Top 10 Siemens Residential Load Center

Siemens value pack load centers are provided with a combination flush/surface mount cover, a main breaker, aluminum bus bars, and Insta-Wire neutrals. Insta-Wire neutrals include a patented feature that allows for the screws to ship from the factory in the raised position, eliminating the need to back out the screws which saves labor. Included in the value packs are three Q120 breakers and one Q230 breaker. The Q120 breaker is a single pole, 20A breaker. The Q230 is a double pole 30A breaker. Ground bars are not included in this device and must be purchased separately if needed. If a ground bar is needed use one of the EC2GB series ground bars.

Siemens Low Voltage Residential Single-Family Metering Meter Combos up to225A EC Family S. Meter Combos Standard: UL67 V. Rating: 120/240V A. Rating: 100A Phase: 1PH Size (H x W x D): 504 No. Of Cutouts: 2S Cutout Size: 1IN Cable Entry: OH Terminal: Tin-plated AL extrusions 6061-T6.

Product Description

Siemens introduces PL Series Load Centers – a new high quality and feature-rich line of load center products to meet applications for virtually every need. The PL Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PL load centers feature the patented insta-wire neutral/ground system, convertibility, copper bussing, and mounting tabs on the trim – these features were specifically engineered to decrease installation time and increase flexibility.

From the Manufacturer

Siemens PL series of Load Centers is a premium, feature rich design. The Load Center is single phase, 120/240 Volt, 8 space, 16 circuit and is provided with a factory installed 200 Amp Main breaker, an outdoor rated enclosure, and Copper Bus Bars. Feed thru Lugs are provided for easy connection to a sub panel. There is no need to purchase ground bars as they come standard in the PL series of Load Centers.

Siemens ES series of 3-Phase load centers is the standard line of load centers. Features include 100-Percent nuetral provisions, tin plated Aluminum bus bars, combination flush/surface mount cover, and a 10 year warranty. Ground bars are not included. Use the ECGB1, ECGB2, or ECGB3 series of ground bars.

The design of this load center allows the electronic breaker neutral wires inch pig tails” to be installed from the breaker side of the neutral bar, freeing up the Wiring gutter space. This feature provides a free and clear 4 inches of gutter space making installation quick and painless. Full length neutral bars on both sides of the load center offer flexibility in circuit placement. The electronic circuit breakers come complete with pre-trimmed neutral wires, eliminating installation steps. The neutral wire seamlessly slides into the neutral bar as the breaker is Being installed allowing for a secured bolted connection. The breaker features an inch oops loop” providing extra wire if needed in the event of over-torqueing. Upgrade your service to save time and effort with Siemens wire guide load center and circuit breakers.  Other features of this load center include 1) Copper bus bars, 2) exclusive trim mounting tabs which allow the installer to hang the cover on the load center, freeing up both hands for installation, 3) exclusive Insta-Wire screws on neutral and ground bars that reduce installation time by 25%, 4) factory installed ground bars, 5) a pre-positioned bond screw which eliminates a bag, reduces risk of lost components, 6) lifetime warranty.

The MC0816B1400RLTM comes with a class 320 lever bypass meter socket. The load center portion is provided with one 200A main breaker and an 8 space/16 circuit interior with feed thru lugs. There is also a provision for an additional main breaker rated up to 200 Amps. The construction allows for the 8/16 circuits inside the panel to feed exterior loads while also providing the ability to feed up to 2 more load centers from this panel. The 2nd main breaker provision will accept the QNR type (150, 175, or 200 Amp) and QP type double pole breakers (60, 70, 80, 90, 100, or 125 Amp). The enclosure is rated NEMA Type 3R (outdoor use), confirms to UL standard 50 and is fabricated using Galvanized steel with a baked on polyester powder coating. The panel is rated for overhead or underground feed applications. For overhead feed, use the Electric enter “HD” class of hubs (EC56854, EC56855, EC56856, EC56857, or EC56858).

Siemens ES series load centers are provided with a combination flush/surface mount cover, aluminum bus bars, and are single phase. Ground bars are not included. Patented features include Insta-Wire and Visible neutrals, pre-positioned bond screw, and trim hanging tabs.

From the Manufacturer

Siemens 200 Amp, single phase, 120/240 Volt, 30 space, 40 circuit Main Lug Load Center is provided with an outdoor rated enclosure and Aluminum Bus Bars.

Product Description

Siemens introduces PL Series Load Centers – a new high quality and feature-rich line of load center products to meet applications for virtually every need. The PL Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PL load centers feature the patented insta-wire neutral/ground system, convertibility, copper bussing, and mounting tabs on the trim – these features were specifically engineered to decrease installation time and increase flexibility.

From the Manufacturer

Siemens PL series of Load Centers is a premium, feature rich design. The Load Center is single phase, 120/240 Volt, 20 space, 40 circuit and is provided with a factory installed 200 Amp Main breaker, an outdoor rated enclosure, and Copper Bus Bars. There is no need to purchase ground bars as they come standard in the PL series of Load Centers.

Product Description

The Square D Homeline 125 Amp 20-Space 40-Circuit Indoor Convertible Main Lugs Load Center with cover for Plug-on Neutral breakers includes includes a ground bar and is UL listed for residential and commercial power distribution. This load center is built with a plated, aluminum bus bar that is tested and listed only for Homeline circuit breakers. Homeline load centers are designed for the value-minded contractors, remodelers, builders and homeowners. Homeline load centers are engineered for fast installation and wire savings.

From the Manufacturer

WARNING: This product can expose you to chemicals including Lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov