Nowadays, there are so many products of connecting parts of kegerator in the market and you are wondering to choose a best one.You have searched for connecting parts of kegerator in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings connecting parts of kegerator which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
695 reviews analysed
1. Keg Coupler, Beer Keg Coupler, D Sankey, Sankey D, Sankey D Coupler Stainless Probe & Body, Keg Couplers With Black Handle & Hose Clamp
- ★ Stainless Steel Body ★ The Keg Coupler’s Body is made of 304 stainless steel that will not wear away over time and it will not chip like a chrome keg couple. It can improve durability and resistance to chemicals.
- ★ Stainless Steel Probe ★ The Stainless Steel Keg Coupler’s Probe is made of stainless steel that for maximum durability and sanitation, for the ultimate in purity excellent for beer, wine, and cider.
- ★ Tap For American Kegs Or Sankey Keg ★ The beer keg coupler is D – System keg taps. It fits perfectly into american kegs/sankey keg. Great sankey d coupler to replace old tap that was leaking and hard to get on.
- ★ Come With Two Tailpiece Set & Hose Clamp ★ The sankey keg coupler is G5/8 thread( U.S. Beer Industry Standard). This d coupler has a 3/8″ OD gas/beer tailpiece to fit 5/16″ ID hose.
- ★ With A Pressure Relief Valve ★ This keg coupler features a 55 PSI pressure relief valve with a food grade silicone O-ring to avoid relief valve leakage of the Keg coupler.
“D” system is the most common system available in the U.S., also known as American Sankey. It is used by all the major breweries.
How to use the beer keg coupler？
You also need a gas tank/regulator/beer faucet/hose to get the gas from the regulator to the coupler and dispense your beer. And then tap the sankey coupler to keg, pull the handle out and then down to lock
How to check whether the sankey d keg coupler leaks or not？
The best way to check is to spray it with soapy water when it is under pressure and look for bubbles.
There is a white lug under the gas in nipple that is held on by a hex nut. That prevents backflow into the regulator and also acts as a seal.
It’s possible that that hex nut is not tightened enough or that check valve is misaligned, causing a bad seal
System: D Keg Coupler
Body Material: 304 Stainless steel
Probe Material: 304 Stainless steel
Handle Color: Black
Handle Style: 304 Stainless steel – Lever
Gas Port: 3/8″ O.D. Barb (To fit 5/16″ I.D. Gas Hose)
Beer Port: 5/8″ Thread (U.S. Beer Industry Standard)
pressure relief valve: pressure relief valve releases at 55 PSI
Short handle is ideal for the smaller diameter 1/6 kegs
1* 304 Stainless Steel Keg Coupler
2. DOUBLE TAP DRAFT BEER TOWER – 2-TAP BEER COLUMN 13” HIGH 3” DIAMETER – STAINLESS STEEL BODY WITH UNIQUE BLACK SATIN FINISH – CHROME FINISH FAUCETS – BEERGON BT-1000
- TIRED OF THE SAME LOOKING BEER TOWER? BEERGON DOUBLE TAP DRAFT COLUMN is made of premium stainless steel with a unique black satin finish so you can distinguish yourself from your friend’s beer dispenser.
- YOU WISH THAT SOMETIMES YOU HAD A DIFFERENT BEER FLAVOR? NOW YOU CAN ! HAVE 2 beer FLAVORS poured from the same beer tower system at the same time ! It has high quality FDA-safe beer line (3/16” ID, 7/16” OD) that will not impart plastic flavors.
- YOU ARE WORRIED THAT IT MAY BE COMPLICATED TO INSTALL YOUR NEW TOWER? DO NOT FRET ! BEERGON DRAFT BEER TOWER IS SUPER EASY TO INSTALL on your tabletop and comes with all the hardware necessary to secure this column on your counter.
- ARE YOU CONCERNED THAT THE BEER TAPS WILL RUST? RELAX ! BEERGON BEER TAPS ARE SOLIDLY MADE and are installed and used in many bars and do not show signs of rust over many years !
- YOU THINK THAT A STANDARD 12-INCH TALL TOWER IS NOT HIGH ENOUGH FOR YOU? GOOD NEWS ! WE HAVE ADDED AN EXTRA INCH. Enjoy your 13-inch tall beer tower by pouring your beer into your extra-tall mugs !
