The Best Ao Smith Tankless Water Heater Ath3dvn Warranty

Product Description

Our high-efficiency plus RL models, offer Rinnai’s most advanced technology in non-condensing tankless water heaters. You’ll enjoy the endless hot water and energy savings you expect, with the addition of Wi-Fi monitoring and recirculation technology for faster hot water delivery.

From the Manufacturer

The R94LSi lets you enjoy continuous hot water for up to five plumbing and appliance outlets simultaneously and always at a consistent, pre-set temperature. With a capacity of up to 9.4 gallons of hot water per minute (GPM), the R94LSi still delivers up to 40% energy savings and significant space savings. This compact, interior-mount unit vents directly to the outside with a concentric venting system.

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.

NOTE : 11Kw at 220 is equal to 13kw at 240.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

Product Description

Configured for cold climates or high flow rates. Well suited where incoming water temperature can drop below 45 F. For use in more demanding water usage applications. Self modulating flow sensor technology regulates the amount of energy required to heat the water needed. Digital temperature display showing the outlet water temperature setting. Uses (3) 9 KW standard Emerson electric heating elements with brass tops to prevent electrolysis. Copper heat exchanger. Automatic resettable thermostat. (3) 40 DP breakers required. 112A draw. Required wire: 3 sets 8 AWG. Pipe fitting: 3/4” NPT. Energy efficiency: 99.8%. UL and CSA certified.Weight: 11 lb. Lifetime warranty.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature can reach as low as 37 degrees. The ECO 27 is capable of heating nearly 3 gallons per minute at this temperature. The ECO 27 is the largest electric tankless water heater available with Patented Self Modulating Technology. This model is well-suited for homes in the northern U.S., Canada, and in the southern U.S. for large Roman-style or Jacuzzi tubs that generally have more demanding water usage needs. Digital temperature control allows you to set your temperature in increments of 1 degree. Prior to purchase and installation please verify that this model is the right size for your hot water needs and electrical requirements.

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for one bathroom residences in climates where incoming water temperature is 67°F and above. This model is well suited for heating nearly 1.5 gallons per minute to 105°F at that inlet temperature, which is the equivalent of one water saver shower head. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 8 requires a minimum 100 amp electrical panel for installation with (1) 40 amp double pole breaker connected to (1) set of #8 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

SAVE ENERGY, WATER, MONEY, TIME – Atmor offers the efficient and convenient water heating solution you have been looking for. Atmor 3kW/ 110V Point-of-Use Tankless Electric Instant Water Heater provides an unlimited flow of hot water without the wait or worry of ever running out. That’s right, instant hot water on demand! This unit is specifically designed for hand washing SINGLE SINKS in areas with at least 57°F ground water temps (See Sizing Guide). Please note that this unit will not operate properly in Northern regions with inlet water temps colder than 57 degrees. A flow rate of 0.5 gallon per minute (GPM) is required in order to achieve a 45° temperature rise. Perfect for residential and commercial use, this compact unit can be installed against the wall either under the sink out of sight or near the point of use. Unit requires a 30 Amp dedicated single-phase breaker. This is NOT a plug in unit. Required wire size: 10 AWG. Standard 1/2″ NPT (straight thread) fittings. Maximum flow rate is 0.5 GPM. Maximum temperature rise possible for unit is 45°F. For safety reasons, the included Pressure Relief Device (PRD) included must be installed on your water heater per the instructions in the owner’s manual. In order to achieve maximum performance, it is recommended to install the included 0.5 GPM sink aerator. Failure to comply with the installation and operating instructions in our Owners Manual or improper use will void the warranty. The water heater must be installed by a licensed electrician in compliance with all local and building regulations.

MAREY GA10LP Indoor Propane Gas Tankless Water Heater can provide up to 2. 7 Gal. per minute for a perfect shower at 115°F output water temperature. It is also called water heater on demand, because it heats water only when needed, saving energy. It is designed in the USA and it’s perfect to supply endless hot water for up to 2 or 3 points of use simultaneously (for a variety of residential hot-water applications). Its compact design saves space and is easy to install: you will only need 2-D cell battery for the ignition and a venting (not included in the box). MAREY has been on the water heating business since 1955, bringing tradition and innovation together.

Product Description

Chronomite was the first to patent a microprocessor technology which allows for a pre-set or controlled output temperature that delivers unlimited hot water without risk of scalding-in two seconds as opposed to the six seconds offered by other tankless water heaters. Chronomite is installed at point of use and is only operational when hot water is requested, thus dramatically reducing hot water delivery time and inefficient use of electricity.

From the Manufacturer

Chronomite was the first to patent a microprocessor technology which allows for a pre-set or controlled output temperature that delivers unlimited hot water without risk of scalding-in two seconds as opposed to the six seconds offered by other tankless water heaters. Chronomite is installed at point of use and is only operational when hot water is requested, thus dramatically reducing hot water delivery time and inefficient use of electricity.

Product Description

Chronomite was the first to patent a microprocessor technology which allows for a pre-set or controlled output temperature that delivers unlimited hot water without risk of scalding-in two seconds as opposed to the six seconds offered by other tankless water heaters. Chronomite is installed at point of use and is only operational when hot water is requested, thus dramatically reducing hot water delivery time and inefficient use of electricity.

From the Manufacturer

Chronomite was the first to patent a microprocessor technology which allows for a pre-set or controlled output temperature that delivers unlimited hot water without risk of scalding-in two seconds as opposed to the six seconds offered by other tankless water heaters. Chronomite is installed at point of use and is only operational when hot water is requested, thus dramatically reducing hot water delivery time and inefficient use of electricity.

SAVE ENERGY, WATER, MONEY, TIME – Atmor offers the efficient and convenient water heating solution you have been looking for. Atmor 13kW/ 240V Point-of-Use Tank less Electric Instant Water Heater provides an unlimited flow of hot water without the wait or worry of ever running out. That’s right, instant hot water on demand! Rest your mind at ease and enjoy the continuous flow of hot water whenever you want. This unit is specifically designed for a full bathroom (a water saver shower head required for optimal performance). Perfect for residential and commercial use, this compact unit can be installed against the wall either under the sink out of sight or near the point of use. Unit requires a 60 Amp dedicated single-phase, double pole breaker. Required wire size: 4 AWG. Standard 1/2″ NPT (straight thread) fittings. For safety reasons, the included Pressure Relief Device (PRD) included must be installed on your water heater per the instructions in the owner’s manual. Failure to comply with the installation and operating instructions in our Owners Manual or improper use will void the . The water heater must be installed by a licensed electrician in compliance with all local and building regulations.