We spent many hours on research to finding ao smith water heater anode rod type, reading product features, product specifications for this guide. For those of you who wish to the best ao smith water heater anode rod type, you should not miss this article. ao smith water heater anode rod type coming in a variety of types but also different price range. The following is the top 9 ao smith water heater anode rod type by our suggestions
814 reviews analysed
1. About Fluid | Magnesium Flexible Anode Rod Kit for Water Heaters | Teflon Tape | Easy-to-Follow, Step-by-Step Instructions | 44 Inches Long. (Without Socket and Cap)
Feature
- Easy-To-Install, Magnesium Anode Rod With Teflon Tape And Step-By-Step Instructions (Without Socket And Cap)
- FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you.
- You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw.
Description
ONE SIZE FITS MOST.Almost all water heaters including; Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. Most water heaters use this HEX TYPE (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode. A few water heaters do use a “hot-water-outlet type” where the anode is part of the outlet piping. (You may want to check first.)
. SAVE YOUR TANK AND SAVE $. Magnesium is the best anode rod material used to protect your water heater. This Magnesium sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
. INSTALL IN SMALL SPACES. The About Fluid flexible hinged design allows you to install the anode rod in any location, requiring only twelve inches of overhead clearance.
2. About Fluid Aluminum/Zinc Flexible Anode Rod Kit For Water Heaters | Includes Full Roll Of Teflon Tape | Easy-To-Follow Step-By-Step Instructions | (WITHOUT Cap) (WITHOUT Socket)
Feature
- GET RID OF THE EMBARRASSING ROTTEN EGG SMELL IN YOUR HOME with our Aluminum / Zinc Anode Rod! Did you know that the magnesium anode rod inside your hot water tank is the number one key contributor to the production of your smelly, hydrogen sulfide gas? About Fluid solved this problem by creating a flexible anode rod made from an Aluminum/ Zinc Alloy, instead of magnesium. This unique alloy works everyday, killing the bacteria responsible for the sulfur and rotten egg smelling gas.
- FITS: Almost all water heaters including: Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape will leave you with plenty left over for the next time you check your anode rod’s condition.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw or similar tool.
- CHANGE THE ANODE ROD, NOT THE WATER HEATER.The anode rod in your water heater is designed to decay instead of your Water’s Heater Tank itself. Eventually, the anode rod is completely consumed (usually just before your water heater warranty is up) and the Water Heater Tank begins to decay and ultimately rusts,fails,cracks and leaks. This is why maintaining the anode rod (by checking and or replacing every 2 years) in your water heater insures the anode rod decays, and not your water heater!
Description
YOU’VE GOT THIS!
WE’LL WALK YOU THROUGH EACH EASY STEP.
1. WIN THE WAR ON SMELLY WATER!
Never have to explain that smell again!
2. ELIMINATE HYDROGEN SULFIDE GAS. Just replace your existing magnesium anode rod with the About Fluid Aluminum/Zinc rod and eliminate that rotten-egg-smelling, hydrogen sulfide gas, in your hot water.
3. EASY-TO-FOLLOW, STEP-BY-STEP INSTRUCTIONS.Do It Yourself Instructions, written by plumbers and translated for everyday problem solvers like you!
4. NO LEAKS! We include a full-roll of Teflon Tape to ensure you will not have leaks and will have, plenty left-over for next time.
5. ONE SIZE FITS MOST. Most water heaters including: Rheem, Reliance, Richmond, Kenmore, State and GE, AO Smith and many more that use this “HEX TYPE” (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode.
6. SAVE YOUR TANK AND SAVE $. This sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
7. INSTALL IN SMALL SPACES. The About Fluid flexible hinged design allows you to install the anode rod in any location with about a foot of overhead clearance.
8. RUGGED CONSTRUCTION. Anode Rod Segments are connected with 100 percent, 316 Stainless Steel Aircraft Cable and connectors that will never rust, corrode or break.
3. Aluminum Zinc Hex Head Flexible Anode Rod (.800" x 3/4" x 44") – Stops Rotten Egg Smelly Water! …
Feature
- Sacrificial anode rod for water heater tank made from aluminum-zinc alloy cures rotten egg (sulfur) smell in hot water.
- Replaces water heater tank’s existing magnesium anode rod (hex head only).
- Eliminates rotten egg smell in hot water caused by hydrogen sulfide gas (H2S) and extends service life of water heater tank.
- Segmented flexible design for easy installation
- can be cut to length to fit different size heaters.
- Not recommended when water softener is in use (use a powered anode/cathode instead).
4. Blue Lightning 79098 Residental Magnesium Flexible Anode Rod, Hex Plug, 44-Inch
5. Water Heater Anode Rod Flexible Segmented- Kit with Magnesium 44" Anode Rod, 1-1/16" Socket, Teflon Tape, Instructions – for 30-80 Gallon Tanks
Feature
- Want AN EVEN BETTER ANODE? Try our: https://amzn.to/39r6Ibd
- Water Heater Anode Rod Flexible Design Fits gas and electric water heater sizes 30-80 gallons, and allows for installation with clearance of 10” above water heater.
- PRE-APPLIED THREAD SEALANT ensures NASA-grade watertight seal under high heat and high pressure (no clogged plumbing due to shredded teflon tape!) We still include teflon tape in case you are skeptical! NSF 61-approved.
- HIGH PURITY MAGNESIUM Water Heater Anode: An essential element for the body, provides superior protection to your water heater.
