698 reviews analysed
1. Blackvue self-Adhesive windscreen Mount Tapes Compatible with Most of The Blackvue Dashcams (Set of 3 x Front Tapes)
Feature
- Blackvue self-adhesive silicone transparent windscreen mount tapes for dashcams.
- Set of 3 x FRONT camera tapes. Tapes are packed and sold in clear unbranded plastic bag.
- Each tape measurements are 4.9 x 2.6 cm. Please refer to the tapes sizes to detect if tapes fit your dashcam model mount size.
- Compatible with most of the BlackVue 2-channel dashcams windscreen mounts.
- IMPORTANT NOTE: the surface (windscreen, dashboard etc) should be cleaned off the dust, dirt, oil and other cleaners you might have used before) with alcohol-saturated liquid prior to applying this silicone self-adhesive tape.
Description
Blackvue self-adhesive windscreen mount tapes COMPATIBLE with most of the Blackvue dashcams mounts. Set of 3 x FRONT tapes. Tapes are packed and sold in a clear plastic bag. Each tape measurements are 4.9 x 2.6 cm. Compatible with most of the BlackVue 2-channel dashcams windscreen mounts. Please refer to the tapes sizes to detect if tapes fit your dashcam model mount size. IMPORTANT NOTE: the surface (windscreen, dashboard etc) should be cleaned off the dust, dirt, oil and other cleaners you might have used before) with alcohol-saturated liquid prior to applying this silicone self-adhesive tape.
2. Sticky Adhesive Replacement for Dashboard Pad Mounting Disk, VOLPORT 2pcs 3M Circle Heat Resistant Double Sided Tapes Strong VHB Sticker for Suction Cup Car Phone Holder Disc, GPS Windshield Dash Cam
Feature
- 【Designed for Suction items】Volport heat resistant 3M sticky adhesives for dashboard pad mounting base disk of suction cup phone mount. You can also adhere the adhesive to the suction cup directly. Applicable to most suction cup dashboard phone stand and other windshield long arm mount, GPS holder, tablet computer bracket, camera mount, ETC, iphone car mount, wireless charger base, dash camera mount holder, dashboard toys etc on the market. You can also cut it to the size you need.
- 【Genuine 3M Sticky Adhesive 】These phone dashboard car mount back stickers have high temperature(120℃+) resistance performance, even in Texas, you can use it without worry in hot Summer. Extra strong both side round 3M VHB circle dashboard cell phone grip replacement adhesion pads’s stickiness is 40% stronger than ordinary 2 side sticky glue. Easy to fix your car phone socket base, heavy duty dashboard mount base, you can stable and secure driving uber, truck, jeep, vehicle in bumpy roads.
- 【Easy to Install】The replacement kit comes with alcohol wipes to clean the surfaces before applying. Just peel off the old gel adhesive from mount and clean the the surface with alcohol wipe before using the new adhesive, after the surface is dried, peel off the 3m adhesive film to stick the dashboard pad mounting disc, or stick it to the bottom of the suction cup bracket directly and press down repeatedly for 5-10 minutes for better connecting to the surface, please wait 24 HOURS to use.
- 【Easy to Remove 】These flexible double sided car suction cup mount self adhesive is esay to remove, you can remove dash tray car mount stand without leaving clear adhesive residue, no tool required. Best car phone mount adhesive replacement. Make sure the surface of the chosen area and dashboard pad mounting disk of suction cup phone mount is cleaned completely before applying a new adhesive.
- 【Package includes】2 x 2.76 inch (70mm) round sticky adhesive, 4 x alcohol pads,1 x user manual. We provide a one-year warranty and if you need any help with our product, please do not hesitate to contact us and we will provide you our best after-sale service. All we want is your satisfaction.
3. MGQFY 4 PCS 80mm (3.15") Circular Double Side Sticker Dashboard Adhesive Replacement Compatible with Xiaoyi Camera/Car Mount/Windshield Pad Mounting Disk for Suction Cup Car Phone Holder Bracket GPS
Feature
- What you get:4 PCS Super Strong Double Side Sticker for Car Phone Mount Holder Bracket, GPS, Camera ,Wall holder, Dashboard Toys, Windshield,Tiles, Wall Pictures and more.
- Strong Adhesive Pads Compatible with xiaoyi camera ,Use widely:Double Sided Clear Acrylic Adhesive Disk Round Tough Sticky Tape Compatible with Mpow 033 car mount holder , Windshield Long Arm Car Phone Mount and other Car Phone Mount Holder Bracket ,GPS Camera ,Decorations, Dashboard Toys, Windshield,Tiles, Wall Pictures.Replacement Adhesive Kit for Long Arm Universal Magnetic Cradle Windshield Dashboard Cell Phone Mount Holder etc.
