The Best How To Test Oven Sensor

316490000 Oven Temperature Replacement for Frigidaire , 18-month warranty, oven Probe, 3.5″ cable and female connector. Please check connector form factor and Hole pattern before purchasing product. This product is NOT made by Frigidaire.

Oven Sensor Probe Part number WB21X5301.This Oven Temperature Sensor Probe measures 6″ from tip to bracket,measures 7-1/8″ overall.

SPECIFICATIONS
This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperature. The sensor detects the temperature in the oven cavity. Often, if the sensor is defective, the oven temperature will fluctuate and be inaccurate by more than 50 degrees. The tool needed for this replacement is a #2 square head screwdriver or a #2 Philips screwdriver. Remember to unplug the range before installing the part.

Works with the following models:
Kenmore 66475279502, 66495272502, 66495273502, 66495274502
Whirlpool 4KWFC120MAW0, 4KWFE7685ES0, 4KWFE7685EW0, 4RF315PXKQ0

Replaces part numbers: 8273902, W10131826, W10181986, WPW10181986VP

Works with most top name brands: Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Estate, Inglis, Roper, Magic Chef, Crosley

Fixes the following symptoms:
Little to no heat when baking
Oven not heating evenly
Oven is too hot
Will not start

Count on our W10181986 oven sensor for an unrivaled mix of durability, convenient functionality, and great value for money. Click ‘Add to Cart’ now!

If you are unsure our replacement part will fit your appliance model, you can ask us in Customer questions & answers section or contact us by visiting the Blue Stars LLC storefront — click the “Blue Stars LLC” on a product page to get to the storefront — then click the “Ask a question” link under Further Information. Select your reason, and then tell us about the question.

The Whirlpool brand names and logos are the registered trademarks of their respective owners. Any use of the Whirlpool brand name or model designation for this product is made solely for purposes of demonstrating compatibility.

Instruction:
This sensor module utilizes DHT11 as the sensitive component and has a bypass capacitor and a pull-up resistor on-board. The DHT11 is a pre-calibrated digital output temperature and humidity sensor. The single-wire wiring scheme makes it easy to be integrated to other applications. The simple communication protocol greatly reduces the programming effort required.

Specification:
Power supply voltage: 3.3~5.5V DC
Output: the single bus digital signal
Measuring range: 20-90%RH humidity, temperature 0~50°
The measurement accuracy of +-5%RH: humidity, temperature +-2 °
Resolution: 1%RH humidity, temperature 1 °
Exchangeability: fully interchangeable
Long term stability: < ±="">
Size: 28 * 12 * 7.2mm

Interface Description:
1.VCC:External 3.3 V-5 V
2.GND:External GND
3.DO:Small board switch digital output interface, connect the microcontroller IO port

Package Included:
5* DHT11 Module
5* Dupont Cable

Super Exquisite and Durable Icemaker Control Board Kit

How To Test The Whirlpool Ice Maker Optic Control Boards 4389102
Diagnostics 1 : First, open the freezer door and look at the status LED on the right hand side. Make sure the ice maker control is turned “ON”. The status LED should blink twice, pause, and then repeat (blink blink…. pause. blink blink… pause).
Diagnostics 2 : Next, with the freezer door open, hold down the flapper door on the left hand side to un-block the optics beam. With the optics beam unblocked, the status LED should light up and stay on (not blink). If the status LED continues to blink twice, then you have faulty optic control boards and they will need to be replaced.
Diagnostics 3 : If there is no status LED light, then the ice maker could be in “harvest” mode. Hold down the freezer light switch, the status LED should flash every second while in harvest mode. If the LED light still does not light up, then the optic control boards will need to be replaced.

How To Replace The Whirlpool Ice Maker Optic Control Boards 4389102
Step1: First, unplug the refrigerator.Remove the three Phillips screws on the right hand side.
Step2: Disconnect the wire harness on the back side and then remove the two Phillips screws to release the receiver control board from the housing. Re-install the receiver board in the reverse order.
Step3: Next, remove the three Phillips screws on the left hand side.
Step4: Disconnect the wire harness on the top side and then remove the two Phillips screws to release the emitter control board from the housing. Re-install the emitter board in the reverse order.

