The 10 Best Oven Door Seals Brisbane

Surface mounted hand dryer shall have either 18-gauge, type-304 stainless steel with #4 satin-finish vertical grain (B-7128) or 22-gauge mild steel zinc plated with high-gloss white epoxy paint finish (B-7120) covers with UL 94-5VA black plastic trim. Slim profile cover shall project no more than 4″ (100mm) from the finished face of wall to comply with barrier-free accessibility guidelines (including ADAAG in the USA). Unit shall be equipped with uniquely designed (patent pending) dual air outlets that provide a swirling circulation of airflow for (less then 25 seconds) hand dry. Motor shall be 1/7 hp, universal type on resilient mounting with sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end; equipped with automatic thermal-overload switch. Heating elements shall be located on outlet side of fan, shall heat air without hot spots, be inaccessible to vandals, and protected by an automatic thermal-overload switch. Electronic sensor shall automatically turn dryer on when hands are held under air-outlet opening and across path of sensor. Dryer shall turn off automatically when hands are removed. Sensor shall automatically shut dryer off approximately 1-1/2 minutes after dryer turns on if an inanimate object is placed across air-outlet opening. After inanimate object is removed, electronic sensor shall automatically reset itself and dryer shall operate normally. Unit shall be cULus Listed, and/or VDE approved, CE marked. Unit shall comply with EU Directive “Restriction of Hazardous Substance” (RoHS) requirements for non-use of certain hazardous substances in the production of electronic products. Unit shall be protected by a limited 10 -year warranty on all parts except motor brushes. Motor brushes shall be warranted for three years from date of purchase. Mounting base: 20-gauge (1.5mm) plated steel with four 0.236″ (6mm) diameter mounting holes.

Corrosion-resistant valve dispenses commercially marketed all-purpose hand and liquid soaps, lotions, E4-Rated antibacterial soaps. Concealed wall fastening; hinged filler top requires special key to open. Valve operates with less than 5 lb of force (22.2 N). Measures 3-5/16″ Depth by 6-1/8″ height.

Satin-finish stainless steel unit with stainless steel dispensing mechanism. Flush tumbler lock. Holds two rolls up to 5-1/4″diameter (1800 sheets). Extra roll automatically drops in place when bottom roll is depleted. Theft-resistant, heavy-duty spindles. Material: Cabinet-18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces have satin-finish. Radius on top corners of cabinet match corners and edges of door. Door-18-8 S, type-304, 22-gauge (0.8mm) stainless steel with 18-gauge (1.2mm) stainless steel door frame. Exposed surfaces have satin-finish. Front of door is drawn, one-piece, seamless construction and has same degree of arc as other Bobrick ConturaSeries washroom accessories. Radius on corners and edges of door match top corners of cabinet and other ConturaSeries accessories; Secured to cabinet with two rivets. Equipped with a flush tumbler lock keyed like other Bobrick washroom accessories; Dispensing Mechanism, Inner Housing and Cam-18-8 S, type-304, 18-gauge (1.2mm) stainless steel; Spindles (2)-Heavy-duty, one-piece, molded ABS. Theft-resistant. Retained in dispensing mechanism when door is locked. Tissue rolls are loaded and locked into dispensing mechanism. Depleted rolls can only be removed after unlocking door. Measures 6-1/16″ width by 11″ height by 5-15/16″ depth.

To remove concealed wall plate from back of flange and Mounting bracket, loosen setscrew. Mount wall plate so prongs are at top; secure with two sheet-metal screws, furnished by manufacturer, at points indicated by an S. Engage Mounting bracket onto prongs of wall plate, then secure unit into position by tightening setscrew at bottom of flange. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with screws furnished, or provide 1/8″ (3mm) toggle bolts or expansion bolts. For partitions with particle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts, nuts, and washers. For hollow-core metal partitions, provide solid backing into which the furnished sheet-metal screws can be secured. Cap shall be 14 gauge, welded to the support arm.

Bobrick 33043 Cat 74 Key for Towel Dispensers, Metal Key

Kitchen organization and food preparation is even easier and more convenient thanks to the Jabowd Magnetic Knife Holder

Preparing food is far easier when you’ve got the counter space to move your vegetables, meats and sweet treats around without bumping into a large knife block. That’s why we’ve developed a better way to prepare and cook your favorite foods, with the Jabowd Magnetic Knife Strip.

Why should you use a magnetic knife holder?

• It will help you clear out your drawers and declutter your countertops and at the same time add a modern design approach to proudly display your kitchen cutlery.
• Traditional knife blocks are bulky, hard to clean and maintain.
• A 19.5-inch magnetic knife holder rack is perfect for up to eleven knives.
• Durable extra strong magnets will keep your kitchen knives in place and prevent knives from falling.
• This magnetic knife bar is a great storage option for kitchen knives and could also be used as a magnetic strip for tools. Can be installed in a garage or craft room to hold any metal tool.

Important: Our magnetic knife storage strip has very strong magnets and is designed for fast and easy installation. All hardware (2 screws and drywall anchors) and instructions included!

Product Features:

• Food-Grade Safe Stainless Steel
• Ultra-Strong Magnet
• Rust Resistant
• Easy to Clean
• Use in Kitchen, Garage, Hobby Areas
• Holds Metal Kitchen Utensils, Knives and Carving Tools
• Hardware Included

ORGANIZE YOUR KITCHEN AND ADD TO CART NOW AND BUY TODAY!