Finding your suitable readers for automobile alfa romeo mito is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for automobile alfa romeo mito including detail information and customer reviews. Let’s find out which is your favorite one.
792 reviews analysed
1. Royalfox(TM) Luxury Aircraft Aluminum Smart 3 Buttons car Key Fob case Cover for Alfa Romeo Giulia Stelvio 4c Mito Giulietta 2017+ (red)
Feature
- Please compare the pictures with your key before purchase. Just the cover, key fob is NOT included.
- Compatible Models: Alfa Romeo Giulia Stelvio 4c Mito Giulietta 2017 2018 etc.
- PRECISE FITMENT: The key fob cover with professional and perfect design enable you to easy control all the buttons and connectors.
- Luxury Aircraft Aluminum Material & Easy Installation: Key fob cover is made of premium Luxury Aircraft Aluminum, which is the ultimate protection against scratches, scuffs and cracks. It is easy to install this key fob cover.
- EASY INSTALLATION: We enclose some screws and tool with key fob cover. It is easy to install this key fob cover.
Description
Compatible Models: Alfa Romeo Giulia Stelvio 4c Mito Giulietta 2017 2018, etc.;
2. HD 720p Rear View Back Up Reverse Parking Camera in License Plate Waterproof Night Version (NTSC) for Alfa Romeo MiTo AR Furiosa Fiat Alfa Romeo 156/159 / 166/147 / Alfa Romeo Stelvio Spider Giu
Feature
- Rear Backup Parking Camera Suitable for Alfa Romeo MiTo AR Furiosa Fiat Alfa Romeo 156 / 159 / 166 / 147 / Alfa Romeo Stelvio Spider Giulietta 940
- High quality reversing camera that simply replaces one of your original license plate to give a factory installed look with outstanding picture quality.
- This Backup camera match to all monitors with RCA connector and DVD navigator. An upgraded 12V voltage range ensures a stable data transmission and eliminates screen flashing & blank screen problems .If you would like to install an aftermarket camera we suggest buying an interface or an adapter, which also allow you to connect additional video sources to your car OEM monitor.
- Simple to Install (see steps below) – No drilling, only DIY skills to fit . Just Route the cable from tailgate or license plate to front dash, connect to display with universal RCA connector, you may need additional interface adapter (not included) if to connect factory radio .
- Remark:This camera do not work well with original factory display/monitor, will work well with aftermarket display/monitor .Please check the dimension for fitting to your number plate light recess before purchasing
Description
Car Reversing Backup Parking License Plate Rear View Camera Night Vision Camera
Note:
1.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.
2.Please allow 0.5-1 inch difference due to manual measurement.
3.Although instruction is included.Professional Installation Is Highly Recommended!
4.Please Compare The Rear view Backup Camera With Your Original license plate or trunk handle Before Purchasing！
This product could fit for all below models as expected:
Alfa Romeo Stelvio 2016 2017 2018
Alfa Romeo Brera 2005~2010
Alfa Romeo Spider (916) 1995~2006, (939E) 2006~2010
Alfa Romeo Giulietta 940 2010~2018/
Squadra Corse TCT 2015~2018
Alfa Romeo 156 Benzina 1997~2002
Alfa Romeo 159 from 2005~
Alfa Romeo 166 Bz-Ds from 1998~2007
Alfa Romeo 147 Bz/Ds from 2000~
Alfa Romeo Nuovo Spider from 2006~
Specification:
-Color: Black or White
-Camera Model: RVC-Cam 6
-Compatible Vehicle Make: Universal
-Camera Connection Type: Wired
-Resolution: 720 TVL
-Image device:1/3 inch CCD color image sensor.
-TV system: NTSC
-Minimum illumination: 0.3Lux/F1.2
-Lens: 3.6mm/2.8mm/1.8mm
-Power Consumption: 250mA
-Power Supply: DC 12V
-Video Output: RCA connector
-Viewing angle: 150-170 Degree
-Operating temperature:-22 to 122 degrees centigrade Rh95%
Package Contents
1 x Super HD Pro Car Rear view Camera
1 x Power Cable (1.5m/4.9ft)
1 x AV Cable (6m/19ft)
1 x User Manual
3. changlaiwang Silicone Case Key Cover Fob Fit for Alfa Romeo Mito Giulietta 159 GTA Car Remote Rubber Jacket Bag Practical Decoration
Description
description:Suitable for: for For Alfa Romeo Mito Giulietta 159 GTA
Specification:
Condition: 100% Brand New
Buttons: 3 Buttons
material: silicone
Package Includes:
1X Silicone Key Case (remote key is not included)
Changlaiwang is a professional auto parts store. We have a professional processing factory that can customize seat covers, floor mats, trunk mats, center console armrest boxes, Dash Covers, stickers and other auto parts for 98% of cars. If necessary, you can contact us for customization
4. RoyalFox 3 Buttons Genuine Leather flip Folding Remote Key Fob case Cover Keychain for Alfa Romeo Mito Giulietta Brera 4C 159 GTA
Feature
- Please kindly refer to the SECOND GALLERY IMAGE before order ,because these covers only fit for Mazda ENGINE START STOP SYSTEM Smart Keyless entry remote key. Just the cover, key fob is NOT included.