- 1-1/16″ TRI-DRIVE SOCKET SAVES YOU MONEY! You can use 1/2″, 3/4″, or 1″ square drives with the socket, eliminating the need to purchase adapters or socket sets. Often the old anode requires use of an impact driver to remove, and this socket has you covered!
Description
The STOLTCO flexible magnesium anode kit is the perfect solution for home anode replacement. It includes a patent-pending socket which allows use of multiple size square-drive inputs (including 3/4″ and 1″ pneumatic) which makes the job fast, easy, and cost-effective for you! Pre-applied thread-sealant eliminates the need to use teflon tape, although we include the tape for the skeptics out there. Don’t want this great-value kit? –please see our other products, as we sell just the anode as well. Thanks!!
6. Powered Anode Rod System 100305721 for A.O. Smith, Reliance, State, American, Whirlpool, and Craftmaster Branded Hot Water Heaters Up to 50 gallons
Feature
- The Product Preservers Powered Anode System uses patented adaptive technology that quickly adjusts to your water type providing the precise amount of current needed to deliver the best protection for your water heater tank
- Consistent protection is paramount in maintaining the integrity of the steel water heater tank. Built-in LED fault light and audible alarm provides peace of mind knowing the system is working properly
- Installation is made easy for professionals with a small control box that can plug into any standard 120 volt wall outlet
- Eliminates smelly water issues caused by sacrificial magnesium anodes
- Great for softened water applications
7. Blue Lightning 79099 Residental Magnesium Flexible Anode Rod, Nipple Fitting, 44-Inch
Description
Blue Lightning magnesium flexible anode rod, nipple fitting, 44-inch ( four sections) our new innovative 79099 of anode rod fits into any tight spot you may find yourself faced with. This anode rod is also made from magnesium rather than aluminum to ensure that you avoid any potential unhealthy side effects from aluminum by-products. Magnesium can actually improve your health by aiding in blood and heart disorders. It is also useful in lowering anxiety, relieving menstrual cramps, counter acting adhd, strengthening bones, and a long list of other advantages. Unless you want to replace your entire water heater you are going to have to replace your anode rod at one point or another. Blue Lightning anode rods provide you with the best solution to your needs by providing a reliable product that ensures optimal water quality.
8. Osring 44 Inch Flexible Water Heater Anode Rod 3/4 Inch NPT Thread, Magnesium Anode Bar with Hex Head for Water Heater, Triple Defense Against Water Odor, Inner-Wall Rust and Corrosion
Feature
- Made from high-quality magnesium alloy, anode rod for Water heater is greatly protecting your water heater against deterioration.
- Magnesium anode rod produces so strong current that more effective in protecting water tank from corroding than aluminum alloy anode rod.
- 44” anode rod is hinged into four parts(each part is 9-1/2” long) and flexible enough to be replaced easily in a narrow space. Just safely cut it shorter with a hacksaw.
- Aluminum-zinc hex plug anode rod with 4/5” diameter has standard 3/4” NPT thread connection, compatible with Kenmore, Reliance and Richmond power water heater.
- Anode bar rod is expected to provide about two years of corrosion protection, greatly increasing the life of water heater as long as you replace the anode rod regularly.
9. Magnesium Flexible Water Heater Anode Rod- Magnesium Anode Rod for Hot Water Heaters, 44 Inch Long, 0.8 Inch Diameter, 3/4 Npt Thread, Including 1-1/16 Inch Hex Socket Tool and Teflon Tape
Feature
- MAGNESIUM ANODE ROD-LONG LASTING USE: This heater anode rod is made of high-quality magnesium that is specifically designed to provide long-lasting use and collect contaminants from water hearts.
- EXTEND SERVICE LIFE OF WATER HEATER: Hot water tanks are made of steel which is very corrosive when exposed to water. Based on the electromotive series of metals we know that magnesium will corrode before the steel in your hot water tank. In this way, it can extend the service life of your water heater.
- ADVANTAGES OF MAGNESIUM ANODE RODS COMPARED TO ALUMINUM RODS: The metallic activity of Magnesium anode rod is stronger than that of Aluminum anode rod. That means Magnesium anode rod is more effective at keeping the water tank from corroding.
- FLEXIBLE DESIGN FOR TIGHT AREAS: This 44 Inch-long magnesium rod is hinged into four segments, less than 12 Inches long each, so it is easy to place it into the tight areas of water heaters.
- KIT INCLUDED: 1) 44 Inch-long magnesium rod, 3/4 NPT Thread makes it compatible with most water heater. 2) 1-1/16″ Hex Socket Tool , help you to replace the anode rod. 3) Teflon Sealing Tape
Description
magnesium anode rod for water heater
Analyzing from a Chemical Perspective, magnesium is more active than aluminum and zinc, so magnesium is more suitable as an anode to protect your water heater.
Besides, Magnesium ions won’t cause any harm to your skin.
Parameters:
Length: 44 inches/ 1100mm
Diameter: 0.8″ /21mm
3/4″NPT thread
Net Weight of the anode rod: 660g
Material: Magnesium
Application:magnesium anode rod for water heater
Packaging List:
Magnesium Anode Rod * 1
1-1/16″ Hex Socket Tool *1
Teflon Sealing Tape * 1 roll
Conclusion
By our suggestions above, we hope that you can found Ao Smith Water Heater Anode Rod Type for you.Please don’t forget to share your experience by comment in this post. Thank you!