Nowadays, there are so many products of ao smith warranty for water tank in the market and you are wondering to choose a best one.You have searched for ao smith warranty for water tank in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ao smith warranty for water tank which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
815 reviews analysed
1. Rinnai RL Series HE+ Tankless Hot Water Heater: Indoor Installation
Feature
- Endless hot water for your entire home
- RL75iN HE+ High Efficiency Tankless Hot Water Heater – Natural Gas: Indoor Installation Only
- Up to 7.5 GPM hot water flow rate (varies by groundwater temp)
- Circ-Logic technology allows you to set recirculation patterns that coincide with your typical habits. Hot water is available when you need it!
- Residential Factory Warranty – 120 months (heat exchanger), 12 months (labor), 60 months (parts)
Description
Product Description
non-Condensing Tankless Water Heater
From the Manufacturer
Stop planning your mornings and evenings around your water heater. Set your own schedule, thanks to the R75LSi. Ideal for two- to three-bathroom homes, the R75LSi delivers up to 7.5 gallons of hot water per minute (GPM), while saving energy and money. Mount your compact R75LSi in virtually any room, and vent directly to the outside with a single wall or roof penetration.
2. Rinnai RUC98iN Ultra Series Natural Gas Tankless Water Heater, Twin Pipe
Description
Rinnai takes tankless water heating one step further with condensing technology that delivers more efficiency than ever before. Enjoy all the same tankless benefits you’ve come to expect from Rinnai, plus even greater energy savings. Features: 95% Thermal Efficiency Natural gas or propane Indoor Installation Only 98° F to 140° F Residential Temperature Range 98° F to 185° F Commercial Temperature Range Commercial Controller Must be Purchased Separately Gas Rate Input BTU’s: 15,200 – 199,000 Electronic Ignition Meets California and Texas NOx Emissions Standards Compatible with Full Line of Rinnai Digital Controllers 12-Year Warranty on Heat Exchanger, 5 Year Parts, 1 Year Labor for Residential Installations Specifications: Width: 18.5″ Height: 26″ Depth: 10″ Weight: 61.7 lbs Gas Connection: 3/4″ Water Connection: 3/4″
3. Bosch Electric Mini-Tank Water Heater Tronic 3000 T 7-Gallon (ES8)- Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
Feature
- CONVENIENT HOT WATER HEATER: 7 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 17.5 W x 17.5 H x 14.5 D Inches
- INSTALLED VERTICALLY OR HORIZONTALLY: This larger model can be mounted vertically (7 gal. of water supply) or horizontally (5.1 gal. of water supply)- vertical orientation is installed with the cold and hot lines on top of the unit
- RELIABLE WATER SOURCE: Easily hard-wire the 7-gallon model to provide the on-demand reliable water source your home or office needs
- IMPORTANT INFORMATION: Heating capacity of 1440 watts and a temperature range of 65-145°F max. Operating pressure-150 psi. Water fittings-3/4 inch Male NPT. Electrical requirements (Amp 12A/Volts 120)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included for vertical orientation only)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
Description
120V – requires hard wiring. 1440W element. Magnesium anode rod. Rectangular shape with 2″ of foam insulation. Glass lined tank for longer life. 6 year warranty on heater and 1 year warranty on parts for both commercial and residential use. Temperature/pressure relief valve included. Can be mounted both horizontally or vertically. Mounts on floor or wall. Meets ASHRAE 90.1. See Info Page for technical and installation specifications.
4. American Standard CE-6-AS 6 gallon Point of Use Electric Water Heater
Feature
- Heavy gauge Steel tank
- Inner Dura glas lined tank fired at 1,600°f for optimum protection from the effects of corrosion
- Factory installed Brass drain valve on all models allows for easy draining of the unit which reduces sediment deposits extending tank life
- Factory installed Brass temperature/pressure relief valve
- American standard point-of-use electric water heaters are all certified at 300 psi test pressure and 150 psi working pressure. All tanks are also 100% hydrostatically tested at the factory
Description
American standard water heaters point-of-use electric models are the ideal solution for hot water requirements in locations where in it is not practical to run long hot water pipes. These models can be installed in spaces under cabinets, counters, mop sinks or in other confined areas. Residential applications come with a 6 year limited tank and parts warranty. Commercial applications come with a 3 year limited warranty on the tank, and a 1 year parts warranty.
5. About Fluid | Aluminum Zinc Flexible Anode Rod KIT for Water Heaters | INCLUDES1-1/16" DEEP WELL SOCKET | Brass Cap | Teflon Tape | 44 Inches Long | GETS RID OF STINKY ROTTEN EGG SMELLING WATER!