- Compatible Models:fit for Alfa Romeo Mito Giulietta Brera 4C 159 GTA
- PRECISE FITMENT: The key fob cover with professional and perfect design enable you to easy control all the buttons and connectors.
- Genuine Leather Material & Easy Installation: Key fob cover is made of premium genuine leather, which is the ultimate protection against scratches, scuffs and cracks. It is easy to install this key fob cover.
- Please make sure to buy the right case for your key.
5. Black 2pcs Snake Emblem Decal Sticker for Alfa Romeo 146 147 155 156 159 Stelvio Giulia Giulietta Mito GT
Description
Beautiful design , to improve your taste
Design according to the original size, to make your car own more original characteristic
Lengthened screws, lengthened shims, which can effectively prevent being unfixed
Never fade ,has water proof, oil proof and washing liquid proof functions
Easy to install, stylish car badge will make your car more charming!
6. KRADA Car Door Logo Light LED Projector Ghost Shadow Welcome Lights for Alfa Romeo Giulietta/Mito/Stelvio/Giul Series Symbol Emblem Courtesy Step Lights Kit Replacement (2 Pack)
Feature
- Compatibility for Alfa: Alfa Romeo Giulietta (2011 — 2018)
- Mito (2009 — 2018)
- Stelvio (2017 — 2018)
- Giulia (2017 — 2018)
- 159 (2004 — 2012)
- Brera (2005 — 2010)
- Spider (2006 — 2010). Detailed compatible car models please refer to the description page. And please make sure your car has original door lights before purchase.
- HIGH DEFINITION and BRIGHT PROJECTION: HD projection,using high brightness LED chips, very bright lighting output, and very low power consumption,the film projection can be replaced optionally
- Super cool Car Door LED logo projection for Alfa. When the door is opened, the Alfa LOGO is illuminated onto the open door surface to provide a light to aid entry into and out of the vehicle.
- Easy to install–Direct Replacement.No modifications required.No wire cutting.Install this door lamp to bring you a warm and romantic atmosphere in the dark night.
- Customer guarantee: The item is covered by 30-day money back guarantee and 1-year replacement warranty with lifetime supportable and prompt customer service.
Description
The Relentless Pursuit of perfection Alfa
Set yourself apart from the crowd with a WFB Car Door Projector that reflects your tastes and passions. Be prepared to get tons of compliments every time you take it out with you!
Features :
1. Direct replacement.No modifications required.No wire cutting. No error or warning on dashboard.
2 . Never used or tried on , Simple installation.Can be done in 5 minutes
3. Voltage:12V with 2000L.
Compatibility: (Only for Alfa Romeo)
Alfa Romeo Giulietta (2011 — 2018);
Alfa Romeo Mito (2009 — 2018);
Alfa Romeo Stelvio (2017 — 2018);
Alfa Romeo Giulia (2017 — 2018);
Alfa Romeo 159 (2004 — 2012);
Alfa Romeo Brera (2005 — 2010);
Alfa Romeo Spider (2006 — 2010);
Installation Instructions:
