Top 10 Legacy Pressure Washer Hose

Schieffer 4000 PSI Black 3/8″ x 50 FT 1 Layers of High Tensile Wire Braided Rubber Wrapped Pressure Washer Hose with Couplers

An economical choice for a pressure-washer hose. Designed for flow ratings of 2.5 to 5 GPM commercial cleaning applications. Rubber construction throughout, with a single layer of steel-wire braid.

Hose Construction

• Inner Tube: Synthetic rubber
• Reinforcement: One layer of high tensile braided steel
• Cover: Wrapped finish with an embossed lay line
• Temperature Range: 250°F Maximum
• Applications: Suitable for commercial pressure cleaning applications
• **Not for steam service**

Hose Specifications:

• Hose Length: 50′
• Hose Size: DN 10 – Dash -06
• Hose Connection: 3/8″ Quick Connect Female Brass Socket & 3/8″ Steel Plug
• Hose I.D: .40″ (10.1mm)
• Hose O.D: .67″ (16.9mm)
• Working Pressure: 4000 PSI – 276 Bar
• Proof Pressure: 8000 PSI – 552 Bar
• Burst Pressure: 16000 PSI – 1104 Bar
• Bend Radius (MIN): 3.54″ (90mm)
• Impulse Life: 200,000+

Schieffer Quality Guarantee: Schieffer is an ISO 9001:2008 certified in 2012, The company continues to implement and embrace the most modern practices of quality and continuous process improvement. Each batch is quality tested to meet or exceed expectations.

Extreme flexibility under pressure! Flexzilla offers a revolutionary pressure washer hose that redefines flexibility, even under pressure! Unlike other pressure washer hose, Flexzilla stays flexible when pressurized for use and offers minimal memory when depressurized, so it lays flat and won’t work against you before, during or after use.

JGB Eagleflex II is specially designed for use on pressure washer machines with working pressures up to 6000 psi and temperatures up to 310°F. Synthetic rubber tube, resistant against cold and hot water with usual cleaning agents. Two braids of high tensile steel wire reinforcement. Abrasion and ozone resistant synthetic rubber cover. 6000 PSI Working Pressure, 18,013 PSI Burst Pressure.

Monster hoses are made with a dual-braided construction of steel over polyester and jacketed with translucent polyurethane for high strength, durability. They are equipped with quick connect fittings for quick and easy setup 3/8” Male quick connect plug x 3/8” Female quick connect socket. Translucent polyurethane outer jacket is non-marring, abrasion resistant, and designed to fit most gas pressure washers with standard quick connections. Up to 140°F maximum temperate water, these are used as an original hose replacement or an extension of an existing hose. 90 Day limited accessory

Raptor Blast 6000 PSI BLACK 2 Wire Braid Pressure Washer Hose 100ft. & Couplers

• 6000 PSI Max
• 2 Wire Braid
• 275° Max Temperature
• Size: 3/8"
• Length: 100′
• Inlet: 3/8" Plug
• Red Bend Restrictors
• Outlet: Swivel End w/ 3/8" Quick Connect

Flexzilla is a revolutionary hose featuring a Flexible Hybrid Polymer material that redefines flexibility. This engineered polymer-blend material permits use in environments where general purpose PVC and rubber hose may become too stiff. Flexzilla hose characteristics offer zero memory allowing it to lay flat. It won’t work against you during operation and coils easily after use. Flexzilla offers extreme all-weather flexibility, even in subzero conditions, and is ideal in both hot and cold environments where tight radius bends are needed.