Finding your suitable readers for convert fahrenheit to fan oven is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for convert fahrenheit to fan oven including detail information and customer reviews. Let’s find out which is your favorite one.
809 reviews analysed
1. Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
Feature
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Description
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
2. bayite AC 110V Fahrenheit Digital Temperature Controller 10A 1 Relay with Sensor
Feature
- KEEP TEMPERATURE IN DESIRED RANGE: It’s on/off control mode. Turn on your device at a degree and turn it off at another degree. The difference of the 2 degrees can be minimum 1 and maximum 25.
- HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device your need.
- LONG SENSOR CABLE: 3m/9.8ft. Size of the WATERPROOF probe head: 4mm*20mm
- WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc.
- With compressor delay protection function for refrigerating control
Description
This is an AC 110V Fahrenheit Digital temperature controller. It can control the power to a freezer to prevent it from getting too cold, or control the power to a terrarium to prevent it from getting too hot, maintain a stable environment.
This controller provides heating and cooling modes and temperature alarm function.
For example:
If you choose heating mode, set control Value to 100°F, set span value to 10°F. The relay will be connected when temp drop to 90°F. The relay will be disconnected when temp reaches 100°F;
If you choose cooling mode, set control Value to 100°F, set span value to 8°F. The relay will be connected when temp reaches 108°F. The relay will be disconnected when temp drops to 100°F
Specification:
1.Power supply for the controller: AC 110V, 50/60Hz
2.Temperature unit: Fahrenheit, Measure range: -4 ~ 220°F
3.Temperature measure resolution: 1
4.Accuracy: ±0.5
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 1 – 25(Max temp span between ON and OFF)
7.Control resolution: 1(Minimum temp span between ON and OFF)
8.Power consumption: less than 3W
9.Relay contact capacity: 10A/250VAC, 10A/110VAC
10.Data retention: Yes
11.Compressor delay protection: YES
12.Product size:8.5*7.5*3.5cm / 3.4*3*1.4in
13.Sensor Cable length: 3m/9.8ft
Package Content:
1x Digital Temperature controller
3. Inkbird AC 100 to 220V ITC-100VH Digital PID Thermostat Temperature Controller 25DA SSR Black Heat Sink K Thermocouple
4. Inkbird 10A 110V Digital Thermostat with Heat and Cool Relays ITC-308 Home Brewing
Feature
- [Convenient Design] Plug and play, easy to use.
- [Reading Mode] Support reading with Centigrade or Fahrenheit unit.
- [Safe] Maximum output load: 1100W(110V).
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
5. Inkbird F Display PID Temperature Controllers Thermostat ITC-106VH, K Sensor, Heat Sink and Solid State Relay, 100ACV – 240ACV (ITC-106VH + 40A SSR + White Heat Sink + K Probe)
Feature
- ✨✨Support reading with Centigrade or Fahrenheit unit
- ✨✨Dual display window, be able to display measured temperature and set temperature at the same time
- ✨✨Simplify operational processes and you don’t need to operate more steps if you want to set the definite value
- ✨✨High accuracy of displaying and controlling. Manual and Auto turning are available
- ✨✨1 Year Warranty
Description
Specification
Front Panel Dimension: DIN 48mm(W)X48mm(L)
Power Supply Voltage: AC 100-240V 50/60Hz
Operating voltage range: 85~110% Rated voltage
Power Consumption: Approx. 5VA(100~240VAC)
Character: PV: 4 digital 9.9mm height Red LED Letters
SV: 4 digital 8mm height Green LED Letters
Display Accuracy: ±0.2%FS 0.1ºC(<1000ºC);1ºC(≥1000ºC)
Period of Sampling: 0.5S
Temperature Compensation: 0-50ºC
Life expectancy of Relay: Mechanical≥10,000,000 operations Electrical≥10,000,000 operations
Weight: Approx. 140g
Environmental Conditions: -10~55ºC(no icy or condensation), RH 35-85% Humidity
Storage Temperature: -25~65ºC(no icy or condensation)
Data Storage: 10year Cutout size: 45x45mm
Mounting Method: Flush mounting and screw terminals
K-Type Thermocouple Temperature Sensing For Temperature Controller
Temperature rang :0-400 C
Sensor Dia: 4.5mm
Cable Length: 2m(6.6ft)
External Shielding: Insulated Shielding
Internal Insulation:Fiberglass
40A SSR SOLID STATE RELAY for temperature controller
Specifications:
Load Voltage: 24-380VAC
Load Current: 25A
Input Voltage: DC 3-32V
Pacakge:
1x Inkbird ITC-106VH Controller
1 x 40A SSR
1x Mounting bracket
1 x K sensor
1x White Heat Sink
1x Manual
6. Broan 345SOWW Surface Mount Solar Powered Attic Ventilator, 28-Watt, Weathered Wood
Feature
- SOLAR-POWERED VENTILATOR: 28-Watt solar-powered attic ventilator converts sunlight into electric power, providing a maximum 537 CFM year-round
