Top 10 Water Tank 41 Gallons Ao Smith

Product description

Part Number WR17X11440 replaces 1091942, AH783769, EA783769, PS783769.

GE Factory Part. GE brands include General Electric, Hotpoint, RCA, and others. GE also makes various appliance models for Sears / Kenmore.

From the Manufacturer

Water Tank Dispenser Assembly. This part works with the following models: General Electric CSHS5UGXSS, General Electric CSS25USWASS, General Electric CSS25USWCSS, General Electric CSS25USWSS, General Electric ESS25LGPABB.

Barker Manufacturing Company Water Tank Kit – Tanks made of high impact plastic material. All inlets are of hose, barbed design and no threads to strip. Non-toxic, food grade polyethylene construction. Tasteless, odorless, rust proof and corrosion proof.

Product Description

At air valve, check tank air pressure with tire gauge. If needed, adjust tank pressure up or down

BODY CONSTRUCTION: Heavy Gauge Steel
BODY FINISH: Electrostatically Applied Baked-On Polyester
TANK PRECHARGE: 40 psi Nitrogen-Rich Charge
TANK CAPACITY: 35 gal
EQUIVALENCY RATING: 82 gal
DRAWEOWN WITH 20/40 SWITCH: 12.7 gal
DRAWDOWN WITH 30/50 SWITCH: 10.7 gal
DRAWDOWN WITH 40/60 SWITCH: 9.3 gal
BLADDER / WATER CELL: One Piece Seamless PVC
TANK DIAMETER: 20″
TANK HEIGHT: 36-1/4″
FLANGE: Glass-Filled Polypropylene
PIPE TAP SIZE: 1″ NPT
DISTANCE FLOOR TO TAP CENTER: 2″
MAXIMUM PRESSURE RATING: 100 PSI

From the Manufacturer

Vertical Pre-Charged pressure tank. This tank holds 35-Gallons but is equal to an 82-Gallon standard tank in performance.

Barker Manufacturing Company Water Tank Kit – Tanks made of high impact plastic material. All inlets are of hose, barbed design and no threads to strip. Non-toxic, food grade polyethylene construction. Tasteless, odorless, rust proof and corrosion proof.

: Reverse Osmosis Pressurized Water Storage Tank 4.4 Gallon PA-E RO-132 + Valve

Storage tank: 3.2 gallon (Storage capacity @ 60 PSI system pressure) Tank total volume 4.4 Gallon @ 100PSI Direct Feed. CE &amp NSF Certified durable 3.2 Gallon Holding tank with Stainless Steel connection system This RO Tank has been tested &amp certified by NSF international under NSF/ANSI standard 58 for material and structural integrity requirements Additional Information
• you can add a tank to your RO DI system and it takes about 1 to 1-1/2 hours to fill up the tank completely for Drinking:
• When your tank is flat and start losing the holding capacity and not able to be recharged anymore.
• Add additional tank to double the amount of holding water.
• Connect close to an ice maker or a refrigerator for better pressure.Features &amp Specification:
  • Model # RO-132 From PA-E Machinery Co. Ltd.
  • 100 PSI Max Working Pressure.
  • Tank are Pre-Charged at 6 PSI.
  • 1/4 inch stainless Steel Connection built for Reverse Osmosis water storage tank, pump tank &amp thermal tank applications.
  • Brass Cap with internal O-Ring guarantees No Air from air vent.
  • Sealed system eliminates bacteria growth
  • Smooth internal air vent cap prevents diaphragm damaged.
  • Dimension: 14 inch Height , 11 inch Diameter Package includes:
    • Pressure tank with Tank stand
    • Plastic tank ball valve with Blue Handle, connects to 1/4 inch tubing (compression type)

