The Standard Double Keg Kegerator Conversion Kit comes with everything you will need to successfully convert your refrigerator or chest freezer into a two product draft beer cooler. This keg tap kit is designed to run two completely separate kegs. Depending upon your refrigerator capacity, you can run 2 full size kegs, 2 pony kegs, 2 6 gallon kegs or any combination you choose. All the draft beer parts are of the highest commercial grade quality which are designed and built to last. Please Note: Beverage Factory is the only Authorized Reseller of Kegco products. Products purchased outside of Beverage Factory are not genuine Kegco parts and will not be covered under Kegco’s 1-year warranty.

Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year

Package Included:
1x ITC-308 Temperature Controller
1x Manual

NutriChef Model : PKBRTP50

Homebrew Mini Keg System, 64 oz.

Homebrew Mini Keg – Stainless Steel CO2 Home Keg Dispenser System (64 oz.)

Features:

What’s in the Box:

Technical Specs:

The NutriChef Homebrew Mini Keg – Stainless Steel CO2 Home Keg Dispenser System (64 oz.) – Compact & Portable Mini Keg System – Homebrew CO2 System Keeps Carbonated Beverages Fresh All Day – Includes All Necessary Installation Components & Hardware – Solid Stainless Steel Construction Keep Beverage Colder, Longer – Made of Food Grade S/S 304 Rust Proof Stainless Steel – Easy to Assemble – Easy to Fill – Easy to Clean – What’s in the Box: – Stainless Steel Keg – Brass Tap – Assembly Hardware – Neoprene Koozie – Technical Specs: – Keg Liquid Volume Capacity: 64 oz. – CO2 System: 30 PSI, Safety Pressure Regulated – Standard Threaded CO2 Cartridge Compatibility (Not included) – Construction Material: Food Grade 304 Stainless Steel – Total Assembled Dimensions: 7.5’’ x 6.9’’ x 13.4’’ -inches.

Keep your beer tasting brewery fresh with the this kegerator cleaning kit. This Kit works by removing buildups of bacteria, molds, yeast, and beer stone from your beer lines, faucet, and keg coupler. The Kit comes with a one quart shatter proof bottle and enough beer line cleaning compound for about 17 cleanings. The 5/8″ Nylon Faucet Brush can clean the toughest buildups in your coupler and faucet. The Check Ball Lifter inserts into the bottom of the coupler probe and lifts the check ball, permitting cleaning solution to flow through the coupler when cleaning your system. This saves time by eliminating the need to remove the coupler while cleaning the system. The kit even comes with an extra neoprene washer and faucet wrench in case you lose your originals. A handy instruction manual walks you through the cleaning process and in as little as 15 minutes, you will have a sanitized kegerator, providing you with beer tasting brewery fresh.

Warm Tips: 
  The type of coupling configuration is the area that must match. Keg couplers are categorized by letters (I.e., S, G, U, D).  
Each beer keg requires one and only one of these couplers. American beers typically use a D coupler. European beers typically uses a S coupler 
 
How to check whether the sankey d keg coupler leaks or not？ 
The best way to check is to spray it with soapy water when it is under pressure and look for bubbles.
There is a white lug under the gas in nipple that is held on by a hex nut. That prevents backflow into the regulator and also acts as a seal.
It’s possible that that hex nut is not tightened enough or that check valve is misaligned, causing a bad seal

Package Includes:  
1* Keg Coupler D System

This mini dehumidifier has been design to adsorb moisture from small enclosed areas (maximum area: 10’x 10′). It will help protect clothes and valuables from the damaging effects of mold/mildew and moisture rot. It is 100% renewable and needs no power to operate. Just hang the eva-dry unit in a closet, or you can place it in other small enclosed spaces, and it will start to adsorb moisture. There are no batteries required or cords to plug in, the unit works without power. There is an indicator window with special “moisture meter crystals” that change from orange (when dry) to green (when wet) to indicate when the unit needs to be “renewed”. The unit will adsorb approximately 8 to 10 ounces of moisture (depending on humidity levels this should take between 3 – 8 weeks). Once the moisture has been adsorbed it cannot leak or spill. This unit uses a specialized engineered crystallized silica gel that is odorless, non-toxic and completely safe. When the indicator crystals turn Green it is time to “re-new” the unit. Simply remove the unit from where it is adsorbing moisture and plug it into a power outlet.

