Top 10 Ao Smith 80 Gallon Hot Water Tank Does Not Have Enough Hot Water

Product Description

Factory pre-charge: 38 psi (pounds per square inch). maximum working pressure 100 psi. Maximum operating temperature 200 F (Degree Fahrenheit). engineered to provide years of trouble-free service using cold rolled steel for a higher strength to weight ratio. Rugged, stable steel base with protective plastic strip. Heavy-duty butyl rubber diaphragm and durable polyolefin liner to prevent corrosion. Water worker tanks feature an appliance quality finish which is resistant to sunlight and harsh conditions. All tanks are completely lead free for safety. Meets nsf (National Sanitation foundation) standard 61 for clean, safe drinking water. 5 year warranty. Blue tank.

From the Manufacturer

The WaterWorker pre-charged tanks utilize a butyl composite diaphragm, which flexes up and down based on water level and air pressure, as the pump fills the tank with water the air above the diaphragm is compressed, increasing the pressure in the tank until the pump cut-off pressure is reached. When water is drawn from the tank, the pressure inside the tank decreases until the pressure switch starts the pump. The amount of usable water for every pump cycles is called drawdown. The greater drawn-down capacity you select, the less your pump cycles saving energy, money, and extending your pump life. Advantages over galvanized well tanks: Pre-charged tanks do not have water-logging problems like the galvanized tanks. The air and water are totally separated using a diaphragm. No external air controls needed. Pre-charged tanks have a much larger draw-down for the same physical size. Larger draw down reduces pump cycles and pump wear, i.e. at 30/50 PSIG range three times the draw-down for pre-charged tanks of the same physical size. Pre-charged Tanks completely empty during each pump cycle. Pre-charged Tanks are much smaller and easier to handle that galvanized well tanks. Pre-charged tanks with a 30/50 Pressure Switch would be one-third the size of a galvanized tank with the same drawdown. Deep Well Jet Pumps could use either a vertical tank or a horizontal tank, depending on space requirements and sizing. Submersible Pump applications would usually use vertical tanks, again based on proper sizing. Shallow Well Jet Pumps could use vertical or horizontal tanks, based on proper sizing. The rule of thumb in sizing is to count the number of fixtures in the home, i.e. sinks, showers, toilets, dishwasher, faucets, washing machines, outside faucets, etc. and multiply it by 3. Example: a house with 11 fixtures x 3 would be 33-Gallon tank. We would suggest our 44-Gallon tank, which is the next larger sized tank.This is a Hazmat non-returnable item

Instant Hot Water Tank HWT-00 for use with InSinkErator instant hot water dispensers (excluding model Hot1 and Hot100) – water dispenser and filtration sold separately. Welcome to the heart of your instant hot water system. Although the tank lies hidden below your sink, its contributions to instant convenience can’t be overlooked. The InSinkErator instant hot water tank always has near-boiling water ready when you need it. Tank uses less energy than a 40-watt light bulb and has an easy-to-adjust temperature control. Stainless steel tank dispenses near-boiling 200-degree Fahrenheit water instantly. Features; 2/3-gallon stainless steel tank that dispenses 60-cups of 200 ̊F water per hour, 115 volts, A.C., 750 watts, 6.5 amp heating element with grounded three (3) prong plug, Snap-action thermostat, adjustable from 160 ̊F to 210 ̊F (factory pre-set at 200 ̊F), recommended supply pressure is 30-125 psi.

Electric Hot Water Dispenser with Auto Feed Hot Water Boiler and Warmer 4.0 Liter, Stainless Steel / Black RHAP-16002

Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 2.5-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room.

120V – requires hard wiring. 1440W element. Magnesium anode rod. Rectangular shape with 2″ of foam insulation. Glass lined tank for longer life. 6 year warranty on heater and 1 year warranty on parts for both commercial and residential use. Temperature/pressure relief valve included. Can be mounted both horizontally or vertically. Mounts on floor or wall. Meets ASHRAE 90.1. See Info Page for technical and installation specifications.

Product description

AH-780-UL Features: -Water dispenser.-Hot water dispenser for instant coffee, soup, oatmeal, hot chocolate and tea.-Instantly delivers up to 60 cups per hour of steaming hot water.-5/8 gallon stainless steel tank with removable drain plug built to last.-Patented displacement system increases service life by helping to prevent mineral buildup.-Fingertip adjustable thermostat – 140° to 190°.-Heater protection control with patented self-resetting thermal fuse to prevent dry start.-Tank is not under pressure; self-contained expansion chamber prevents dripping and leaks.-Uses less electricity than a 40-watt light bulb, costing less than $2.00 per month to operate.-Compatible with Cool Water and Clear Water both sold separately.-Use with "Open Vent" faucets available in single (hot only) or dual (hot & cold) (sold separately). Specifications: -780 watt heating element allows for faster recovery time. Dimensions: -Overall Dimensions: 11.20" H x 8.10"W x 6.80" D. Warranty: -Package Contents: hot water dispenser, tank mounting bracket, quick-connect fitting, power cord, manual, warranty.

From the Manufacturer

Waste King’s Quick and Hot kitchen Hot Water Tank provide you with 190-degree hot water at your fingertips – anytime! The Quick and Hot is compact, energy efficient, safe, easy to install and has a 60 cup per hour capacity. Faucet is not included. A great addition to any kitchen!

American standard water heaters point-of-use electric models are the ideal solution for hot water requirements in locations where in it is not practical to run long hot water pipes. These models can be installed in spaces under cabinets, counters, mop sinks or in other confined areas. Residential applications come with a 6 year limited tank and parts warranty. Commercial applications come with a 3 year limited warranty on the tank, and a 1 year parts warranty.