Finding your suitable readers for connect a gas dryer is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for connect a gas dryer including detail information and customer reviews. Let’s find out which is your favorite one.
660 reviews analysed
1. Deflecto Easy Connecting Dryer Vent Hook Up Kit , Flexible Semi-Rigid Aluminum Duct, (HUPK8WA/4)
- 4″ diameter dryer to vent hook up kit
- Includes 2 hooker upper protectors, 1 semi-rigid aluminum duct and 1 gasket
- Duct twists on hooker upper protectors and slides over dryer vent and outlet pipe
- Protects duct from being smashed behind dryer which can cause unsafe dryer operation and longer drying times
- No clamps, no tools, no tape. Gasket may be needed for proper fit on some dryers
- Semi-rigid Aluminum Duct
- Flexible Strip Gasket
- Duct Twists On Hooker-upper Protectors & Slides Over Dryer Vent & Outlet Pipe
2. Dryer Dock Dryer Vent 6" for 4" Tubes, White
Dryer Dock Dryer Vent 6″ for 4″ Tubes, White
3. Dormont 0240892 Gas ApplianceConnectorKit 48 In. Long 5/8 In. Outlet Diameter Yellow Coated
- COMPLETE GAS RANGE INSTALL KIT: “Safety Shield” coated gas range or furnace installation kit
- LEAK TESTED GAS KIT: 5/8-Inch OD x 48-Inch length coated stainless steel gas connector
- GAS INSTALLATION KIT INCLUDES: two 1/2-Inch MIP (tapped 3/8-Inch FIP) brass adapters and one 3/4-Inch MIP (tapped 1/2-Inch FIP) adapter
- BEST GAS DRYER CONNECTOR KIT: Made in the USA. Everything you need to hook up your gas dryer
- Kit also includes one pipe thread sealant one leak test kit and one detailed installation guide
Dormont 0240892 Gas Appliance Connector Kit 48 In. Long 5/8 In. Outlet Diameter
From the Manufacturer
This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust Safety Shield coating provides extra corrosion protection from accidental contact with common household chemicals
4. Ziggurat Dryer Duct Connector with Dryer Hose | STV-M Version 2 | Laundry Dryer Snap to Vent Master Connector Kit
- QUICK AND EASY INSTALLATION – The use of this dryer hose vent snap on kit is so easy and it requires no tools. It can be put together within minutes with just your own two hands. The simplicity of this snap on hose kit is that it allows you to begin using the dryer right away. Just pre-assemble the 90 elbow, 4″ hose, and straight piece. Attach it to the dryer and the wall and it’s all set for use.
- THE BETTER CHOICE – This snap on dryer hose from ZIGGURAT provides a top-quality product for anyone in need of dryer connections. Our dryer connectors resolve the risk of potential fires, help create a better operating dryer, and don’t need to be attached by a clamp. These products are the best choice for simplicity and durability. This complete kit installs easily and works efficiently.
- BUILT TO LAST – Our STV-M snap to vent kit is designed to last a long time. With strong, yet flexible materials we have found the perfect way to create a clothes dryer connector that will get the job done for many years to come. ZIGGURAT’s dryer hose connector kit is made to be easily cleaned out and is made of quality materials to prevent crushing, ripping or other possible damage to the connection.
- TIGHT ATTACHMENT– This plastic dryer hose kit is made with soft rubber that will snugly attach to the hose you’re your dryer. The flexibility of this connector for dryer allows the pieces to fit properly together as well as hug the wall once the appliance is pushed against it. This kit is 8 x 4 x 5 inches and gives a strong connection without creating a bulky mess behind your clothes dryer.
- PRODUCTS MADE IN THE USA – The ZIGGURAT products were envisioned by a father and son who cared about safety and value. Our safe alternatives to dryer duct connectors were designed to improve household safety. We rely on quality to sell our products. All of our products are made in the USA with top-quality materials. We create household accessories that make life easier for our valued customers.