SPECIFICATIONS:

Size: 3/16″ Inside Diameter 7/16″ Outside Diameter

• Working Pressure: 30 PSI
• Burst Pressure: 90 PSI
• Working Temperature: 23°F – 176°F
• Suits most barbed fittings and connectors
• Cost Effective, Non Toxic, and BPA-Free
• For chemistry and lab experiments
• Mini fountain
• Dishwasher fittings
• Spa fittings
• Blow off tube
• Potable water
• Low pressure air line

Also available in the following lengths (please see corresponding ASIN):

• 25 Feet: B01HDNNYPO
• 50 Feet: B07CPMS5MQ

Use this handy controller to regulate the temperature in your freezer between 20 – 80F . Great for turning a chest freezer into a keg refrigerator. Strictly a mechanical thermostat for cooling only, it is simple to use and economical. It operates with a gas filled probe on a 6-foot capillary tube. When the gas contracts or expands in the probe, it triggers a mechanical device inside the control which turns the power on or off. There is no probe temperature readout on the dial, so keeping a thermometer inside the refrigerator is highly recommended to keep track of the actual temperature. On most refrigerators, the controller will allow a usable range of 37 to 80 F, while on freezers, the controller will be able to reach its full 20 to 80 F range. Features: Made of stainless steel. Adjustable with the turn of a knob. No drilling necessary. Plug unit into wall and then run the sensor into your freezer. Male and female plug in one. Specs: Temperature dimensions: 4 3/8″ H x 2 1/8″ W x 1 1/2″ D. Cord dimensions: 6′. Remote sensor bulb: 5 1/2″W. Remote sensor bulb capillary tube: 6′. Temperature range: 20 – 80F. Voltage: 120 VAC.

Liquid Beer Line Cleaning Kit, Gravity Feed Detailed, illustrated , easy to use instructions included! Featuring 8 oz. bag of “Brew Clean” – a safe, and easy powered form cleaner, Made in the USA! Assembled in the USA from Domestic and foreign components. Metal Faucet Wrench, Made in the USA! Bottle is marked in both ounces and ML and is Made in the USA. Ball Lifter for holding check valve ball on beer coupler (also called tap) open so liquid can pass through beer coupler (no need to remove like some cleaning kits!) CMBecker black plastic connection for connecting the cleaning line directly to the tower or standard shank High quality faucet brush is included. Info on assistance is included in instructions should you need help with this product. We don’t think you will after you see the Instructions! Shipping offer is valid only to residents of contiguous US.

Bring Intelligence to Your Taps

Kegtron is an smart keg monitoring system that takes the guesswork about serving drinks on tap. Keep precise track of your inventory with an easy-to-use app for your phone or tablet. Works with any size keg, homebrew or commercial.

How It Works

The Kegtron keg monitor hardware installs inline between your keg and tap and keeps a constant watch over what comes out of your keg. Put it in your fridge, kegerator or keezer: the splash-resistant hardware is simple to install and made for messy environments. Use any combination of single and dual keg monitors to match your needs.

From your phone or tablet, all of your keg stats are just a click away. Ready for a single tap kegerator or a wall of 20+ handles, the iOS and Android apps easily accommodate both the home beer lover and the tap room.

Kegtron at Home

Full Visibility – No more guessing, always know what’s on tap
Show Off – Impress your friends with your upgraded kegerator
Plan Ahead – Be ready for the next party or brew day
Keep it Clear – Stop shaking your kegs and stirring up sediment
Any Keg – Any keg size, any keg type

Kegtron at the Bar

Inventory – Know exactly how much beer you have on-hand at any time, no more guesswork
Planning – Know when you need to reorder or change kegs before busy events
Tracking – Do your keg stats match your register sales? Know when you’re losing beer to spillage or give-aways
Easy to Install – Quick setup you can do yourself, no pro installation needed, no network setup
Easy to Use – Simple app with all the key stats available at a glance. No training needed
Affordable – Much less expensive than complex corporate-level systems. No monthly subscription fees
Not Just for Beer – Works with cider, wine, cold brew coffee and more