- DURABLE: Housing constructed of UV-stabilized, color-dyed, rugged ABS plastic and rugged, tempered glass solar panel are built to withstand large hail and resist deteriorating over time
- DURABLE: Housing constructed of UV-stabilized, color-dyed, rugged ABS plastic and rugged, tempered glass solar panel are built to withstand large hail and resist deteriorating over time
- EASY INSTALLATION: Compact base footprint and housing frame with positive stops to “seat” the dome allow for a fast and easy installation – Recommended for use with a shingle roof only
- ATTRACTIVE: Low profile, integrated design for an attractive, unobtrusive addition to your roof without the need for props or pivoting stands used by some manufacturers
Description
Upgrade your home with Broan-NuTone’s Solar-Powered Attic Ventilator! This ventilator features a 28-watt solar panel that captures sunlight to efficiently convert it into electric power, keeping your attic cool and dry all day long at a maximum 537 CFM. The 12” diameter, one-piece aluminum 5-blade fan is pitched for maximum air flow to keep your living area cooler, extend the life of your air conditioner and save energy and money. The low-profile, integrated design creates an attractive, unobtrusive addition to your roof without the need for props or pivoting stands. The housing, constructed of UV-stabilized ABS plastic, and rugged, tempered glass solar panel withstands large hail and won’t delaminate or fade over time due to weather. Installation is quick and easy with the compact base footprint allowing for fewer shingles to be cut and housing frame including positive stops to “seat” the dome. This unit includes stainless steel fasteners and galvanized steel brackets for durability and corrosion resistance, and aluminum, heavy-gauge screen to keep out insects, animals or birds without impeding airflow. Optional thermostat is easy to install and disables the motor when the temperature dips below 50-degrees, to extend motor life; recommended for climates where cold weather condensation isn’t a concern. Save energy with Broan-NuTone’s Solar-Powered Attic Ventilator!
7. Inkbird ITC-106VH AC 100 to 240V PID Temperature Thermostat Controllers F and C K Sensor 25DA SSR Solid State Relay for Sous Vide Home Brewing
Feature
- Support reading with Centigrade or Fahrenheit unit
- Dual display window, be able to display measured temperature and set temperature at the same time
- Simplify operational processes and you don’t need to operate more steps if you want to set the definite value
- High accuracy of displaying and controlling. Manual and Auto turning are available
- Power Consumption: Approx. 5VA(100~240VAC)
Description
Specification
Front Panel Dimension: DIN 48mm(W)X48mm(L)
Power Supply Voltage: AC 100-240V 50/60Hz
Operating voltage range: 85~110% Rated voltage
Power Consumption: Approx. 5VA(100~240VAC)
Character: PV: 4 digital 9.9mm height Red LED Letters
SV: 4 digital 8mm height Green LED Letters
Display Accuracy: ±0.2%FS 0.1ºC(<1000ºC);1ºC(≥1000ºC)
Period of Sampling: 0.5S
Temperature Compensation: 0-50ºC
Life expectancy of Relay: Mechanical≥10,000,000 operations Electrical≥10,000,000 operations
Weight: Approx. 140g
Environmental Conditions: -10~55ºC(no icy or condensation), RH 35-85% Humidity
Storage Temperature: -25~65ºC(no icy or condensation)
Data Storage: 10year Cutout size: 45x45mm
Mounting Method: Flush mounting and screw terminals
K-Type Thermocouple Temperature Sensing For Temperature Controller
Temperature rang :0-400 C
Sensor Dia: 4.5mm
Cable Length: 2m(6.6ft)
External Shielding: Insulated Shielding
Internal Insulation:Fiberglass
25A SSR SOLID STATE RELAY for temperature controller
Specifications:
Load Voltage: 24-380VAC
Load Current: 25A
Input Voltage: DC 3-32V
Pacakge:
1x Inkbird ITC-106VH Controller
1 x 25A SSR
1x Mounting bracket
1 x K sensor
1x Manual
8. Inkbird ITC-308 Digital Temperature Controller Outletsmoker Thermostat, 2-Stage, 1100W, with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding
Feature
- Plug and play design, easy to use
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Support reading with Centigrade or Fahrenheit unit
- Maximum output load: 1100W(110V)
- Dual display window, be able to display measured temperature and set temperature at the same time
9. Inkbird Digital PID Temperature Controller Position Control Thermostat AC 12 to 24V ITC-100VL
Feature
- Multiple temperature sensors (K, S, Wre, T, E, J, B, N, CU50, PT100)
- PID and ON/OFF Control Mode with high standard self-adjust function
- Omron relay inside
- Self-adjusting function and intelligent control of the instrument to ensure the long-term stability.
