The Best Bosch 330 Pn Ng Tankless Water Heater Natural Gas

Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 4-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room. Water Heater measures 13.75″ H x 13.75″ L x 13.5″ D and weighs 17.3 lbs. Do not operate this water heater if it is has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.

NOTE : 11Kw at 220 is equal to 13kw at 240.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 62°F and above. The ECO 18 is capable of heating over 2.5 gallons per minute, which is the equivalent of one water saver shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62°F, and an output setting of 105° F. Two showers emitting no more than 1.5 gpm each can be run simultaneously when incoming water temperature is above 70° F. Digital temperature control allows you to set your temperature in increments of 1°. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. However, when sized properly it will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 18 requires a minimum 150 amp electrical panel for installation with (2) 40 amp double pole breakers connected to (2) sets of #8 awg wire. Plumbing connections are 3/4″ NPT. For additional assistance please feel free to contact our support center at 877-474-6473.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 62 Degree F and above. The ECO 18 is capable of heating over 2.5-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62 Degree F. Two showers can be run simultaneously when incoming water temperature is above 70 Degree F in warmer climates such as South Texas, South Florida, New Mexico, Arizona and South California. These models come with a digital temperature control that allows you to set your temperature in increments of 1 Degree. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

Professional classic® tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications

The 220V ECO180 unit by Marey provides 18kW of power, being the perfect solution for multiple points of use in the southern areas of the US (up to 3 points of use simultaneously in such locations). This unit provides 31°F increase at 4.4 GPM, allowing you to have multiple points of use running simultaneously in hot climates. If you live in colder regions, this unit can reach up to 80°F at 1.5GPM for hot water output at one point of use at time. Marey´s ECO180 is ETL approved and recommended for the whole US territory. This unit must be installed no more than 40 feet from the intended point of use and it must be installed by a professional as its electrical requirements demand (2) 50 Amp breakers. ECO180 has no need for pre-heating as it provides instant hot water on demand. It is activated by water pressure (5 to 85 PSI) from the moment the faucet is opened. The complete ECO line by Marey is the only one in the market with a corrosion resistant patented heating element which reduces hard water build up from chlorine and calcium.

Cameron Sino are made to the exact specifications as same as the original battery.
Each battery is equipped with over charge, over discharge, over voltage and short circuit protection functions to ensure longer battery life.

Compatiable battery model list:
3300K,
3305K,
330K,
3310K,
3315K

Replacement battery Part Number list:
2 607 335 054, 2 607 335 055, 2 607 335 071, 2 607 335 081, 2 607 335 107, 2 607 335 108, 2 607 335 143, 2 607 335 145, 2 607 335 148, 2 607 335 151, 2 607 335 172, 2 607 335 185, 2 607 335 243, 2 607 335 244, 2 607 335 250, 2 607 335 376, 2 607 335 378, 2 607 335 471, 2 610 910 405, 2607335090, 261091405, BAT011, BH1214H, BH1214L, BH1214MH, H1214N

Parameters:
Capacity: 3000mAh / 36.00Wh
Volts: 12V
Type: Ni-MH
Dimension: 108.91 x 53.34 x 114.24mm
Please use CTRL+F to find your model/part number printed on your Bosch Power Tools bottom or original battery
If you have any questions about the battery, please contact us.

This product is an original febi bilstein product.

febi bilstein stands for solutions “Made in Germany” and is one of the world’s leading manufacturers and suppliers of spare parts for passenger cars and commercial vehicles in the independent aftermarket. For over 170 years the brand has stood for continuity, quality, service, reliability and innovation

Please use the vehicle identification at the top of the page to confirm compatibility with your vehicle. All restrictions must be observed!

The febi bilstein product range offers the right spare parts in convincing original equipment quality for all common vehicle types. With more than 37,000 spare parts in our range, febi bilstein has exactly the part you need.

Before carrying out repairs on your vehicle, please be sure to observe the vehicle manufacturer’s instructions.

All work should only be carried out by qualified vehicle technician.

This product is an original febi bilstein product.

febi bilstein stands for solutions “Made in Germany” and is one of the world’s leading manufacturers and suppliers of spare parts for passenger cars and commercial vehicles in the independent aftermarket. For over 170 years the brand has stood for continuity, quality, service, reliability and innovation

Please use the vehicle identification at the top of the page to confirm compatibility with your vehicle. All restrictions must be observed!

The febi bilstein product range offers the right spare parts in convincing original equipment quality for all common vehicle types. With more than 37,000 spare parts in our range, febi bilstein has exactly the part you need.

Before carrying out repairs on your vehicle, please be sure to observe the vehicle manufacturer’s instructions.

All work should only be carried out by qualified vehicle technician.