      Exported By ExportYourStore

NSF CERTIFIED MATERIAL & NSF LOGO Molded into tank All parts of tank made with NSF International NSF/ANSI Std 61 approved Medium Density Polyethylene (MDPE) Resin with UV-8 stabilization FRESH/DRINKING WATER SAFE Other tank brands without NSF logo will not pass a health inspection, tanks made without the correct materials may be hazardous to your health BPA FREE Class A Customs does not carry this chemical nor uses it in the manufacturing process FRESH or GRAY TANK use SEAMLESS One piece construction, no seams to burst RESISTANT Stain, Corrosion and Rust Resistant COLOR Creamy White you can see waterline through tank OEM PART No retail box – no install instruction Have a certified technician install all parts to prevent product damage and personal injury PREPARATION Sanitize each tank prior to use to remove any debris from the manufacturing process Tanks are made in a warehouse, wipe with a damp cloth to remove surface dust or scuffs TANK MUST BE VENTED allowing air in and out when in use DO NOT PRESSURIZE TANK DO NOT HOOK GARDEN HOSE DIRECTLY TO TANK DAMAGE WILL OCCUR DO NOT over-tighten fittings damage will occur MOUNTING & BRACING Place tank on level surface and brace to prevent tank from moving during transit DO NOT hang tank by straps DO NOT place weight on tank WARRANTY Cutting or modifying the tank in any way voids any/all warranty Using tank for any purpose other than fresh/gray water storage voids any/all warranty FOOD VENDORS You must verify requirements with health department where inspection will be made BEFORE PURCHASING Verify Requirements on Fresh Water Tank, Gray Water Tank, fittings, drainage, and mounting placement.

NSF CERTIFIED MATERIAL & NSF LOGO Molded into tank All parts of tank made with NSF International NSF/ANSI Std 61 approved Medium Density Polyethylene (MDPE) Resin with UV-8 stabilization. FRESH/DRINKING WATER SAFE Other tank brands without NSF logo will not pass a health inspection, tanks made without the correct materials may be hazardous to your health BPA FREE Class A Customs does not carry this chemical nor uses it in the manufacturing process. FRESH or GRAY TANK use. SEAMLESS one piece construction, no seams to burst. RESISTANT to Stain, Corrosion and Rust Resistant. COLOR Creamy White you can see waterline through tank. OEM PART – No retail box – no install instruction. Have a certified technician install all parts to prevent product damage and personal injury. PREPARATION – Sanitize each tank prior to use to remove any debris from the manufacturing process. Tanks are made in a warehouse, wipe with a damp cloth to remove surface dust or scuffs. TANK MUST BE VENTED allowing air in and out when in use. **DO NOT PRESSURIZE TANK** DO NOT HOOK GARDEN HOSE DIRECTLY TO TANK **DAMAGE WILL OCCUR** DO NOT over-tighten fittings damage will occur. MOUNTING & BRACING – Place tank on level surface and brace to prevent tank from moving during transit. DO NOT hang tank by straps. DO NOT place weight on tank. WARRANTY – Cutting or modifying the tank in any way voids any/all warranty Using tank for any purpose other than fresh/gray water storage voids any/all warranty FOOD VENDORS You must verify requirements with health department where inspection will be made. BEFORE PURCHASING – Verify Requirements on Fresh Water Tank, Gray Water Tank, fittings, drainage, and mounting placement.

Note: The color of the item may vary slightly due to photography and your own computer
Feature:
This valve is the replacement of the traditional float ballcock, which can be applied to
various systems of high water tanks, pools, water towers of the industry and civil construction, etc.
Its working principle:
When the pool or tank water levels fall, the valve body will sink down and then the forerunner of the control valve will be opened.
As the pipe water pressure affects, the seal face of control valve will be opened.
Finally the water comes out and vice versa
Applies to: water tower tank, solar, toilet, aquarists, agricultural irrigation, food machinery, humidifiers, heaters, livestock drinking and swimming pool water control.
Specification:
Material: ABS Plastic
Color: Cream
Type: 3/4″ inlet
Connection: Male thread
Structure: floating ball
Nominal Diameter: 20 (mm)
Suitable medium: water
Pressure environment: atmospheric
Working temperature: high temperature
Flow direction: one-way
Drive: hydraulic control
Both sides of the diameter: 2.4cm
Size: 10.2×5.8×8.6cm/4.02 x 2.28 x 2.39″(L x W x T)
Weight:172g

Package Include:
1 x 3/4″ Automatic Water Level Control Valve Floating Ball Valve
1 x Filter

:
Reverse Osmosis Pressurized Water Storage Tank 4.4 Gallon PA-E RO-132 + Valve
Storage tank: 3.2 gallon (Storage capacity @ 60 PSI system pressure) Tank total volume 4.4 Gallon @ 100PSI Direct Feed.
CE & NSF Certified durable 3.2 Gallon Holding tank with Stainless Steel connection system
This RO Tank has been tested & certified by NSF international under NSF/ANSI standard 58 for material and structural integrity requirements
Additional Information

Features & Specification:

Package includes:

Exported By ExportYourStore

Ameri-Kart – Polyethylene Water Tank – without fittings. Use polyethylene flex tank fittings (not included); 63 Gallons; Length (Inch) 46.5; Width (Inch) 16; Height (Inch) 20.75.