Nowadays, there are so many products of how to convert a freezer into a kegerator in the market and you are wondering to choose a best one.You have searched for how to convert a freezer into a kegerator in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings how to convert a freezer into a kegerator which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
912 reviews analysed
1. Johnson Controls A19AAT-2C Freezer Temperature Controller (D132)
Description
Use this handy controller to regulate the temperature in your freezer between 20 – 80F . Great for turning a chest freezer into a keg refrigerator. Strictly a mechanical thermostat for cooling only, it is simple to use and economical. It operates with a gas filled probe on a 6-foot capillary tube. When the gas contracts or expands in the probe, it triggers a mechanical device inside the control which turns the power on or off. There is no probe temperature readout on the dial, so keeping a thermometer inside the refrigerator is highly recommended to keep track of the actual temperature. On most refrigerators, the controller will allow a usable range of 37 to 80 F, while on freezers, the controller will be able to reach its full 20 to 80 F range. Features: Made of stainless steel. Adjustable with the turn of a knob. No drilling necessary. Plug unit into wall and then run the sensor into your freezer. Male and female plug in one. Specs: Temperature dimensions: 4 3/8″ H x 2 1/8″ W x 1 1/2″ D. Cord dimensions: 6′. Remote sensor bulb: 5 1/2″W. Remote sensor bulb capillary tube: 6′. Temperature range: 20 – 80F. Voltage: 120 VAC.
2. Kegco Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit with 5 lb. Co2 Tank
Feature
- DUAL GAUGE REGULATOR: This Kegco 542-2 Commercial Grade Double Gauge Regulator has a y-splitter and two independent shut-off valves that let you dispense up to two kegs at the same pressure. It features a chrome plate brass body, two gauges to display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi.
- LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L D System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- TWO CHROME BEER FAUCETS WITH BRASS LEVERS: Featuring a forged brass body and highly polished chrome finish, these NSF-approved Kegco CFBL beer faucets put a stylish finishing touch on your kegerator at a price you’ll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles.
- STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4″ length.
- INCLUDES EMPTY 5 LB. ALUMINUM CO2 TANK: All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. . These eye-catching tanks have a glossy red coating that acts as an extra layer of protection against corrosion and wear.
Description
With Kegco’s Standard Dual Keg Kegerator Conversion Kit, do-it-yourself beer lovers will have all of the tools they need to convert a refrigerator or freezer into a two product draft beer dispenser that has all of the exciting features that professionals love. Included in this kit are high quality and high performance parts like a commercial-grade dual gauge regulator that allows you to monitor both the CO2 pressure in your keg and the CO2 volume in your tank, and lever handle keg couplers that are more durable and long-lasting than wing handle couplers. Once the conversion process is complete, your new kegerator will be able to run 2 full-size kegs, 2 pony kegs, 2 five gallon kegs, or any combination you choose, depending on the capacity of the refrigerator or freezer that you have converted.
3. Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
Feature
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Description
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
4. Inkbird Pre-Wired Dual Stage Digital Temperature Controller Outlet Thermostat 110V, 1100W Heating and Cooling Multi-purpose Controllers for Aquaria, Reptile Keeping, and Brewing Fermentation Kegerator
Feature
- Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
- Be able to connect with refrigeration and heating equipment at the same time.
- Easily calibrated.
- Can display in Centigrade or Fahrenheit.
- Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
Description
Features:
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Temperature calibration
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
Package Content:
1x Temperature controller ITC308
1x Manual
5. Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding
Feature
- Plug and play design, easy to use
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Support reading with Centigrade or Fahrenheit unit
- Maximum output load: 1100W(110V)
- Dual display window, be able to display measured temperature and set temperature at the same time
6. bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-wired, 2 Stage Heating and Cooling Mode, 110V – 240V 15A
7. Inkbird Combination Humidity Controller IHC200 + Temperature Controller ITC308, ITC306T, ITC310TB (IHC-200 + ITC-308)
Feature
- IHC-200: Switch the modes between humidification and dehumidification automatically.
- ITC-308: Dual relay allowing you to easily connect with refrigeration and heating equipment to realize ideal temperature control.
- ITC-306T: Heating output temperature controller(No Cooling Control) with time function specifically for breeding and planting.
- ITC-310T: Dual relay, programmable outlet thermostat, which can auto-execute to control 12 periods times with different temperatures based on its timer function.
- Frequently bought together
Description
IHC-200 Humidity Controller
Power Input: 100 ~240VAC, 50Hz/60Hz
Power Output: Max. 10A, 100V ~240V AC
Humidity Measuring Range : 5%-99.99%RH
Humidity Control Range : 5%-99%RH
Resolution: 1%RH
Accuracy: ±3%RH
Sensor model: AM-2301
Sensor stability: <0.5%rh r="">0.5%rh>
Sensor Length:2m / 6.56ft
Relay Contact Capacity:
Humidification (12A, 100-240VAC)
Dehumidification (12A, 100-240VAC)
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Dimension: Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Ambient Temperature : -30~ 75 ° C / -22~ 167 ° F
Storage: Temperature -30~ 75 ° C / -22~ 167 ° F
Humidity 20~85% (No Condensate)
ITC-310TB Temperature Controller
Temperature Control Range:-50~120℃ /-58~248 ℉
Temperature Resolution:0.1 ℃ / 0.1℉
Measuring Accuracy:±1℃ (-50 ~ 70℃) / ±1℉ (-58 ~ 158℉)
Temperature Control Mode:On/Off Control, Heating and Cooling
Timing Range:1~999 (min/hour/day)
Periods of Time:Max: 12 periods
Cycle Setting:1-999 times cycle, or 00 infinite cycle
Input Voltage:100 ~240VAC, 50Hz/60Hz
Control Output
Current: Max.10A
Voltage: 100~240V AC
Power: Max.1200W(110V)/2200W(220V)
Alarm:High and Low Temperature Alarm
Sensor Type:NTC Sensor(including)
Sensor Length:2m / 6.56ft
Relay Output
Cooling(10A,100-240VAC)
Heating(10A,100-240VAC)
Input Power Cable Length:1.5m (5ft)
Dimension:140x68x33 mm(body)
Operating Ambient Temperature:-30~ 75 ℃ / -22~ 167℉
Storage Condition
Temperature: -20~ 60℃ / -4~ 140℉
Humidity: 20~85% (No freeze or moisture condensation)
Package
1 x IHC-200 Humidity Controller
1 x ITC-310TB Temperature Controller
8. Inkbird Digital Outlet Heat Temperature Controller with Day Night Control for Brewing Aquarium Breeding Reptiles Hatching Heat Mat
Feature
- ????????【Convenient Design】 Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
- ????????【Dual Display Window】 Be able to display measured temperature and set temperature at the same time.
- ????????【Only Heating】 Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
- ????????【Dual Time Cycle Setting】Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
- ????????【Different Functions】Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
9. Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor 2 Relays ITC-1000
10. Inkbird 10A 110V Digital Thermostat with Heat and Cool Relays ITC-308 Home Brewing
Feature
- [Convenient Design] Plug and play, easy to use.
- [Reading Mode] Support reading with Centigrade or Fahrenheit unit.
- [Safe] Maximum output load: 1100W(110V).
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
Conclusion
By our suggestions above, we hope that you can found How To Convert A Freezer Into A Kegerator for you.Please don’t forget to share your experience by comment in this post. Thank you!