If your dryer hasn’t been doing its job and is constantly leaving your clothes wet or damp, it may be time to invest in one of our amazing connector products. At ZIGGURAT we strive to provide a safe and easy alternative for dryer accessory parts that will make sure that your dryer connections are secure and working at maximum capacity. Let this simple dryer vent duct connector kit be your next purchase. Not only does this item ensure safety with it’s easy to clean capabilities that help prevent dryer fires, but it is also built with products and materials all based in the USA to ensure top quality. The simple snap on feature of this dryer vent hose connector kit makes the installation quick and easy for everyone. There’s no need for tools of any kind or an attachment clamp. Connecting this attachment to your dryer couldn’t be easier, and our products are built to last. There will be a snug fit both to your appliance and to the wall as it grips tightly to ensure connection security. Our universal dryer connectors are made of soft rubber and other sturdy materials to make sure that no breaking, ripping, or crushing occurs when the connector is in use. This specific dryer vent connector kit is sized at 8 x 4 x 5 inches to give a great connection without extra bulk. Save yourself time and hassle with our efficient and powerful dryer wall connectors. Once you have witnessed or used one of our dryer connectors you will see why our products are the best. Make sure you get your clothes dried efficiently and safely for many years to come with ZIGGURAT products like this durable Snap to Vent Master dryer connector kit.
5. ADQ56656401 Lint Filter for LG & Kenmore Dryers by PartsBroz – Replaces Part Numbers AP4457244, 1462822, AH3531962, EA3531962 & PS3531962
- ✅ PART NUMBER ADQ56656401: It’s a high-quality exact equivalent to part numbers ADQ56656401, AP4457244, 1462822, AH3531962, EA3531962, and PS3531962.
- ✅ FOR LG & KENMORE DRYERS: The lint filter fits select dryer models made by Kenmore, Sears, and LG. Compatible model numbers include DLGX3361R, DLGX3361V, DLGX3361W, DLGX3371R, DLGX3371V, DLGX3371W, 79680512900, 79680518900, and 79681022900.
- ✅ FIXES COMMON PROBLEMS: The lint filter plays a critical role in preventing dryer vent clogs and dryer-related fires. If there’s a tear in your lint filter or it’s missing, you need to replace it.
- ✅ SIMPLE TO INSTALL: Just pop the new lint filter into place and you’re ready to go. No tools needed.
- ✅ HIGH-QUALITY DESIGN: The gray plastic filter meets or exceeds all original manufacturer specifications for performance and fit. It’s roughly 12 inches wide and 11 inches high.
6. Lambro Industries, Dryer Vent Close Elbow Kit, 4 inch. Item #4006
7. BrassCraft CSSC54-72 P 1/2-Inch FIP x 1/2-Inch MIP x 72-Inch ProCoat Gas Appliance Connector, 5/8-Inch, OD 86,000 BTU
- 5/8 In. OD with 15/16-16 Thread x 72 In. stainless steel connector w/corrosion resistant coating
- 1/2 In. FIP and 1/2 In. MIP steel gas fittings
- 86,000 BTU max flow capacity. Use with natural or LP (propane) gas
- Temperature rating: -40 to 150 Degrees F. Pressure rating: 1/2 psi maximum
- 100% leak tested. Approved for indoor and outdoor use. CSA certified
Brass Craft’s 1/2 In. FIP x 1/2 In. MIP x 72 In. Recoat Gas Appliance Connector is 5/8 In. OD (1/2 In. ID) tube with a maximum operating capacity of 86,000 BTU’s. This Recoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. Recoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the Recoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
From the Manufacturer
BrassCraft’s 1/2 In. FIP x 1/2 In. MIP x 72 In. ProCoat Gas Appliance Connector is 5/8 In. OD (1/2 In. ID) tube with a maximum operating capacity of 86,000 BTU’s. This ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
8. Whirlpool 20-48KITRC Gas Dryer Connector Kit
This is a genuine replacement part.
From the Manufacturer
Everything you need to hook up your gas dryer. Kit includes gas connector line, 3 fittings and sealant. In the State of Massachusetts, the following installation instructions apply: Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by the State of Massachusetts. If using a ball valve, it shall be a T-handle type. A flexible gas connector, when used, must not exceed 3 feet.
