Top 10 Honeywell Motion Pir Wired

Honeywell Intrusion CK IS3035 WIRED,35PIR,TAMPER,80LB PET IM

Heath Zenith motion activated decorative light, series: hz-4150, Charleston coach, 1 lights, 120 vac, 100 W, 60 hz, standard technology, 30 ft. sensing, 150 deg sensing, 5 sec test, 1 – 10 min auto timer, compact fluorescent, incandescent lamp, medium (E26) lamp base, White, wall mounting, 16-1/2 in overall length, 5-3/4 in overall width, 6-3/4 in overall depth, glass shade, clear shade, includes: mounting screws and wire connectors, standards: energy star certified, UL listed, for wet locations. The motion sensing lantern light comes on when motion is detected to make it appear as if you are home.

Honeywell IS3050 PIR Motion Detector, 50 foot

Curtain passive infrared detector works according to infrared spectrum. When people move in its detection range, the fresnel lens focus the infrared heat source on the sensor, and send the alarm signal via MCU’s comparison, analysis and calculation. This product is perfect connect with alarm control panel in home.

Specifications:
Working Voltage: DC9-16V
Working Current: ≤22mA(DC 12V)
Detecting Range: 10m
Detecting Angle: 15°
Sensitive Option: 1P/2P
Sensor Type: dual low noise PIR
Mounted Type: wall mounted
Installation Height: 2.2m
Operation Temperature: -10°C/+50°C(14°F-122°F)
Alarm Output: NC/NO optional(contact rating:60V DC, 300mA)

This product is a small curtain infrared detector with a beautiful and smooth appearance that can be ceiling mounted or wall mouted. It is suitable for balconies, windows, doors, corridors and other locations. The circuit is controlled by microprocessor and has the functions of sensitivity 1P, 2P adjustable, anti-radio interference, NC/NO optional and LED light on and off. It can respond quickly to human invasion and generate an alarm. Choosing the appropriate installation method can prevent pets.

Technical Parameters
Working Voltage: DC 12V
Working Current: ≤25mA
Working Temperature: -10°C/+50°C
Sensor Type: dual low noise pyroelectric infrared sensor
Preheat Time: 60s
Mount Method: wall mounted/ceiling mounted
Installation Height: 3.6 meters below
Detection Distance: 6 meters
Detection Angle: 15 degree
Tamper Switch: NC, no voltage output, contact capacity 28V DC, 100mA
Relay Output: NC/NO optional, contact capacity 28V DC, 80mA
Dimensions: 80*34.5*28mm

Walking Test
1. First please connect the cable according to the wiring diagram, then turn on the 12V DC power supply, the LED flashes, and the detector starts self-test for about 60 seconds.
2. After the self-test is completed (the LED stops flashing), please walk slowly through the coverage area. If the LED light is on, which indicates that the detector is in alarm state.
3. The LED jumper is to control whether the LED has an indication and it does not affect the normal operation of the detector.
4. Please refer to the installation and usage diagram and choose a different installation method.

A high performance, easy to install passive infrared sensor with a compact design