Top 10 Black Max 2700 Psi Gas Pressure Washer Reviews

In some instances, the pump may need to be removed to change engine oil. 

Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. 

These bolts and spacers are not included, but may be purchased at your local hardware store.  

Common bolt sizes: Two – 5/16″ 18 x 2 1/2″ , One – 5/16″ 18 x 3 1/2″

PARTS COMPATIBILITY:

Specific models stated in the listing are potential matches only and NOT a guarantee of compatibility.

(Even if two pieces of equipment share the same year/make/model, they can and often do have different part numbers).

The only way to ensure the correct replacement is with the OEM part number. The customer is responsible for verifying their OEM part number.

It is the customers responsibility to make sure that this is the correct item/part for their unit. If you are unsure if this is the correct item/part, please contact The ROP Shop, we would be more than happy to help you.

NEW HIGH PRESSURE HOSE 

For use with most gasoline pressure washers up to 3200 PSI Honda, Generac, Ryobi, Powerstroke etc. (Cold water use only)

This is a 25ft hose rated at 3200 PSI with M22 connectors for the High pressure gun and to the pump.

HOSE

Length (ft): 25 (ft

Diameter (in/mm): 0.25″ / 6

Max. Working Pressure (PSI): 3200

Connectors: M22

YOU GET FULL CUSTOMER SUPPORT TO ADVICE YOU ON ANYTHING YOU MIGHT NEED!

Please check your specifications before making the purchase.

The PowerBoss 3100 PSI pressure washer is built for the hardworking, DIY homeowner looking to get the job done effectively and efficiently. A durable Honda GC190 engine is ideal for medium duty use at home or on the job site, while a maintenance free axial cam pump with Easy Start technology provides easy, low effort starting. Included with the unit are 4 quick connect spray tips for precise cleaning control. The 0 Degree spray tip has a concentrated spray for stain removal and for second stories. The 15 Degree spray tip is great for cleaning surfaces such as concrete, asphalt, vinyl siding and hard woods. The 40 Degree spray tip has a wide fan spray for cleaning delicate surfaces such as cars, boats, and soft woods. The low pressure soap spray tip should be used for applying cleaning detergents. A 1 gallon onboard detergent tank, 10 pneumatic wheels and 25 foot high pressure hose make outdoor cleaning even faster and easier.

2400-2700 PSI, Flow Rating of 2.4 GPM, with 7/8″ and 3 mounting holes. INCLUDES THERMAL RELEASE VALVE. SPECS: FITS 7/8″ Inch (22.225mm) SHAFT VERTICAL CRANK ENGINES. MOUNTING BOLTS: FROM MAIN CENTER SHAFT TO EACH MOUNT BOLT IS 4″ – CENTER TO CENTER SPACING BETWEEN MOUNTING BOLTS IS: 7 11/16″ – 6 3/16″ – 6 7/16″

Power. Performance. Versatility. The Pressure Joe SPX3000 electric pressure washer delivers it all to tackle a variety of cleaning tasks: homes, buildings, RV’s, cars, trucks, boats, decks, driveways, patios, lawn equipment and more. Packed with an 1800-Watt/14.5-amp motor, the Pressure Joe SPX 3000 generates up to 2030 PSI of water pressure and 1.76 GPM of water flow for maximum cleaning power. Remove tar and grease from concrete, heavy mildew stains, oil stains, rust from steel, caked mud on equipment, and other stubborn gunk and grime. Equipped with a dual detergent tank system the Pressure Joe SPX3000 carries and stores two different types of detergent simultaneously in its two .9L onboard removable detergent tanks. Conveniently switch between different detergents with its detergent selection dial and blast away all sorts of grime. Its 34-inch extension spray wand and rear wheels provide easy maneuverability and access to hard-to-reach areas such as 2 story buildings and the undersides of the automotive vehicles and lawn equipment. Tailor the pressure output of the spray to your cleaning needs with Pressure Joe’s five quick spray nozzles. Other features include: 20 foot high pressure hose, 35 foot power cord, garden hose adaptor, and a TSS (Total Stop System) trigger that automatically shuts off the pump when the trigger is not engaged. Voltage 120 V ~ 60 Hz

MorFlex technology is used for high flexibility and kink resistance, lightweight polyester braid for easy handling. The MorFlex hose is equipped with threaded fittings with dual o-ring design to fit both 14mm and 15mm connections and includes a 14/15mm threaded hose connector. Polyurethane outer jacket is non-marring, abrasion resistant, and designed to fit most gas pressure washers with standard threaded connections. Up to 140°F maximum temperature, these are used as original hose replacement or an extension of an existing hose . 90 Day limited accessory

7/8″ Shaft, Aluminum Head, Vertical Pump replacement for Pressure Washer with 2800 PSI and 2.3 GPM, includes Keyway

Please review all product information to ensure that this product is compatible with your unit.

A Message to the Customer

The ROP Shop staff constantly strives to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for:

• Model
• Spec and/or Type Number
• Code and/or Serial Number
• Year

Our knowledgeable product specialists are always willing to help you verify product fitment. Stay rugged, my friend.

-The ROP Shop Staff