BEERGON Beer Tower BT-1000 is made of premium stainless steel with a black satin finish so you can distinguish yourself from your friend’s beer towers. This double tap tower for your home allows you to have 2 beer flavors poured from the same tower at the same time and is equipped with a high quality FDA-safe beer lines (3/16” ID, 7/16” OD) that will not impart plastic flavors. BEERGON DRAFT BEER TOWER is super easy to install and comes with all the hardware necessary to secure this column on your counter. BEERGON BEER TAPS are solidly made and installed and used in many bars and do not show signs of rust over many years ! GET YOUR BEERGON BEER TOWER NOW, YOU DESERVE IT !
INSIDE THE PACKAGE:
One (1) beer tower cooler insulator
Two (2) faucets/taps
Two (2) tap handles (black)
Two (2) springs already inside the faucets
Two (2) 3-feet long beer lines already installed;
One (1) wrench
One (1) washer for the column base
Four (4) bolts to secure the base on the counter
Column height: 13”
Column diameter: 3”
Base diameter: 4-3/16”
Height from base to bottom of tap: 10”
Height from base to top of tap handle: 16.25”
FDA-safe beer lines (3/16” ID, 7/16” OD)
Faucet finish: Polished Chrome
Tower body color: Black satin
3. Keg Coupler, D Coupler, US Sankey Keg Coupler, MRbrew Stainless Steel Probe Heavy Duty Keg Coupler with Black Lever Handle
- ????【No Gas Leaks】This keg coupler features a 55-65 PSI pressure relief valve with a food grade silicone O-ring to avoid relief valve leakage of the Keg coupler. The keg coupler meeting all kinds of high pressure beer that needs you, this is definitely the best gift for lovers of home brewing.
- ????【Stainless Steel Probe】The d coupler is constructed of a chrome-plated forged brass body with a sanitary stainless steel probe , This solid reliable sankey coupler is capable of withstanding hard conditions of commercial environments stands up to heavy use in demanding commercial environments such has pubs, bars and restaurants.
- ????【Perfectly Beer Line Fitting】This sankey keg coupler came with a fitting for the beer line so you didn’t have to buy it separately, No more wasting time waiting, tap keg now, Cheers!!!!
- ????【Easy to Install】Connect this keg coupler to the keg, simply apply pressure and twist the black lever handle clockwise 1/2 of a turn & anyone can do it, Use this sankey coupler with your kegerator right away, start enjoying, no longer miss any game !!!
- ????【Care-free Warranty】Please feel free to contact us if any problem, we would try our best to help you solve the problem. This MRbrew US sankey coupler enjoys 45 Days Money-back, 18-month Worry-free Warranty and Friendly Customer Service.
4. Home Brew Stuff Beer Line Neoprene Coupling Washer, Set of 6
Neoprene rubber gaskets for connecting beer nut & tail piece to a shank or Keg tap. This product is manufactured in the US.
5. Kegco SH316NA-518-ASC Long Shank with Nipple Assembly 3/16" I.D. Bore, 5 1/8", Stainless Steel
- Used to Attach Beer Line to a Faucet Through Wall, Refrigerator Door, Cabinet, etc
- 9-1/8″ Long Stainless Steel Beer Shank with Nipple Assembly
- 3/16″ I.D. Beer Line Connection
- Stainless Steel Construction for durability and sanitation is ideal for cider and wine also
- Home brew Kits and accessories
This stainless steel shank is 5-1/8″ long measured from the end of the threading to the end where the faucet attaches. The shank comes with a black plastic flange on the front and a compression ring on the back. Forged brass lock nut. 3/16″ ID beer line connection.
6. Beer Line Neoprene Coupling Washer – Set of 9
7. Kegco Basic Kegerator Draft Beer Conversion Kit – BCK-NT
- CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and a highly polished chrome finish, this NSF-approved Kegco CFBL beer faucet puts a stylish finishing touch on your kegerator. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This faucet comes complete with a durable ABS plastic faucet knob with a sleek and glossy black finish.
- 4-1/8″ LONG SHANK WITH NIPPLE ASSEMBLY: The 4-1/8″ long forged brass beer shank features a black flange on the front and a compression ring on the back, making it easy to secure the shank to a mounting surface to attach beer line to your faucet. The shank comes fitted with a tail piece for connecting to 3/16″ I.D. beer line.