- CUT INTO ANY SIZE YOU NEED:You can cut pads into smaller pieces if need.
- Strong Adhesive and not leave a residue：Strong adhesive is strong yet leaves no residue when removal is required.
- These sticky pad can stick to lots of materials, such as wood, metals, glass, papers, and plastics and fabrics, etc.
Description
Package include:4 pieces Double Side Sticker Pad.
Double Side Sticker for Suction Cups for Car Bracket Mount Holder /GPS/Camera/Wall hook/and more
4. Garmin Mini Suction Cup Mount for Speak, Plus, Dash Cam 45, 55 and 65W, 010-12530-05
Description
Access your Compatible device while navigating in your vehicle with this portable Mini suction cup mount. Simply suction the mount to the windshield for easy viewing.
5. 3M Sticky Adhesive Replacement APPS2Car Dashboard VHB Sticker Pads for Magnetic Phone Car Mount,Car Phone Holder Parts,4 Pcs Double Sided VHB Mounting Pads Car Phone Mount Base Sticker Tapes
Feature
- ➣Strong Stickness: Original 3M VHB stick adhesive pads,Double sided self sticky,1.55mm thickness black VHB adhesive pads,stronger than most adhesive pads.
- ➣Suitable for stick many kinds of material with flat hard surface.It can be used in home bathroom mirror, refrigerator,bed post, wall, locker, office, driving personnel and other related equipment replace.
- ➣Rectangular 3M VHB sticky adhesive tape can be used on the bottom of the most dashboard 360 degrees Rotation magnetic car phone mount holder, which is stable even in bumpy roads.It is a strong sticky adhesive replacement for phone car mount.Compatible with Wizgear,Bextrix,Scosche ,Trainium ,PLDHPRO ,Ailun etc.magnetic phone car mount.
- ➣This 3M VHB adhesive pad is high temperature resistance and low temperature resistance,water-proof,Tear off non-trace.
- ➣NOTE:(1),Please don’t stick the 3M adhesive pad on very soft, rugged, texture,grease surface or leather surface.(2),Make sure the desired surface is clean and dry.(3),The 3M VHB adhesive pad is one-time use.(4),It is recommended to wait at least 24 hours ensure the sticker get the best stickiness before use.(5),WORRY-FREE:APPS2Car comes with best-in-class customer service,and lifetime warranty.Please contact us immediately if you have any problem.
Description
NOTE:
1,Please don’t stick the 3M stick adhesive pad on very soft, rugged, texture,grease surface or leather surface.
2,Please remove the residual glue and clean the surface.
3,The 3M VHB adhesive pad is one-time use.please sealed preservation.
4,It is Recommended to wait at least 24 hours after stuck before using.The longer the adhesive time, the stronger the viscosity will be.
5,Peel off the yellow protective film and press it at least 2 minutes then wait for about 2 hours before peel off the other side red film.If the red protective film is hard to peel off, please press it back once and try to peel off it again, don’t touch the gel with your hand after peel off.
Easy installation：
Step 1,Remove the residual glue.
Step 2,Clean&dry the car phone mount base completely.
Step 3,Tear off the yellow protective film.
Step 4,Stick it on the car phone mount base and press it at least 4 minutes for better connecting to the base,then wait for about 2 hours to tear off the other side red film.
Step 5,Clean and dry the smooth and hard flat surface thoroughly to ensure there is no dust or debris.
Step 6,Tear off the other side red protective film,Then stick it on the cleaned dash surface firmly and press it at least 5 minutes to ensure that the adhesive pad and the surface fully bond.It is recommended to wait for at least 24 hours before use.
If you hard to tear off the red protective film, please press it back ,then tear off it again.Don’t touch the gel with your hand after peel off the film.
Package include:
4 X 3M VHB adhesive pads
1 X use manual
6. APEMAN Dash Cam 1080P FHD DVR Car Driving Recorder 3" LCD Screen 170° Wide Angle, G-Sensor, WDR, Loop Recording, Night Vision, Motion Detection
Feature
- 【1080P FULL HD DASH CAM】Simultaneous recording with Super High Resolution 1080P FHD Lens, and 3” large LCD Screen deliver clearer videos&images and replay the key moment even when high speed driving.
