Finding your suitable readers for kegerator that fits 1/2 and 1/6 is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for kegerator that fits 1/2 and 1/6 including detail information and customer reviews. Let’s find out which is your favorite one.
676 reviews analysed
1. Bev Rite CPCCM198SS Connector Kit For Beer Line With Wing Nut and Elbow Tailpiece, Stainless Steel Contact (304 Grade)
Includes all four items needed to connect a beer line to your draft beer system. Includes 1 of each for 1 connection: Beer Wing Nut, Washer, SS Elbow Tail piece to connect to 3/16” ID tube and Clamp. Wing Nut can be tightened by hand eliminating the need to have a wrench available. Elbow Tail Piece is useful where space is limited so that beer line will not need a sharp bend. Tail Piece is made of 304 Grade Stainless Steel which is more sanitary and durable. This ensures that contact with beverage is 304 Grade SS. Good for use with Beer, Wine, Coffee, Water etc.
2. Danby DKC054A1BSL2DB Dual Tap Keg Cooler, Steel
- 5.4 cu. ft. (153 litres) capacity
- Spotless steel finish – looks identical to real stainless steel but without the smudging
- Automatic defrost for hassle-free maintenance
- Keg cooler includes a single gauge regulator, CO2 tank and all required hardware
- Optional swivel castors for easy portability
Whether you are a beer drinker or an avid entertainer you will be the best party host with this ultimate indoor freestanding kegerator by Danby Appliances. This dual tap keg cooler is an exceptional addition to any wet bar, game room or man cave and provides the convenience of two different cold beers on tap at once. It uses R600A refrigerant and has an automatic-defrosting system which makes for an excellent product with hassle-free maintenance. This keg cooler includes a single gauge regulator, CO2 tank and all required hardware. It has a precise mechanical-thermostat to keep your beer cold and a spotless-steel finish resembling stainless-steel but much easier to clean. Did we mention it has a scratch-resistant worktop? Furthermore, this unit includes an American Sankey coupler, a chrome guard rail and drip tray, and optional swivel castors for easy portability. The door hinge is reversible which allows you to adjust it for either left or right-handed opening.
3. Jansamn BF BLCP-CS-WC Disconnect MFL 1/4 Thread, Ball Lock Fittings, with Hos Keg Coupler, 2 PCS, Gery
- ★ Well Made ★ 1. The keg quick disconnect & hose clamp is made of high quality ABS plastic. And the swivel nuts is made of food grade stainless steel
- ★ Great For Ball-lock Type Fitting ★ This ball lock disconnects are designed for connecting to ball lock Cornelius (Corny) Kegs & Keg Coupler Adapter for home brewing
- ★ Easy To Differentiate & Install ★ The grey is used for gas (inlet) and the black is used for fluid (outlet). You need pull up a lever on this ball lock disconnect , and then push down on the correct ball lock. Gas/Liquid will flow through once connected
- ★ Come With The Barbs & Hose Clamp ★ 4. The barb’s OD is 5/16″. It is fitted for 1/4″ hose. You can use the hose clamp to tighten your hose to keep good seal. The hose clamp is free
- ★ 1 Year ★ Place your order without any worry. If any issue happens to your bag in the first 12 months, We can replace a new one for you without any fee
- Included Components: Ball Lock Home Brew Keg Connectors, Hose Clamp
Features> ★ The ball lock disconnect is designed to connect to a ball lock Corney keg not a pin lock keg ★ the ball lock disconnect is leak-free with Hand-Tightening and easy to use ★ before using these ball lock disconnects, you’ll want to tighten up the swivel nut connecting the flare fitting packaged> 1 * liquid ball lock disconnect 1 * Gas ball lock disconnect 2 * 5/16” barbed swivel nuts> 2 * hose clamps
4. PicoBrew KEG1GSERV Serving Keg, Silver
This reusable keg is the perfect size to serve your pico-brewed beer, whether you’re enjoying it at home, or taking it to a party! the compact 1. 25 us gallons (5-liter) capacity keg holds a full batch of pico beer for chilling, carbonating, and serving.
