The Best Maytag Dryer Won’t Start

This indoor dryer vent is designed to capture the lint from your electric clothes dryer, for those unable to vent to the outside. All types of indoor dryer vents will allow heat and humidity into the room. We recommend the user allow for air circulation and ventilation when operated in confined spaces. This patented double filter system does not use water, eliminating messy cleanups. The stainless steel screen acts as a pre-filter capturing large lint particles, pet hair, etc. and can be cleaned with a sweeping motion of the hand. The polyester filter will capture the finer lint dust and can be vacuumed clean for extended use or replaced when fully loaded with lint. Replacement filters are available in packages of 6, lasting most users up to a year under normal conditions. There is a patent pending “safety vent flap” designed to open, as a reminder to clean the screen and filter. For renters or homeowners concerned with dryer lines that exceed the dryer manufacturer’s recommendations, resulting in inefficient operation and lint accumulation, this is a great solution. Saves energy in colder months by returning warm dryer air into the room. All installation hardware included. Customer supplies hose and clamps. Installation is quick and easy, instructions included. If you’ve purchased this product in the last 30 days and one or both of the side clips is broken, please reach out to [email protected] for a replacement.

This 010149 Zero Periscope is specifically designed for use in situations where the dryer Outlet overlaps or is very close to the wall Outlet. The 2 inch by 6 inch smooth aluminum construction telescopes to handle outlets up to 5 inches distance from center to center. The 4 inch diameter draw band collar synchs down over the clothes dryer vent i.e.. The 4 inch diameter crimped fitting slides into most wall ies. Once installed, it needs only 2.5 inches clearance behind the dryer. If your outlets are very close and you need to move the dryer closer to the wall, this vent maintains critical airflow and provides all metal performance. Clothes dryer manufacturers specify “only rigid or flexible metal vent shall be used for exhausting. Do not use plastic or metal foil vent.” installation instructions are included inside each carton. The zero periscope is built in the USA by Builder’s Best, Inc.

Flexible Dryer Hose with 2 enhanced worm clamps – 10 Feet when full extended

Product description

DRYER VENT PERISCOPE FROM 29″ TO 77″ WITH 2 1/2″ WALL CLEARANCE. WHIRLPOOL

From the Manufacturer

This item is designed to fit between the studs inside the wall. It does a great job of carrying the exhaust air through the top plate and into attic/floor space. You should use the 4″ aluminum vent to complete the run to the outside. This dryer vent rough-in system has (3) 2-1/2″ clearance telescoping sections that extend from 29″ to 77″. It also has one male snap-lock fitting, one female snap-lock collar and mounting strap, as well as all-metal rigid construction that meets most in-wall codes.

If your dryer hasn’t been doing its job and is constantly leaving your clothes wet or damp, it may be time to invest in one of our amazing connector products. At ZIGGURAT we strive to provide a safe and easy alternative for dryer accessory parts that will make sure that your dryer connections are secure and working at maximum capacity. Let this simple dryer vent duct connector kit be your next purchase. Not only does this item ensure safety with it’s easy to clean capabilities that help prevent dryer fires, but it is also built with products and materials all based in the USA to ensure top quality. The simple snap on feature of this dryer vent hose connector kit makes the installation quick and easy for everyone. There’s no need for tools of any kind or an attachment clamp. Connecting this attachment to your dryer couldn’t be easier, and our products are built to last. There will be a snug fit both to your appliance and to the wall as it grips tightly to ensure connection security. Our universal dryer connectors are made of soft rubber and other sturdy materials to make sure that no breaking, ripping, or crushing occurs when the connector is in use. This specific dryer vent connector kit is sized at 8 x 4 x 5 inches to give a great connection without extra bulk. Save yourself time and hassle with our efficient and powerful dryer wall connectors. Once you have witnessed or used one of our dryer connectors you will see why our products are the best. Make sure you get your clothes dried efficiently and safely for many years to come with ZIGGURAT products like this durable Snap to Vent Master dryer connector kit.

The MV-90 is designed for when the vent path takes a 90 degree turn, such as down through the floor, up through the ceiling, or off to the side. -The MV-90 can handle offsets up to 3 inches from center to center. The more accurately you line up the MV-90 with the vent on the back of your dryer, the better the vent path and the further back you can locate your dryer. Normally, the MV-90 requires 5 1/2 inches of clearance behind the dryer. If an obstruction necessitates you locate the MV-90 at the maximum 3 inch offset, then your dryer will need to sit out an additional 3 inches to allow for a bend radius in the transition duct. -Close vent offsets between dryer and wall vent located on same wall as dryer (Offsets between 6-9 inches): The MV-90 can be coupled directly to a standard 4 inch diameter, adjustable, 90 degree elbow which creates a 9 inch offset. See photo below. If your same wall offset is 6 inches, you can use the MV-90 and an elbow, taking advantage of its ability to handle misalignment up to 3 inches. -Same wall offsets greater than 9 inches: Simply mount the MV-90 directly behind your dryer, plug the 90 degree elbow into the wall vent, and measure for the required length of rigid metal pipe between them. Make sure to measure from where the pipe will stop on the MV-90 to the stop on the male end of the rigid metal pipe. -Close vent offsets between dryer and wall vent located on same wall as dryer (Offsets between 0-3 inches): If your same wall offset is between 0 and 3 inches, then the MV-180 is the product for you.