982 reviews analysed
1. The Hillman Group 831493 1/4 X 1-1/2-Inch Stainless Steel Hurricane Bolt, 100-Pack
Description
Product Description
Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
From the Manufacturer
Hurricane Bolts are made of strong abd durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
2. Simpson Strong-Tie 5005069 3.5 in. Washer Wood Screw44; Black 3-1/2"
Description
The Outdoor Accents Structural Screw Reduces Installation Time By Driving Easily Without Predrilling. When Combined With The Patent-Pending Load Rated Outdoor Accents Structural Washer, The Solution Delivers The Decorative Appearance Of A Bolt Connection But With A Much Easier Installation Than Through-Bolting. The Structural Screw And Washer Are Sold Separately From Each Other And The Outdoor Accents Connectors. Its Bold Thread Design Enables Superior Holding To Attach Ledgers And Other Connections. These Are Complete Line Of Heavy-Duty Shop Products That Will Bring You Years Of Reliable Performance.
3. CONFAST 1/4" (Inside/Screw 1/4-20 Diameter) Machine Screw Anchor with 1 Setting Tool (100 per Box)
Feature
- SHALLOW EMBEDMENT OPPORTUITIES-Less time required to drill hole
- NATIONAL COARSE THREADS-Bolts and threaded rod is most common type available
- INTERNAL THREADS Easy-removabilityWORKS IN MOST MASONRY MATERIAL-Consistent holding values in wide variety of base materials
- REQUIRES THE USE OF A SETTING TOOL-Setting tool allows for proper positive expansion of the anchor
Description
Applications
The anchor is made from Anchor Body Antimonial Lead Alloy/Cone Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Moist environment.
Head Style
The anchor is a head
Hole Diameter/Bit Diameter
The anchor requires a 1/2″ hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Driver Required
A is required for driving the anchor into the base material.
Diameter of Anchor
The diameter of the anchor is 1/4″.
Length Anchor
The length of the anchor is 7/8″
Thread Length
The length of the threads on the anchor is in length.
Minimum Embedment
The minimum anchor embedment into the concrete is 7/8″. Therefore, the anchor must be installed so that a minimum of 7/8″ of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is . This will ensure that the minimum embedment of 7/8″ will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4″ diameter anchor requires the hole in the fixture to be 9/16″.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 5″ from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 2-1/2″ from an unsupported edge of the concrete.
4. Simpson Strong Tie SPS25344-KT Storm Panel Screw, 305 Stainless Steel, 25 Screws, Wing Nuts and Caps and 1 Hex Driver Bit, 1 Carbide Drill Bit
Description
Product Description
Ideal for attaching storm panels to wood, concrete and masonry
From the Manufacturer
Ideal for attaching storm panels to wood, concrete and masonry
5. CONFAST 1/4" x 3" Hammer Drive Nail in Anchor (100 per Box)
6. CONFAST 1/4" x 1-1/2" Hammer Drive Nail in Anchor (100 per Box)
7. CONFAST 1/4" x 2" Hammer Drive Nail in Anchor (100 per Box)
8. Door/Window Permanent Hurricane Anchoring Kit
9. Hard-to-Find Fastener 014973281267 281267, 1/4-20″, 12 Anchors
Description
We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed builder or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.
10. Premium Quality Grey Ribbed Plastic Anchors, 100 Pack (#6-8 x 7/8")
Feature
- These plastic anchors are intended for light duty anchoring applications and offer extra support
- The split in the ribbed anchors expand on two opposing sides as you tighten the screw
- Ribs prevent the anchor from turning in the hole during installation
- The split in the anchor ensures three way expansion on sides for increased holding power
- 3/16″ Drill Size. Once anchor installed, they provide a flush, clean appearance in drywall. Packaging design may vary.
Conclusion
By our suggestions above, we hope that you can found Hurricane Fasteners Leadbrass Machine Screw Anchor for you.Please don’t forget to share your experience by comment in this post. Thank you!