- 5 FOOT LENGTH OF 5/16 INCH I.D. BLUE AIR LINE: This brewery-approved thermoplastic vinyl beverage hose not only meets but exceeds all of the rigid demands for beer dispensing systems. The blue 5/16″ I.D. beer line remains flexible and durable at recommended temperatures and pressures, is unaffected by normal cleaning compounds, and will not rot, swell, or dry out.
- 5 FEET OF CLEAR BEER LINE WITH HEXNUT ASSEMBLY: This clear 5/16″ I.D. thermoplastic vinyl beer hose reliably meets all of the demands for beer dispensing systems. It remains flexible and durable at recommended temperatures and pressures, is unaffected by normal cleaning compounds, and will not rot, swell, or dry out. Included is 1 plastic snap clamp with a reusable design and a coupling assembly of 1 stepless clamp, 1 3/16″ hose nipple/tail piece, and hex nut coupling nut.
- INCLUDES METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4″ length.
8. Ball Lock MFL Keg Disconnect Set with Swivel Nuts (2 Pair) 5/16 Gas, 1/4 Liquid Barbed for Home Brew Keg Tap by the Yocen …
- The gray is used for gas (inlet) and the black is used for fluid (outlet).You need pull up a lever on this ball lock disconnect , and then push down on the correct ball lock. Gas/Liquid will flow through once connected
- Ball Lock Gas Disconnect, Grey Color, Swivel Nut with 1/4″ Barb
- Ball Lock Liquid Disconnect, Black Color, Swivel Nut with 5/16″ Barb
- High Secure: Tubing seats very tightly and will not leak!
- 1 Year Guarantee★ Place your order without any worry.If any issue happens to your order in the first 12 months, We can replace a new one for you without any fee
This is a set of two Ball Lock Home Brew Keg Connectors. This set includes both a gas in and beer out coupler that works with a ball lock Cornelius Pepsi kegs. The Gas in features a 1/4″ thread for a flare fitting. This connector already has attached the special 1/4″ nut that has a 5/16″ hose barb attached. The larger hose barb makes it connect to the same size air line that standard draft beer regulators use. Yocen aim at creating a wonderful world for home brewing，we have many products about home brewing,you can get more products in our store .we offer high quality products and service ,if you have any problem or suggestion,please don’t hesitate to tell us.Thank you so much!
9. Jansamn BF 2X-BLCP-CS-WC Disconnect MFL 1/4 Thread, Ball Lock Fittings, with Hos Keg Couplers, 4 PCS, Gray
- ★ Well Made ★ 1. The keg quick disconnect & hose clamp is made of high quality ABS plastic. And the swivel nuts is made of food grade stainless steel
- ★ Great For Ball-lock Type Fitting ★ This ball lock disconnects are designed for connecting to ball lock Cornelius (Corny) Kegs & Keg Coupler Adapter for homebrewing
- ★ Easy To Differentiate & Install ★ The gray is used for gas (inlet) and the black is used for fluid (outlet). You need pull up a lever on this ball lock disconnect , and then push down on the correct ball lock. Gas/Liquid will flow through once connected
- ★ Come With The Barbs & Hose Clamp ★ 4. The barb’s OD is 5/16″. It is fitted for 1/4″ hose. You can use the hose clamp to tighten your hose to keep good seal. The hose clamp is free
- ★ 1 Year ★ Place your order without any worry. If any issue happens to your bag in the first 12 months, We can replace a new one for you without any fee
- Included Components: Ball Lock Home Brew Keg Tap Couplers, Hose Clamps
Features> ★ The ball lock disconnect is designed to connect to a ball lock Corny keg not a pin lock keg ★ the ball lock disconnect is leak-free with Hand-Tightening and easy to use ★ before using these ball lock disconnects, you’ll want to tighten up the swivel nut connecting the flare fitting packaged> 2 * liquid ball lock disconnect 2 * Gas ball lock disconnect 4 * 5/16” barbed swivel nuts> 4 * hose clamps
10. Krome Stainless Steel 304 Tailepiece – 3/16" I.D (Pack of 25 Pieces) – C240x25
This Krome 304 Stainless Steel tail piece is for connecting 3/16″ vinyl beer line tubing to your draft beer parts. It fits inside of a hex nut and is sealed to the shank with a washer.
By our suggestions above, we hope that you can found Connecting Parts Of Kegerator for you.Please don’t forget to share your experience by comment in this post. Thank you!