The Best Water Worker Vs Ao Smith Water Tank

“Features:

Stainless steel 1/4″” NPT valve thread connection to connect to RO systems and other water producing applications. Smooth internal air vent cap prevents diaphragm damages. High-grade butyl diaphragm and post-cure procedures ensure a safe, tasteless and odorless water chamber. Discharges effectively in a vertical or horizontal position. Tested by independent third-party to meet NSF/ANSI Standard. IAMPO approved. CE Mark approved

Specifications & Dimensions:

Height: 14″”
Diameter: 11″”
Tank size: 3.2 gallons
Shipping weight: 9 LBS

Tank ball valve included.”

The electronic gas control valve incorporates an LED status indicator that monitors system operation and service diagnostics. Gas control located within hot water heater uses a thermopile to generate the power needed to operate the electronic gas control without requiring an external power source. This product has been certified by a third party to be compliant with the “Safe Drinking Water Act” requirements for low lead in potable (human consumption – drinking and cooking) and non-potable water applications (non-human consumption). Thermostat is compatible with all A.O. Smith branded heaters including A.O. Smith, State Water Heaters, American Water Heater, and Reliance.

Product Description

Factory pre-charge: 38 psi (pounds per square inch). maximum working pressure 100 psi. Maximum operating temperature 200 F (Degree Fahrenheit). engineered to provide years of trouble-free service using cold rolled steel for a higher strength to weight ratio. Rugged, stable steel base with protective plastic strip. Heavy-duty butyl rubber diaphragm and durable polyolefin liner to prevent corrosion. Water worker tanks feature an appliance quality finish which is resistant to sunlight and harsh conditions. All tanks are completely lead free for safety. Meets nsf (National Sanitation foundation) standard 61 for clean, safe drinking water. 5 year warranty. Blue tank.

From the Manufacturer

The WaterWorker pre-charged tanks utilize a butyl composite diaphragm, which flexes up and down based on water level and air pressure, as the pump fills the tank with water the air above the diaphragm is compressed, increasing the pressure in the tank until the pump cut-off pressure is reached. When water is drawn from the tank, the pressure inside the tank decreases until the pressure switch starts the pump. The amount of usable water for every pump cycles is called drawdown. The greater drawn-down capacity you select, the less your pump cycles saving energy, money, and extending your pump life. Advantages over galvanized well tanks: Pre-charged tanks do not have water-logging problems like the galvanized tanks. The air and water are totally separated using a diaphragm. No external air controls needed. Pre-charged tanks have a much larger draw-down for the same physical size. Larger draw down reduces pump cycles and pump wear, i.e. at 30/50 PSIG range three times the draw-down for pre-charged tanks of the same physical size. Pre-charged Tanks completely empty during each pump cycle. Pre-charged Tanks are much smaller and easier to handle that galvanized well tanks. Pre-charged tanks with a 30/50 Pressure Switch would be one-third the size of a galvanized tank with the same drawdown. Deep Well Jet Pumps could use either a vertical tank or a horizontal tank, depending on space requirements and sizing. Submersible Pump applications would usually use vertical tanks, again based on proper sizing. Shallow Well Jet Pumps could use vertical or horizontal tanks, based on proper sizing. The rule of thumb in sizing is to count the number of fixtures in the home, i.e. sinks, showers, toilets, dishwasher, faucets, washing machines, outside faucets, etc. and multiply it by 3. Example: a house with 11 fixtures x 3 would be 33-Gallon tank. We would suggest our 44-Gallon tank, which is the next larger sized tank.This is a Hazmat non-returnable item

Barker Manufacturing Company Water Tank Kit – Tanks made of high impact plastic material. All inlets are of hose, barbed design and no threads to strip. Non-toxic, food grade polyethylene construction. Tasteless, odorless, rust proof and corrosion proof.

Product Description

At air valve, check tank air pressure with tire gauge. If needed, adjust tank pressure up or down

BODY CONSTRUCTION: Heavy Gauge Steel
BODY FINISH: Electrostatically Applied Baked-On Polyester
TANK PRECHARGE: 40 psi Nitrogen-Rich Charge
TANK CAPACITY: 35 gal
EQUIVALENCY RATING: 82 gal
DRAWEOWN WITH 20/40 SWITCH: 12.7 gal
DRAWDOWN WITH 30/50 SWITCH: 10.7 gal
DRAWDOWN WITH 40/60 SWITCH: 9.3 gal
BLADDER / WATER CELL: One Piece Seamless PVC
TANK DIAMETER: 20″
TANK HEIGHT: 36-1/4″
FLANGE: Glass-Filled Polypropylene
PIPE TAP SIZE: 1″ NPT
DISTANCE FLOOR TO TAP CENTER: 2″
MAXIMUM PRESSURE RATING: 100 PSI

From the Manufacturer

Vertical Pre-Charged pressure tank. This tank holds 35-Gallons but is equal to an 82-Gallon standard tank in performance.

NSF CERTIFIED MATERIAL & NSF LOGO Molded into tank All parts of tank made with NSF International NSF/ANSI Std 61 approved Medium Density Polyethylene (MDPE) Resin with UV-8 stabilization FRESH/DRINKING WATER SAFE Other tank brands without NSF logo will not pass a health inspection, tanks made without the correct materials may be hazardous to your health BPA FREE Class A Customs does not carry this chemical nor uses it in the manufacturing process FRESH or GRAY TANK use SEAMLESS One piece construction, no seams to burst RESISTANT Stain, Corrosion and Rust Resistant COLOR Creamy White you can see waterline through tank OEM PART No retail box – no install instruction Have a certified technician install all parts to prevent product damage and personal injury PREPARATION Sanitize each tank prior to use to remove any debris from the manufacturing process Tanks are made in a warehouse, wipe with a damp cloth to remove surface dust or scuffs TANK MUST BE VENTED allowing air in and out when in use DO NOT PRESSURIZE TANK DO NOT HOOK GARDEN HOSE DIRECTLY TO TANK DAMAGE WILL OCCUR DO NOT over-tighten fittings damage will occur MOUNTING & BRACING Place tank on level surface and brace to prevent tank from moving during transit DO NOT hang tank by straps DO NOT place weight on tank WARRANTY Cutting or modifying the tank in any way voids any/all warranty Using tank for any purpose other than fresh/gray water storage voids any/all warranty FOOD VENDORS You must verify requirements with health department where inspection will be made BEFORE PURCHASING Verify Requirements on Fresh Water Tank, Gray Water Tank, fittings, drainage, and mounting placement.

Product Description

This pre-pressurized white storage tank has a 1/4 inch MPT and an approximate 10 gallon storage capacity. The tank is used for storing reverse osmosis water and has been NSF tested and certified against ANSI/ NSF Standard 58 for material and structural integrity requirements. The inside of the tank has a polypropylene liner and utilizes a butyl diaphragm for the water storage area.

From the Manufacturer

This pre-pressurized blue storage tank has 1/4-Inch MPT fittings and an approximate storage capacity of 10 gallons . The tank is used for storing reverse osmosis water and is NSF tested and certified against ANSI/ NSF Standard 61. The inside of the tank has a polypropylene liner and utilizes a butyl diaphragm for the water storage area. Perfect for home applications for higher water volume is needed or for commercial applications.