1. Use A Flathead Screwdriver Or Installation Tool To Remove And Disconnect Original Door Step Lights .
2. Plug In new Door Lights With Correspondent Connector.
3. Put new Door Lights To The Spot Where Your Original Step Lights Were.
4. Alfa Logo Should Be Projecting On To The Ground.
Package Include:
2 pieces Alfa welcome light
7. Ceyes Silver Start Engine Stop Cover Emblem Push Start Button Cover Trim Ignition Start Stop Button Badge Ignition Switch Button Cover Sticker for Alfa Romeo Giulietta Stelvio Mito 147 156 159 166
Feature
- 1. Attention: ① pls firstly compare the size and shape as the pictures shown with the start engine stop button of your car before purchasing
- ② when sticking, pls make sure the sticker is sticked on the Correct / Center position of car ignition start stop button, then start and stop you car for 3-5 times to make sure all are ok after installation
- 2. Fit For Alfa Romeo Giulietta Stelvio Mito 147 156 159 166
- 3. Easy to instal, no need to disassemble the car engine start stop button, just stick it on the auto push button switch
- Strong viscosity, not easy to fall off, prevent the ignition start button from scratches and abrasions
- No residue and no damage to your car
- 4. Color brilliant and optional, personalize select bring you unique visual experience, and make your car more cool than before
- 5. Package: 1 × Car Start Engine Stop Button Cover
Description
Warm tips:
Pls firstly compare the size and shape as the pictures shown with the push start button of your car before purchasing;
If you are still not sure, please kindly contact us firstly, thank you!!!
When sticking, pls make sure the sticker is sticked on the Correct / Center position of car engine start stop button,
then start and stop you car for 3-5 times to make sure all is ok after installation
Do not wash your car within 24 hours after installed
You can also use the hair dryer to warm up the 3M adhesive tape before instal to make the item stick tightly
Features:
– Color brilliant and optional, personalize selection bring you unique visual experience, and makes your car looking more cool than before
– Easy to instal, no need to disassemble the car engine start stop button, just stick it on the button
– Strong viscosity, not easy to fall off, prevent the push button from scratches and abrasions
– No residue and no damaging to your car
Installation:
1) keep the surface clean and dry before installation
2) tear the adhesive tape off and stick onto the right position slowly
3) press it slightly for 1-2 minutes
Compatible Vehicles:
Fit For Alfa Romeo Giulietta Stelvio Mito 147 156 159 166
Car Engine Start Stop Button Cover
Color: Silver
Material: Aluminum Alloy
Cover Size: Diameter: 2.2cm/0.87inch
Instal location: Car Engine Start Stop Button
Package:
1 × Car Engine Start Stop Button Cover
8. Vitodeco Genuine Leather Smart Key Fob Case Cover Protector with Leather Key Chain for 2017-2019 Alfa Romeo Giulia, Stelvio, 4C Spider (5-Button, Red)
Feature
- Suitable for 2017 – 2019 Alfa Romeo 5-Button Smart Key Fob. Please compare the picture with your key fob before purchase.
- This case made from 100% genuine premium cowhide leather. Provide full protection from scratch and wear-out for your key.
- All buttons, ports, sensors remain unrestricted without compromising on protection. This case is designed for everyday use.
- Easy to install, instantly improve the appearance of your old or dirty remote control smart key fob.
- Package Included: 1 X Leather Key Case, and 1 X Key Chain. (Note: Key Fob not included)
9. Car Door Light Welcome Projector Ghost Shadow Light For Alfa Romeo Stelvio Mito Giulietta Giulia Brera 2 Pack
Feature
- Installation instructions -1 No drilling, no wiring, . Easy to install,It will only take you about 5 minutes
- Compatibility for Alfa: Alfa Romeo Giulietta (2011 — 2018)
- Mito (2009 — 2018)
- Stelvio (2017 — 2018)
- Giulia (2017 — 2018)
- 159 (2004 — 2012)
- Brera (2005 — 2010)
- Spider (2006 — 2010). Detailed compatible car models please refer to the description page. And please make sure your car has original door lights before purchase.
- 100% Brand new, Cree LED pure white, Voltage:12V with 1800L
- High Definition and Bright Projection.Using high brightness LED chip,Very bright lighting output,Very low power consumption.
- ustomer guarantee: The item is covered by 30-day money back guarantee and 1-year replacement warranty with lifetime supportable and prompt customer service
Description
Compatibility: (Only for Alfa Romeo)
Alfa Romeo Giulietta (2011 — 2018);
Alfa Romeo Mito (2009 — 2018);
Alfa Romeo Stelvio (2017 — 2018);
Alfa Romeo Giulia (2017 — 2018);
Alfa Romeo 159 (2004 — 2012);
Alfa Romeo Brera (2005 — 2010);
Alfa Romeo Spider (2006 — 2010);
Installation Instructions: 1. Use A Flathead Screwdriver Or Installation Tool To Remove And Disconnect Original Door Step Lights .
2. Plug In new Door Lights With Correspondent Connector. 3. Put new Door Lights To The Spot Where Your Original Step Lights Were.
4. Alfa Logo Should Be Projecting On To The Ground.
Package Include:
2 pieces Alfa welcome light
Conclusion
By our suggestions above, we hope that you can found Automobile Alfa Romeo Mito for you.Please don’t forget to share your experience by comment in this post. Thank you!