5. Kegco KMKCAL Keg Coupler Adapter, Liquid
- This Kegco keg coupler adapter makes it easier than ever to dispense both store bought beer and your own home brew using the same dispense system
- Adapter fits onto the liquid-out side of all industry standard keg couplers and allows you to connect a liquid ball lock coupler to the post
- No more messing with tubing connections on a standard Sanke conversion kit or continuously tapping and untapping the Sanke keg
- Now you can seamlessly switch between your ball lock corny keg and a comercial Sanke keg in seconds!
- These Sankey to ball lock disconnects are the best solution for dispensing several beers that you have on tap at once
It’s never been easier to dispense both store bought beer and your own home brew off of the same system. This Sankey to ball lock keg coupler liquid post adapter allows you to switch your beer line between commercial kegs and Cornelius home-brew kegs in seconds. It’s as simple as screwing the conversion fitting onto your Sankey coupler and then installing your liquid-out ball lock coupler on the post. If you want to make use of both sides of your Sankey coupler ball lock, you will also need a gas post. There are many advantages to this beyond just being able to switch back and forth between Sanke kegs and corny kegs. Probably the biggest advantage is you don’t have to mess with the tubing connections like you would on a standard Sanke conversion kit. Also, you don’t have to continuously tap and untap the Sanke keg when switching back and forth. These Sankey to ball lock disconnects are the best solution for dispensing several beers you have on tap, at once.
6. 4 Pieces Feeding Tube Brushes, Cleaning Brushes, 32 Inches Long with Soft Nylon Bristles Head, Suitable for Cleaning Feeding Tubes and Racking Lines (1/6 Inch in Diameter)
- Long length: bristles head is about 1/6 inch in diameter, the total length of the test tube brush is 32 inches, which is helpful for cleaning your feeding tubes and other long tubes
- Durable material: this tube cleaner brush is made from stainless steel and nylon bristles head, which can softly scrub away buildup and avoid destroying the tubing
- Flexibility: the wire tube brush is flexible to even work for curved tubing that angled less than 90 degrees
- Easy to feed the brush end first into the tubing
- Innovative design: the end of this cleaning brush has conservatory design, protecting from hurting yourself and scratching the items
- It is available to work on any surface
- Efficiency: the tubing wire brush will improve your work efficiency in washing tubes and so on, highly save your time and effort
4 Pieces feeding tube brushes, cleaning brushes, 32 inches long with soft nylon bristles head, suitable for cleaning feeding tubes and racking lines
Durable, flexible, efficient.
The feeding tube brush can clean your feeding tubes, racking lines and so on.
This tube cleaner brush is made from stainless steel and nylon bristles head, which can softly scrub away buildup and avoid destroying the tubing.
The end of this cleaning brush has conservatory design, protecting from hurting yourself and scratching the items.
It is available to work on any surface as you need.
Size: 32 inches in total length
Color: clear, as the picture shown
4 x Feeding tube brushes
7. 【2 Pairs】MRbrew Ball Lock Disconnect Set, Home Brew Ball Lock Keg Fittings with MFL Thread Swivel Nuts, Corny Keg Fittings with Stainless Steel 5/16” Gas & 1/4” Liquid Barbs & Extra 4 Hose Clamps
- 【MFL QUICK DISCONNECT】MRbrew threaded beer cornelius keg ball lock disconnect fittings come with MFL swivel nuts, make hose changing and extra equipment adding a breeze, allow more options of extra functions and possibilities for your kegging system!
- 【BUY ACCESSORIES SEPARATELY? NO!】MRbrew ball lock fittings comes with complete sealing and hose connection parts, 5/16” barb for connecting gray disconnect to gas hose, 1/4” barb for connecting black disconnect to liquid hose, clamps guarantee no leak on connection!
- 【YOUR LONG-LASTING USE CHOICE】MRbrew ball lock fitting set is made of stable PBT material, it has strong oil resistance, its smooth surface makes cleaning easy. Stainless steel has strong corrosion resistance, not easy to get rust. MRbrew makes your beer brewing more economy!
- 【POWERFUL APPLICATION KIT YOU NEED】MRbrew ball lock keg fitting is perfect for most Cornelius Keg, Pepsi Keg and 7-UP tanks, also can be a home brewing adapter of Corny & Keg coupler, suitable for beer, soda, and other beverages dispensing!
- 【100% LIFELONG IUUSES SOLVING FOR YOU】Each MRbrew ball lock keg fitting set is backed by unbeatable, reliable, trusted product quality and customer service, please feel free to contact us if you are not satisfied, we will unconditionally solve for you!