9. BetterVent Indoor Dryer Vent Kit – Protect Indoor Air Quality and Save Energy with a Superior Dryer Lint Filter (Electric Dryers Only)
- INDOOR DRYER VENT LINT TRAP – Double filter system captures lint and dust for healthier indoor environment. The stainless steel screen acts as a pre-filter capturing large lint particles, pet hair, etc. and can be cleaned with a sweeping motion of the hand. The polyester filter will capture the finer lint dust and can be vacuumed clean for extended use or replaced when fully loaded with lint. Compatible with electric dryers only.
- SAVE ENERGY – Clothes dry faster, saving time and energy. Savings increase in colder months by returning warm dryer air into the room.
- NO WATER NEEDED – This patented double filter system does not use water, eliminating messy cleanups.
- SAFETY ALERT FEATURE – There is a patent pending Safety Vent Flap designed to open, as a reminder to clean the screen and filter. This is a great solution for renters or homeowners concerned with dryer lines that exceed the dryer manufacturer’s recommendations, resulting in inefficient operation and lint accumulation.
- MADE IN USA – Manufactured in the United States of America. All installation hardware included.
This indoor dryer vent is designed to capture the lint from your electric clothes dryer, for those unable to vent to the outside. All types of indoor dryer vents will allow heat and humidity into the room. We recommend the user allow for air circulation and ventilation when operated in confined spaces. This patented double filter system does not use water, eliminating messy cleanups. The stainless steel screen acts as a pre-filter capturing large lint particles, pet hair, etc. and can be cleaned with a sweeping motion of the hand. The polyester filter will capture the finer lint dust and can be vacuumed clean for extended use or replaced when fully loaded with lint. Replacement filters are available in packages of 6, lasting most users up to a year under normal conditions. There is a patent pending “safety vent flap” designed to open, as a reminder to clean the screen and filter. For renters or homeowners concerned with dryer lines that exceed the dryer manufacturer’s recommendations, resulting in inefficient operation and lint accumulation, this is a great solution. Saves energy in colder months by returning warm dryer air into the room. All installation hardware included. Customer supplies hose and clamps. Installation is quick and easy, instructions included. If you’ve purchased this product in the last 30 days and one or both of the side clips is broken, please reach out to [email protected] for a replacement.
10. MagVent MV-90 Magnetic Dryer Vent Coupling
- For 90° Venting, or Vent Pipes Exiting Side Wall, Floor or Ceiling in New & Existing Construction.
- Strong Magnets Self-Align & Attach Dryer Hose to Exit Vent.
- Utilizes Zero Flame Spread, UL 2158A Approved Dryerflex Transition Hose.
- Shorter Dryer Hose & More Rigid Metal Pipe Reduces Drying Time & Utilities…It Pays For Itself!
- Easy, Solid Installs that Boost Dryer Efficiency & Safety!
The MV-90 is designed for when the vent path takes a 90 degree turn, such as down through the floor, up through the ceiling, or off to the side. -The MV-90 can handle offsets up to 3 inches from center to center. The more accurately you line up the MV-90 with the vent on the back of your dryer, the better the vent path and the further back you can locate your dryer. Normally, the MV-90 requires 5 1/2 inches of clearance behind the dryer. If an obstruction necessitates you locate the MV-90 at the maximum 3 inch offset, then your dryer will need to sit out an additional 3 inches to allow for a bend radius in the transition duct. -Close vent offsets between dryer and wall vent located on same wall as dryer (Offsets between 6-9 inches): The MV-90 can be coupled directly to a standard 4 inch diameter, adjustable, 90 degree elbow which creates a 9 inch offset. See photo below. If your same wall offset is 6 inches, you can use the MV-90 and an elbow, taking advantage of its ability to handle misalignment up to 3 inches. -Same wall offsets greater than 9 inches: Simply mount the MV-90 directly behind your dryer, plug the 90 degree elbow into the wall vent, and measure for the required length of rigid metal pipe between them. Make sure to measure from where the pipe will stop on the MV-90 to the stop on the male end of the rigid metal pipe. -Close vent offsets between dryer and wall vent located on same wall as dryer (Offsets between 0-3 inches): If your same wall offset is between 0 and 3 inches, then the MV-180 is the product for you.
By our suggestions above, we hope that you can found Connect A Gas Dryer for you.Please don’t forget to share your experience by comment in this post. Thank you!