- 【170° SUPER WIDE ANGLE】This car driving recorder employs 170° super wide angle lens. Ultra-wide field of view reduces the blind spots and captures more details, to reserve the real scene.
- 【BUILT IN G-SENSOR】With built-in G-sensor, apeman dashboard camera can automatically detect a sudden shake/collision and lock the footage to prevent the video from being overwritten even in loop recording. Accident scene can be truly restored.
- 【SUPER NIGHT VISION】The combination of F1.8 large aperture, WDR, HDR ensures the clarity of images at night. Eliminates the need for an auxiliary light source even in low-light environments, making it easy to obtain sharp, color-accurate images.
- 【EASY TO SET UP & USE】 Motion Detection, Seamless Loop Recording, Parking Monitor satisfy your need for daily driving. Simple installation and operation, no need to worry even for a first time user.
7. Wyze Cam Pan 1080p Pan/Tilt/Zoom Wi-Fi Indoor Smart Home Camera with Night Vision and 2-Way Audio, Works with Alexa
Feature
- NOTE: Works with 2.4GHz Wi-Fi networks (does not support 5GHz Wi-Fi)
- IFTTT Integration: Set up IFTTT applets to automate your Wyze Cam Pan.
- Works with Alexa: Ask Alexa to show your front door, kid’s room, or anywhere else you have your Wyze Cam Pan
- 110 Degree/sec rotation speed, 360 Degree horizontal range, 93 Degree vertical range for 360 Degree coverage in under 3 sec. Pan Scan feature automatically scans your room based on up to 4 waypoints
- 1080P full HD video and night vision that uses 6 IR LEDs and distinguishes 18 steps of gray to provide clear images up to 30 feet away. Works with 2.4GHz Wi-Fi networks (does not support 5GHz Wi-Fi)
- Motion &
- sound detection with alert notifications sent to your phone with free rolling 14-Day cloud storage of alert videos, 2-way audio, microSD card slot for continuous recording and time lapse.Connectivity Requirements:Upload speed 1.0 Mbps for SD and 1.5 Mbps for HD
- Motion tracking feature detects, Tags, and follows motion within the camera’s field of view, as long as motion continues
8. PITTASOFT 5 Pieces 5 x BLACKVUE Mount Double Side Tape Sticker DR650S / DR650GW / DR600GW / DR550GW / DR500GW
Description
Replacement Front mount double side tape for the Blackvue
9. Sticky Adhesive Pad Replacement for Car Dashboard Magnetic Phone Mount Base, pop-tech 8pcs 3M VHB Double Sided Sticker Heat Resistance Tapes Compatible with Suction Cup Cellphone Holder & Dash Cam
Feature
- 【Compatible with Various Kinds of Dashboard Magnetic Mounts】 For stickers adhesive tape, most people choose Pop-tech! Pop-tech’s adhesive tapes are made with 3M HVB original adhesive. When the base of your dashboard magnetic mount loses its stickiness, replacing the adhesive on the base of the holder is the best way. And our super sticky adhesive tape is your best choice!
- 【Adhesive size】 1.85″ * 0.87″, the thickness is 0.047″. Perfectly suitable for 95% of dashboard mounting bases. It can be pieced together or cut to replace the base sticker tape of driving recorder, PopWallet, GOPRO camera, suction cup stand! Pop-tech’s rectangular adhesive tape uses the most advanced adhesive synthesis technology, and its viscosity is 40% higher than ordinary adhesive tapes.
- 【Features】 Heat resistance: Pop-tech’s adhesive can resist high temperatures up to 120°! It can maintain the best viscosity under high temperature environment. Versatility: Stickers can be used on flat hard surfaces, such as home bathroom mirrors, refrigerators, bedposts, walls, lockers, offices, dashboards. Ease of use: tear off without trace!
- 【Note】 (1) Please do not stick the 3M adhesive pad on the very soft, rough, textured, oily surface or leather surface. (2) Please ensure that the required surface is clean and dry. (3) The 3M VHB rubber pad is for one-time use. (4) It is recommended to wait at least 24 hours to ensure that the sticker has the best adhesion before use. (5) Do not touch the adhesive with your hands
- 【Warranty】 Pop-tech products provide 12 months worry-free after-sales warranty service (extended from 12 months to lifetime if you contact customer service with any problem ). The package contains : 8 pcs Universal adhesives and 8 pack Universal alcohol pads for cleaning.
Conclusion
By our suggestions above, we hope that you can found Dash Camera Mount Sticker for you.Please don’t forget to share your experience by comment in this post. Thank you!
