The Best Kegerator Regulator Not Showing Pressure

The TAPRITE ADVANTAGE Taprite regulators are built and tested in accordance with UL Standard 252 for compressed gas Regulators and UL 252A for compressed gas regulator accessories All Taprite regulator components and accessories are inspected by our Quality Department upon receipt in accordance with the requirements of MIL-STD-105E High CO volumetric flow provides continuity in product dispensing Polycarbonate bonnet will not chip, break, or fade 10 Micron Filter built in to keep contaminants out of regulator One repair kit for primary and secondary regulators. WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING.

The Kegco 542 Pro series works with any Co2 Tank with a CGA-320 valve and measures PSI, as well as the volume of the Co2 gas in the Cylinder. The regulator body is constructed of forged brass with all brass connections and components, a sintered brass inlet filter, integrated nylon tank connection washer (and spare) and self resetting safety release valve. Both gauges feature an easy to read design. The top gauge lets you know how much Co2 Pressure is in the keg and displays 0-60 psi. The second gauge lets you know how much Co2 gas is left inside the Co2 Tank and features a 0-2000 display. A large adjustment knob with a lock ring allows gas flow to be changed without the need for a screw driver. This regulator includes a tamper proof safety pressure relive valve that releases at 45 psi. There is also a shut off valve that allows for instantly shutting off pressure to the keg without backing up your gas line.

This Pro Series dual-output double gauge regulator is loaded with high end features! If you plan on dispensing two separate kegs but do not need to have independent keg pressures, then this regulator will work for you. This regulator has a Y splitter with two independent shut off valves, so you can still run a single keg if you want to. The Pressure Adjustment Knob can be turned by hand so it does not require tools. It also features a pressure release valve so you can release pressure from the system at the regulator. This is great a great feature if you have a keg coupler that does not include a pressure release valve.

WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING. You can use this low-pressure regulator on any CO2 tank with a CGA-320 valve. CO2 tanks have a male thread (CGA-320); these regulators have a female thread. This regulator features dual gauges to measure psi as well as the volume of CO2 in the cylinder, indicating how much CO2 is left in the cylinder and when you should have it refilled. The knob on the front is used to adjust the output pressure. The red polycarbonate bonnet will not chip, break or fade. There is a non-adjustable shut down built into the body of the regulator. The high-pressure ports have left-hand female threads to prevent their use as a low-pressure outlet. The non-removable adjusting screw is designed so that when it is turned all the way in the maximum downstream delivery pressure will not exceed 50psi, with a safety blow off at 60psi. Internal relief valve opens whenever delivery pressure exceeds set pressure by 15psi. This feature serves as a warning that the seat or diaphragm may be worn or damaged and should be replaced. Sintered metal flow control filter in the inlet nipple to prevent dirt and other particles from damaging internal regulator parts. The permanent Quad-Ring Seal on the inlet nipple helps eliminate a source of leaks, so there is no need to use a new fiber washer each time the tank is changed. Outlet features NADS 1600C shutoff which eliminates a source of gas leaks. The duck bill check valve helps prevent product back up into the regulator, a common cause of malfunction in the regulating and relief valve parts. Hose barb end designed for use with 5/16 inch I.D. pressure tubing. All regulators are pressure tested to assure in-field reliability. The seat assembly is easily replaceable, so there is no need to remove the regulator from the tank. Bullets change to: Low pressure gauge (the top gauge) indicates output pressure to the keg The low pressure regulator allows for an adjusted pressure from 1 to 50psi, the maximum downstream delivery pressure will not exceed 50psi High pressure gauge (the side gauge) indicates CO2 tank pressure remaining Duck bill check valve helps prevent product back up into the regulator Assembled and Tested in the USA

MRbrew Double Gauge CO2 Keg Regulator, which has been specially designed to provide maximum convenience and durability in busy commercial environments
like bars, tasting rooms, and restaurants.

✮ The MRbrew regulator works with any Co2 Tank with a CGA-320 valve.
✮ Both gauges feature an easy to read design.
✮ The top gauge lets you know how much Co2 Pressure is in the keg and displays 0-60 psi.
✮ The second gauge lets you know how much Co2 gas is left inside the Co2 Tank and features a 0-3000 display.

So you’ll never be caught off guard by an empty CO2 tank again.

✮ This brewery-grade regulator features a multi-stage body for more precise control when making small adjustments to the output pressure.
The first stage reduces the output pressure from the tank to a more manageable pressure, and the second stage fine tunes that pressure for output to the keg

Allowing adjustments to be optimized for the operational range of beer, wine, coffee or whatever you’re dispensing. A large adjustment knob allows you to make
quick and accurate adjustments by hand and turns effortlessly, even in freezing temperatures.

✅ The regulator body is constructed of forged brass with all brass connections and components, a sintered brass inlet filter, integrated nylon tank connection
washer (and spare) and self resetting safety release valve.
✅ 5/16″ barbed output for use with 5/16″ ID hose
✅ Integral safety pressure relief valve releases at 45 PSI
✅ Large hand control makes it easy to adjust the presure inside keg
✅ Inlet nipple has a permanent thick nylon seal that eliminates one source of leaks, so you will not need to use a new fiber washer every time the tank is changed

✮Regulators are all pressure tested to assure reliability in the field

✮What You Get: MRbrew Keg Regulator, Welcome Guide, Our Worry-free 45 Days Money-back 18-month Warranty and Friendly Customer Service.

IMPORTANT NOTE: IF YOU ORDER THIS ITEM SHIPPED FROM CHINA, YOU MAY RECEIVE IT IN 4-7 DAYS.

All indications showing this exclamation mark are important safety instructions.
1.Flowmeter complies with all current relevant technical regulations and meets all existing standards.
2.The flowmeter may under no circumstances be modified or tampered with without the written consent of the manufacturer.
3.Intermediary connections between the cylinder valve and the cylinder pressure regulator are strictly forbidden.
4.Incorrect use may endanger the operator and the other personnel, damage to the cylinder pressure regulator and the installation may also result.

Operating instructions

1.Keep hands and tool clean, oil and grease can cause an explosion on the contact with oxygen.
2.The operator should be fully familiar with these operating instructions prior to the use of this equipment; all instructions should be adhered to when in use.
3.Check that the flowmeter is suitable to the gas to be used.
4.Check that the cylinder value connection is clean and undamaged, if not, you must not connect cylinder pressure regulator.
5.Before connecting the cylinder pressure regulator, the cylinder valve should be swiftly opened and closed to dislodge water or foreign from the valve/regulator inlet seating. Do not stand in front of the cylinder valve and do not hold your hand before the cylinder valve.