MRbrew BALL LOCK KEG FITTINGS, HIGH QUALITY GUARANTEE
Easy to install, easily disassembled for cleaning and maintenance purposes
★It is recommended to use regulator with a check valve when using ball lock fittings, because
▷ball lock fittings do not have a built in check valve and check ball
▷Can avoid beer backflowing into the gas regulator and possibly causing damage
★These disconnects come as pairs, each pair comes with two barbs, and two nuts
▷The Gray disconnect is (gas) in, the Black disconnect is (liquid) out
▷The barbs are not interchangeable between the swivel nuts
▷One is 1/4″ barb for 1/4’’(3/16″) ID beverage line, another is 5/16’’ barb for 5/16″ ID gas line
▷Two barbs has same 1/4″ female swivel nut, but 5/16″ barb female swivel nut has a larger hole
★Some keg lube can be great help when you attach ball lock fittings to the ball lock posts
LEAK PREVENTION TIPS
Gas (gray) disconnects needs more care to avoid leaks
Try a nylon flare washer If you find leaks at the flare connection(barbs and nuts are paired correctly)
YOU WILL SURPRISINGLY GET
4*1/4’’ Swivel nut
4*Ball lock keg disconnect
Please confirm what you buy is MRbrew brand coffee faucet!
Please choose “Sold by Forever supplier and Fulfilled by Amazon” when purchasing!
Other sellers sell fake and inferior products without quality assurance!
8. 2.5 Gallon Amcyl Keg New Ball Lock Single Handle
9. Home brew Keg Cooler. Beer Cooler for 5 gallon Keg, Corny and Cornelius Kegs from Cool Brewing. CoolBrewCorny
- The ONLY home brew keg cooler for a 5 gallon and 1/6 keg! IMPROVED 2.0 version! Excellent quality and durability.
- Keep the quality of your home brew while transporting and serving using our beer coolers! Now, padded, removable straps! Serve cold brew coffee and kombucha as well!
- Kegs USED to be more difficult to transport and share; now just hook up a picnic tap and take your homebrew and keg anywhere! Easily serve at parties, graduations, golf courses, weddings, beaches, tailgates and farmers markets!
- Kegging your home brew saves hours of time, space and mess over bottling! Now, contains tap holder!
- Keg and ice blanket NOT included. Save $ w/our BUNDLE OPTION that includes the ice wrap!
*Your PARTY will never be boring when you bring your CoolBrewCorny!
*Sized for CoolBrewCorny 5G and Sixth Barrel Kegs as follows: 12”*26.5” (D*H) Inches. Extra room for Cool Brewing Keg Cooler Ice Wrap or ice.
*Includes removable patent pending puncture proof bottom for extra durability.
*Durable flexible polyester exterior.
*Shoulder strap for easy transport. CoolBrewMini has extra straps.
*Zipper on top for easy access to tap and hoses.
*Thick insulation with the ability to keep kegs cold for hours. Great for the beach and outdoor settings.
CoolBrew Keg Coolers are specifically designed to work with ball lock, pin lock and Sanke connections.
*Coolers are 100% waterproof.
*Each CoolBrewing sale funds our CoolerGiving Campaign! We fill our coolers with food for families in need!
10. PERA Ball Lock Disconnect Set with 5/16 Swivel Nuts for Gas, 1/4 Barb for Liquid
- Ball Lock Style Quick Disconnect – Liquid with 1/4 Barb Fitting,Gas with 5/16 Barb Fitting
- The Body of Ball Lock Disconnect is Made of Plastic PBT, Barb is Stainless Steel Material
- Installing the Ball Lock Quick Disconnect is Remarkably Simple. While Pulling up on Collar, push the Coupler over the keg’s Post and Let Go
- Ball Lock Style Quick Disconnects are Used for Most Cornelius, Pepsi Kegs
- Quality Guarantee, Any Problem for the Keg Disconnect, Money Back or Replacement Guarantee.
Ball Lock Gas Disconnect MFL 1/4″ with 5/16″ Swivel Nut Ball Lock Liquid Disconnect Barb 1/4″ Usually Connect Cornelius or Corny Keg
By our suggestions above, we hope that you can found Kegerator That Fits 12 And 16 for you.Please don’t forget to share your experience by comment in this post. Thank you!