Top 10 Turn A Refrigerator Into A Kegerator

This Standard Kegerator Conversion Kit from Kegco gives any do-it-yourself beer lover the tools they need to turn their refrigerator or freezer into a high quality draft beer dispenser. Thanks to a commercial grade dual gauge regulator that allows you to monitor both CO2 pressure in your keg and CO2 volume in your tank, and a lever handle keg coupler that is more durable and long-lasting than a wing handle coupler, you can confidently build your own kegerator with all the exciting features of a professional dispense system. Kegco is with you every step of the way, with detailed instructions included in every kit.

The Johnson Control’s A421 digital temperature controller is great for the brewers kegerator or keezer. You can use this to keep your beer or wine at exactly the temperature you like it. Excellent for fermenting lagers as well. The A421 Series controls are single stage, electronic temperature controls with a single-pole, double-throw (SPDT) output relay. The controls feature an adjustable backlit LCD for viewing the temperature and status of other functions, and a three-button touchpad for setup and adjustment. An LED indicates the On/Off status of the output relay. The A421 control is 120 VAC. The A421 controls provide heating or cooling control, sensor offset, temperature setback, adjustable anti-short cycle delay, and a restricted user adjustment mode. The temperature units can be displayed in °F or °C. The temperature adjustment range is -40 to 212°F or -40 to 100°C. The A421 automatically changes from heating and cooling.

Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year

Package Included:
1x ITC-308 Temperature Controller
1x Manual

This mini dehumidifier has been design to adsorb moisture from small enclosed areas (maximum area: 10’x 10′). It will help protect clothes and valuables from the damaging effects of mold/mildew and moisture rot. It is 100% renewable and needs no power to operate. Just hang the eva-dry unit in a closet, or you can place it in other small enclosed spaces, and it will start to adsorb moisture. There are no batteries required or cords to plug in, the unit works without power. There is an indicator window with special “moisture meter crystals” that change from orange (when dry) to green (when wet) to indicate when the unit needs to be “renewed”. The unit will adsorb approximately 8 to 10 ounces of moisture (depending on humidity levels this should take between 3 – 8 weeks). Once the moisture has been adsorbed it cannot leak or spill. This unit uses a specialized engineered crystallized silica gel that is odorless, non-toxic and completely safe. When the indicator crystals turn Green it is time to “re-new” the unit. Simply remove the unit from where it is adsorbing moisture and plug it into a power outlet.

Controller turns off your lights if high temperature exceeds set point. Built in 1 – 30 minute ‘hot start’ delay with ‘HOLD’ feature. 6 foot temperature probe is accurate to within 2Degree F. Protects your garden & keeps your plants safe. Plastic enclosure protects internal components from dust and moisture. 15 Amps/120 Volts/60 Hz. 3 year warranty.

*UNIT IS EQUIPPED WITH TWO SWITCHES – A SWITCH ON THE POWER CORD, FOR THOSE WHO PREFER NOT TO OPEN THE KEGERATOR DOOR WHEN TURNING THE TOWER COOLER ON AND OFF, AND A ROCKER SWITCH ON THE TOWER COOLER ITSELF, FOR THOSE WHOSE OUTLETS ARE BEHIND THE KEGERATOR, MAKING IT DIFFICULT TO TURN THE TOWER COOLER ON AND OFF FROM THE POWER CORD. Coldtower Kegerator Tower Coolers are professionally designed tower coolers. Our Super Tower Cooler utilizes a powerful ball bearing 34 CFM blower, rated for 50,000 hours of operation, 1/2″ air hose, blower box air diffusers, and an on/off switch on the 10 foot long power cord. The 34 CFM blower and 1/2″ air hose provide unmatched cooling capabilities. The air diffusers keep blower noise to a minimum, while also maintaining a more uniform temperature throughout the kegerator and helping to prevent the common problems of ice buildup on the cooling plate, frozen beer lines, and slushy beer when the keg gets low. Use the power switch to turn the already long life 50,000 hour blower off when not drinking beer, and your Coldtower will easily outlast your kegerator! We spent a lot of time and money researching and developing our tower coolers to give you the best possible product. Economy tower coolers cannot compare! For the coldest beer possible and the perfect amount of head, harness the power of Coldtower! *See pictures and bullet points for more details.

Bunn 39912. 0002 Relay, Comp Gd40Me Beg K115 120V. Genuine OEM replacement part. Bunn offers profitable, reliable beverage equipment and outstanding post-purchase support wherever customers are served. Use genuine OEM parts for safety reliability and performance.