Specification:
Brand: KONDUONE
Condition: 100% Brand New and never used
Package Includes:
1 x 4389102 Icemaker Sensor Control Board Kit with Instruction Manual

Temperature Sensor Kit 12001656 measures the oven temperature. Temperature Sensor Kit WP8053344 can be use instead of 12001656. Fits Whirlpool, Maytag, Amana, Magic Chef, Jenn Air, and some other models. Replaces part numbers: AP4009009, 8189679, 04000052, 04100258, 12001357, 12001554, 12500029, 1364, 7-4657, 704657, 71003083, 74003390, 74004471, 74004943, 74005193, 7430P003-60, 7430P005-60, 7430P008-60, 7430P008-60K, 7430P010-60, 7430P042-60, 879368, AH1570174, EA1570174, PS1570174, W10127323, Y04000052, Y04100258, Y704657

The 12001656 Oven Sensor is also commonly known as a temperature sensor. It is designed for use with ovens and ranges. It is similar to a thermostat; it measures and regulates the internal temperature of your oven cavity. There is an adapter at one end, a probe at the other, and they are connected by an insulated wire. The probe is approximately 7 inches long. You can test the sensor with a multi-meter for functionality. You need to check the model-specific manual to determine what the proper resistance is for your specific appliance. This oven sensor comes with two wire harness adapters and a set of instructions.

Works with most top name brands: Maytag, Jenn-Air, Magic Chef, Whirlpool, Amana, Admiral, Crosley, Norge, KitchenAid, Kenmore, Hardwick, Litton.

Replaces part number: 04000052, 04100258, 12001357, 12001554, 12001656, 12001656VP, 12500029, 1364, 704657, 71003083, 74003390, 74004471, 74004943, 74005193, 7430P003-60, 7430P005-60, 7430P008-60, 7430P008-60K, 7430P010-60, 7430P042-60, 7-4657, 8189679, 879368, AP4009009, W10127323, Y04000052, Y04100258, Y704657

Fixes the following symptoms:
Little to no heat when baking.
Oven is too hot.
Will Not Start.
Oven not heating evenly.
Touchpad does not respond.
Will not program.
Door won’t open after self cleaning cycle.
Element will not heat.
Little to no heat when broiling.

Count on our 12001656 Oven Sensor Replacement for an unrivaled mix of durability, convenient functionality, and great value for money. Click ‘Add to Cart’ now!

The picture can tell more than we can, what you see is what you will receive,please make sure it will fit your machine before bidding it.
Please check pictures for more details.

The AstroAI AM33D Multimeter is designed to safely and accurately troubleshoot a variety of automotive and household electrical problems. It’s easy and safe to operate and features many different functions for measuring current, voltage, and resistance, as well as continuity, transistor, and diode testing, which is both for automotive and household uses. Use this multimeter for: household outlets, fuses, wiring, general-purpose batteries, vehicle battery and charging system, automotive circuits and more.

Note:
1. When the Meter is working at an effective voltage over 60V in DC or 30V rms in AC, special care should be taken because there is a danger of electric shock.

2. Before using the Meter, inspect the exterior casing. Do not use the Meter if it is damaged or if all or part of the exterior casing is removed. Look for cracks or missing plastic. Pay special attention to the insulation around the connectors.

3. If you have mistakenly connected the red test lead to the 500mA selection, then used this meter to test larger current(like 10A) or higher voltage, it might probably burn out the wires even the meter.

4. If you are the beginner, you should have known some basic physical concecpts and basic methods of using a meter, you also should have read the user manual carefully and known the consequences of misuse because any misuses will probably cause serious results.

5. This multimeter can not be used to test EMF.

Specifications
Max.display: 1999, 3 1/2 digits
Range selection: Manual ranging
Overload display: “1” is displayed
Sampling Speed: 2 times per second
Low Battery Indication
Power: 1 x 9V 6F22 Battery Included
Diode Test: Yes
Continuity Test: Yes
Square Wave Output: Yes
Dimensions: 5.1″ x 2.8″ x 1.4″
Safety/Compliances: IEC61010 CAT.I 600V, CAT.II 300V, double insulation
DC Voltage: 200mV/2000mV/20V/200V ±(0.5%+3), 500V (1%+5)
AC Voltage: 200V/500V ±(2%+10)
DC Current: 2000μA/20mA ±(1.8%+2), 200mA ±(2%+2), 10A ±(2%+10)
Resistance: 200Ω ±(1%+10), 2000Ω/20KΩ/200KΩ ±(1%+4), 20MΩ ±(1%+10), 200MΩ ±[5%(reading-10)+10]

Package Includes
1 x AstroAI AM33D Digital Multimeter
1 x 9V 6F22 Battery
2 x Test Leads
1 x User Manual

Product Description

This handy standard receptacle tester features a compact, comfortable, contoured design with neon indicators that display positive indication of circuit status. Compact unit simply plugs into any standard 3-wire/grounded receptacle (110-125 V AC circuits) and a succession of yellow and red lights provides indication of circuit status or specifies wiring errors. Lamps reveal 5 common wiring errors including: open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse, as well as correct wiring. Easy to read status chart displayed on both top and bottom of the tester for multiple position viewing. Designed for use on standard outlets and extension cords. ETL approved unit.

From the Manufacturer

This simple tester makes quick work out of any electrical project.