The Best Ninja Bottom Blade 7 Fins

588 reviews analysed

1. Ninja Blender Replacement Parts Vodche Ninja Bottom Blade 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits Nutri Ninja Auto-iQ BL482 BL642 NN102 BL682 BL2013

Ninja Blender Replacement Parts Vodche Ninja Bottom Blade 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits Nutri Ninja Auto-iQ BL482 BL642 NN102 BL682 BL2013

Feature

2. Ninja Blender Bottom Blade 7 Fins For Nutri Ninja Pro Extractor Blade Nutri Ninja Auto iQ BL480-30 BL482 BL642 NN102 BL682 BL2013 BL640 BL642Z BL480D, Nutri Ninja Blender Auto iQ Blade

Ninja Blender Bottom Blade 7 Fins For Nutri Ninja Pro Extractor Blade Nutri Ninja Auto iQ BL480-30 BL482 BL642 NN102 BL682 BL2013 BL640 BL642Z BL480D, Nutri Ninja Blender Auto iQ Blade

Feature

Description

Blender Bottom Blade (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.

KIND REMINDER BEFORE PURCHASE:

1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.

NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.

TIPS FOR USAGE

1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage)
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender

3. Blender Replacement Parts for Ninja, Bottom Blade 7 Fins and 1 Gasket Rubber for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade (7 fins)

Blender Replacement Parts for Ninja, Bottom Blade 7 Fins and 1 Gasket Rubber for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade (7 fins)

Feature

4. Blender Replacement Parts 7 Fins Bottom Blade For Nutri Ninja Auto iQ BL480 BL642 NN102 BL682 BL2013 BL680A BL682 BL491 BL640 BL642 Nutri Blender Parts (7 Fins-4 Inch)

Blender Replacement Parts 7 Fins Bottom Blade For Nutri Ninja Auto iQ BL480 BL642 NN102 BL682 BL2013 BL680A BL682 BL491 BL640 BL642 Nutri Blender Parts (7 Fins-4 Inch)

Feature

Description

Color:7 Fins-4 Inch

One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender.

KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it

2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102,

NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.

TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage)
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender

5. Blender Bottom Blade Assembly 7 Fins and 1 Gasket Rubber Replacement Parts Compatible with Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Extractor Blade Replace 409KKU641

Blender Bottom Blade Assembly 7 Fins and 1 Gasket Rubber Replacement Parts Compatible with Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Extractor Blade Replace 409KKU641

Feature

Description

Specification:
Brand: BTNTVEN
Condition: 100% Brand New and never used
Package Includes:
1 x 7 Fins Blender Blade Assembly, 1 x Extra Gasket Rubber.

Fits The Following Nutri Ninja Blender Models :
For Nutri Ninja BlendMax DUO with Auto-iQ Boost (BL2012, BL2013)
For Nutri Ninja Auto-iQ (BL480, BL480D, BL481, BL482)
For Nutri Ninja Auto-iQ Complete Extraction System (BL486CO)
For Nutri Ninja Auto-iQ Pro Complete (BL487, BL487A, BL488W)
For Nutri Ninja Auto-iQ Blender (BL490)
For Nutri Ninja Auto-iQ System (BL491, BL492)
For Nutri Ninja Auto-iQ Compact System (BL492W)
For Nutri Ninja Ninja Blender DUO with Auto-iQ (BL640, BL641, BL642, BL642W, BL642Z)
For Nutri Ninja Blender System with Auto-iQ (BL680, BL680A, BL682)
For Ninja Intelli-Sense Blender Duo (CT640C, CT641)
For Ninja Intelli-Sense Kitchen System (CT680, CT680A, CT680SS, CT680W)
For Ninja Intelli-Sense Kitchen System with Auto-Spiralizer (CT682SP)
For Nutri Ninja Nutri Bowl DUO with Auto-iQ Boost (NN100, NN100A, NN101, NN102)

If you have any problem about your order, please feel free to contact us.

6. Blender Replacement Parts Ninja Bottom Blade 7 Fins and 1 Gasket Rubber for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade (7 fins)

Blender Replacement Parts Ninja Bottom Blade 7 Fins and 1 Gasket Rubber for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade (7 fins)

Feature

Description

One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender.

Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.

BEFORE PURCHASING please check your existing blade for the following:

1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it

2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.

NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.

Pay attention to before use:

1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance

2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it

3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage)

4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line

5. Place the replacement blade onto the cup and screw it tightly until you have a good seal

6. Please make sure it in right place and locked tightly

7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender

7. 2 Pack Ninja Blender Replacement Parts Vodche Ninja Bottom Blade 7 Fins Replacement Extractor Blades Part for Nutri Ninjia Blender Blade fits Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013

2 Pack Ninja Blender Replacement Parts Vodche Ninja Bottom Blade 7 Fins Replacement Extractor Blades Part for Nutri Ninjia Blender Blade fits Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013

Feature

8. Replacement Parts Ninja Bottom suitable for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade (Black)

Replacement Parts Ninja Bottom suitable for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade (Black)

Feature

Description

Color:Black

Color:Blade 7 Fins

 

Description:

Item Type: Ninja Blender Replacement Parts for blender

Blade material: stainless steel

Blade shape: Cross blade

*This Ninja Blender Accessories Suit for:

BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.

*Not fit for :

BL660,BL663,BL740,BL770,BL771,BL773CO,BL780,BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.

 

NOTE:

Two conditions must be met at the same time before purchase:

1: Your original motor base must be 7 fins;

2: Your blender model must identity with our stated model.

The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base:

There are too many models of ninja blender blade, if any character is difference, please don’t purchase it.

Note: You are recommended to replace your ninja blender every 6 months or as needed for optimal performance.

Pay attention to before use :

Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it.

Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding a leak)

Do not overfill! To avoid spilling, do not add ingredients past the Max fill line.

Place the replacement blade onto the cup and screw it tightly until you have a good seal.

Please make sure it in right place and locked tightly.

Do not run your blender over 4 minutes at a time to prevent overheating of the blender.

Packing including:

1 x Ninja blade Replacement

9. Replacement Parts Ninja Bottom Blade 7 Fins for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade (7 fins)

Replacement Parts Ninja Bottom Blade 7 Fins for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade (7 fins)

Feature

Description

One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender.

Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.

BEFORE PURCHASING please check your existing blade for the following:

1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it

2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.

NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.

Pay attention to before use:

1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance

2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it

3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage)

4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line

5. Place the replacement blade onto the cup and screw it tightly until you have a good seal

6. Please make sure it in right place and locked tightly

7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender

10. Ninja Blender Replacement Parts Ninja Bottom Blade 7 Fins and 1 Gasket Rubber for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade (Blade 7 Fins)

Ninja Blender Replacement Parts Ninja Bottom Blade 7 Fins and 1 Gasket Rubber for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade (Blade 7 Fins)

Feature

Description

One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.

KIND REMINDER BEFORE PURCHASE:

1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it

2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.

NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.

TIPS FOR USAGE

1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance

2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it

3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage)

4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line

5. Place the replacement blade onto the cup and screw it tightly until you have a good seal

6. Please make sure it in right place and locked tightly

7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender

Conclusion

By our suggestions above, we hope that you can found Ninja Bottom Blade 7 Fins for you.Please don’t forget to share your experience by comment in this post. Thank you!