered by a 6-speed 5 ampere motor, this little powerhouse is capable of blowing 92.4 cubic feet per minute. At 0-12,000 revolutions per minute JetSPEED VX6 was specifically designed with the detailing professional in mind. This little machine packs some serious power. Enthusiasts love it because it’s fun, while detailers love it because it saves so much time. Engineered for the professional and enthusiast, JetSPEED VX6 comes with a soft bendable rubber nozzle that will not scratch paint. Simply reverse the rubber nozzle on it’s side and JetSPEED can be used to suck up small garbage from between seats and interiors. JetSPEED vehicle blower not only blows, it even sucks making it the best for inside and outside use.