Finding your suitable readers for hotsy hot water pressure washer is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for hotsy hot water pressure washer including detail information and customer reviews. Let’s find out which is your favorite one.
533 reviews analysed
1. NorthStar Gas Wet Steam and Hot Water Pressure Washer – 3000 PSI, 4.0 GPM, Honda Engine
2. SIMPSON Cleaning Wrapped Rubber 41184 3/8” x 50′ at 8000 PSI Hot water hose
Designed for performance, wrapped rubber hose is single steel braided and designed for high temperature applications up to 250°F. Constructed of dual-braided steel and jacketed with wrapped rubber for high strength, durability and kink resistance. 90 Day limited accessory warranty
3. NorthStar Electric Wet Steam and Hot Water Pressure Washer Add-on Unit – 4000 PSI, 4 GPM, 115 Volts
- Upgrades a cold water pressure washer into a hot water/steam pressure washer
- For pressure washers from 2-4 GPM and 4000 PSI max.
- Diesel burner heats water up to 250deg F
- Diesel burner has 1/2in. Schedule 80 heating coil, temperature control and 4-gallon fuel tank
- 5-ft. quick-couple hose connects to pressure washer pump
4. NorthStar Gas Wet Steam and Hot Water Pressure Washer – 2700 PSI, 2.5 GPM, Briggs & Stratton Engine
5. Annovi Reverberi AR630-HOT Ar North America Pressure Washer, Hot Water Black
Specifications: • 1900 Max PSI • 2.1 Max GPM • 19 amps • 120V 60Hz Induction Motor Equipped with: Triplex pump with ceramic plunger Pressure adjustment Built-in detergent injector Pressure Gauge Motor thermal protector 25’ High-pressure hose Spray gun and lance Vari-spray nozzle head 21.7 Power cord with GFCI
6. SIMPSON Cleaning Armor 41096- 3/8" x 100 PSI Hot and Cold Water Replacement/ Extension Hose
- Dual-braid Technology
- 3/8″ Male quick connect plug x 3/8″ Female quick connect socket
- Rated up to 250°F/ cold and hot water
- Designed to fit most gas pressure washers w/ quick connect
- Translucent polyurethane outer jacket is non-marring and abrasion resistant
- Designed for high temperature applications up to 250°F
- 3/8″ x 100′ 4500 PSI replacement/extension hose
- No tools required
- Steel and polyester-braided high pressure hose for hot and cold water pressure washers
- Dual-braid construction of steel over polyester and jacketed with polyurethane
- Steel and polyester braid reinforcement for high strength, durability, and kink resistance.
- Equipped with quick connect fittings for quick and easy setup – 3/8″ Male QC Plug x 3/8″ Female QC Socket
- Polyurethane outer jacket is non-marring and abrasion resistant
- Designed to fit most gas pressure washers with standard quick connections
- Original hose replacement or an extension of an existing hose
- 4500 PSI Max 250°F Max
Armor hot water hoses are designed for high temperature applications up to 250°F. Made with a dual-braided construction of steel over polyester and jacketed with polyurethane for high strength, durability and kink resistance. They are equipped with quick connect fittings for quick and easy setup 3/8” Male quick connect plug x 3/8” Female quick connect socket. Polyurethane outer jacket is non-marring and abrasion resistant. Our Armor hot water hoses are designed to fit most gas pressure washers with standard quick connections. 90 Day limited accessory
7. Easy-Kleen Professional 4000 PSI (Gas – Hot Water) Pressure Washer w/ Honda Engine & Electric Start (12V Burner)
Commercial Hot Water, 3.5 GPM at 4000 PSI, 13 HP Honda Gas Engine, Schedule 80 Heating Coil, 12 Volt Wayne Burner, Powder Coated Frame with 13″ Pneumatic Tires. Most popular and versatile unit. Utilized by a multitude of businesses for a wide variety of cleaning.Includes 36″ gun/wand assembly with quick coupler system, downstream chemical injection, 50 ft of 3/8″ High Pressure Hose and five Quick Connect Nozzles.
8. Tool Daily Pressure Washer Hose, 3/8 Inch x 50 FT, Quick Connect, 4000 PSI, High Tensile Wire Braided
- Pressure washer hose 50 FT is made from upgraded high tensile Steel-Wire Braid, Scuff and mark resistant construction for prolonged service life. No leaking.
- Max Working Pressure is up to 4000 PSI. Burst Pressure is up to 16000 PSI. Flow rate is from 2.5 GPM to 5 GPM. Max Temperature is up to 176 F.
- Power washer hose extension fits most pressure washer models. The 3/8 pressure washer hose has 3/8″ quick connect female socket and 3/8″ plug. Easy to connect and disconnect.
- Pressure washer hoses is 50 FT X 3/8 Inch. Bend radius of the hose is 4.7 inch.
- Application: 4000 PSI pressure washer hose is used for residential and commercial washing, such as washing car, floors, motorcycle, windows, siding, driveways, and roofs.
9. Pressure Washer Hose 3/8" x 50′ 4000 psi with Quick Connects – Industrial
Fits many consumer & contractor pressure washers – Heavy Duty ConstructionSingle steel braid reinforced for long lifeMaximum water temperature 275° F3/8″ Quick Connectors Installed, One male connector, one female connectorSwivel on one end helps keep hose from kinkingFits Thousands of pressure washer brands, including Karcher, Craftsman, Generac, Troy Bilt, Brute, DeWalt, Simpson, Hotsy, Landa, Mi-T-M, Pressure Pro, and Many More. For Hot Water & Cold Water Pressure Washers
10. JGB Enterprises Eagle Hose Eagleflex II 6000 Wrapped Blue Nitrile RMA Class B Pressure Washer Hose Assembly, 3/8" NPT Male X NPT Male Swivel with Guards, 6000 psi Maximum Pressure, 50′ Length, 3/8" Hose ID
By our suggestions above, we hope that you can found Hotsy Hot Water Pressure Washer for you.Please don’t forget to share your experience by comment in this post. Thank you!