- Accuracy of displaying and controlling 0.1ºC
Description
Model Number:
ITC-100VL — One SSR output + One Relay Alarm Output; AC12-24V;
Specification
Front Panel Dimension: DIN 48mm(W)X48mm(L)
Power Supply Voltage: AC 12-24V 50/60Hz
Operating voltage range: 85~110% Rated voltage
Power Consumption: Approx. 4VA(12~24VAC)
Character: PV: 4 digital 9.9mm height Red LED Letters
SV: 4 digital 8mm height Green LED Letters
Display Accuracy: ±0.2%FS 0.1ºC(<1000ºC);1ºC(≥1000ºC)
Period of Sampling: 0.5S
Temperature Compensation: 0-50ºC
Main Output:
Voltage Pulses Output (ITC-100V): DC 12V, 30mA;Alarm 1 AC250V 3A (Resistive load) ON/NC
Life expectancy of Relay: Mechanical≥10,000,000 operations Electrical≥10,000,000 operations
Weight: Approx. 140g
Environmental Conditions: -10~55ºC(no icy or condensation), RH 35-85% Humidity
Storage Temperature: -25~65ºC(no icy or condensation)
Data Storage: 10year Cutout size: 45x45mm
Mounting Method: Flush mounting and screw terminals
Pacakge:
1x Inkbird ITC-100VL Controller
1x Mounting bracket
1x Manual
10. Inkbird PID Temperature Controller with Relay ITC-100VH 40DA SSR K Thermocouple
Feature
- PID and ON/OFF Control Mode with high standard self-adjust function
- Multiple temperature sensors (K, S, Wre, T, E, J, B, N, CU50, PT100)
- Accuracy of displaying and controlling 0.1ºC,
- Self-adjusting function and intelligent control of the instrument to ensure the long-term stability.
- Omron relay inside
Description
Model: ITC-100VH — One SSR output + One Relay Alarm Output; AC100-240V;
Specification
Front Panel Dimension: DIN 48mm(W)X48mm(L)
Power Supply Voltage: AC 100-240V 50/60Hz
Operating voltage range: 85~110% Rated voltage
Power Consumption: Approx. 5VA(100~240VAC)
Character: PV: 4 digital 9.9mm height Red LED Letters
SV: 4 digital 8mm height Green LED Letters
Display Accuracy: ±0.2%FS 0.1ºC(<1000ºC);1ºC(≥1000ºC)
Period of Sampling: 0.5S
Temperature Compensation: 0-50ºC
Main Output: Relay Contact Output (ITC-100V): AC250V 3A (Resistive load) ON/NC.
Alarm 1 AC250V 3A (Resistive load) ON/NC.
Voltage Pulses Output (ITC-100V): DC 12V, 30mA;Alarm 1 AC250V 3A (Resistive load) ON/NC
Life expectancy of Relay: Mechanical≥10,000,000 operations Electrical≥10,000,000 operations
Weight: Approx. 140g
Environmental Conditions: -10~55ºC(no icy or condensation), RH 35-85% Humidity
Storage Temperature: -25~65ºC(no icy or condensation)
Data Storage: 10year Cutout size: 45x45mm
Mounting Method: Flush mounting and screw terminals
K-Type Thermocouple Temperature Sensing For Temperature Controller
Temperature rang :0-400 C
Sensor Dia: 4.5mm
Cable Length: 2m(6.6ft)
External Shielding: Insulated Shielding
Internal Insulation:Fiberglass
40A SSR SOLID STATE RELAY for temperature controller
Specifications:
Load Voltage: 24-380VAC
Load Current: 40A
Input Voltage: DC 3-32V
Pacakge:
1x Inkbird ITC-100VH Controller
1x 40A SSR
1x K sensor
1x Manual
Conclusion
By our suggestions above, we hope that you can found Convert Fahrenheit To Fan Oven for you.Please don’t forget to share your experience by comment in this post. Thank you!