Feature
- FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. The INCLUDED 1-1/16” Deep Well Socket will fit and remove your old anode rod and install your new anode upgrade. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- GET RID OF THE EMBARRASSING ROTTEN EGG SMELL IN YOUR HOME with our Aluminum / Zinc Anode Rod! Did you know that the magnesium anode rod inside your hot water tank is the number one key contributor to the production of your smelly, hydrogen sulfide gas? About Fluid solved this problem by creating a flexible anode rod made from an Aluminum/Zinc Alloy, instead of magnesium. This unique alloy works everyday, controlling and killing the bacteria responsible for the sulfur and rotten egg smelling gas.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you. The Brass Cap is there to place on your drain, after you’re done, just to be certain your floors are always dry.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw. All you provide is a ½ Inch Ratchet or Breaker Bar, a few common hand tools, a friend and your favorite beverage! (not included).
- CHANGE THE ANODE ROD, NOT THE WATER HEATER.The anode rod in your water heater is designed to decay instead of your Water’s Heater Tank itself. Eventually, the anode rod is completely consumed (usually just before your water heater warranty is up) and the Water Heater Tank begins to decay and ultimately rusts,fails,cracks and leaks. This is why maintaining the anode rod (by checking and or replacing every 2 years) in your water heater insures the anode rod decays, and not your water heater!
Description
YOU’VE GOT THIS!
WE’LL WALK YOU THROUGH EACH EASY STEP.
1. FITS: Most water heaters including Rheem, Reliance, Richmond, kenmore, State, GE, and many more that use this HEX TYPE (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode.
2. EASY-TO-FOLLOW, STEP-BY-STEP INSTRUCTIONS. Do It Yourself Instructions, written by plumbers and translated for everyday problem solvers like you.
3. WIN THE WAR ON SMELLY WATER! Never have to explain that smell again!
4. ELIMINATE HYDROGEN SULFIDE GAS. Just replace your existing magnesium anode rod with the About Fluid Aluminum/Zinc rod and eliminate that rotten-egg-smelling, hydrogen sulfide gas, in your hot water.
5. EVERYTHING YOU NEED IS INCLUDED FOR EASY INSTALLATION. This Complete Kit includes all-four necessary components:(1) Aluminum/Zinc Flexible Anode with a ¾ Inch diameter and 44 Inches long, capped with the standard ¾ NPT hex plug (2) Heavy-duty, ½ Inch Drive, 1-1/16” Deep-Well Chrome Vanadium Socket Tool (3) Large roll of Teflon Tape and(4) the Brass Cap for your drain valve. All you provide is a ½ Inch ratchet or breaker-bar.
6. YOU CAN REST ASSURED YOU HAVE THE RIGHT SOCKET. This complete kit INCLUDES the 1-1/16” Socket required for this Anode upgrade.
7. NO LEAKS! Be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
8. NO DRIPS! We included a Brass cap you can thread onto your drain after your done, just to be sure your floor is always dry.
9. SAVE YOUR TANK AND SAVE $. This sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
10. INSTALLS-ANYWHERE-DESIGN Using flexible, hinged short sections that are lowered one-by-one into the water heater.
6. CerAnode Powered Anode Rod Expandable for Water Heater (20-100 gal tank) – No More Rotten Egg Smell!
Feature
- Replaces water heater tank’s existing hex head and hot outlet anode
- Expandable anode protects the tank interior from top to bottom
- Water softener use does not affect the longevity or protection
- Best consumer choice in powered anodes since 1983 – Made in the USA
- Requires 3″ or 6″ dialectric nipple and 3/4″ brass tee (not included)
7. Corro-Protec CP-R Water Heater Powered Titanium Anode Rod (40-80 Gallon Tank) – Eliminate Odor (Sulfur/rotten egg smell), Corrosion and Reduce Limescale
Feature
- Say Goodbye to Odors – Eliminate your water heat odor problem by removing the rotten egg smell caused by hydrogen sulfide with our advanced powered anode rod.
- Permanent Corrosion Protection – Designed to replace your 40-80-gallon water heater’s hex head anode rod, it can help defend against any level of water hardness.
- Energy Efficient Design – By reducing mineral accumulation on the tank it can help improve the water quality while reducing stress on the tank to reduce energy costs.
- Quick and Easy Installation – We’ve included an easy-to-follow paper and step-by-step online PDF instructions to make installing your anode rod much easier.
- North American Quality – Manufactured right here in North America, our hot water heater anode rod not only extends the life of your tank but is backed by a 20-year warranty.
8. Thermoflow UT10 2.6-Gallons Electric Mini-Tank Water Heater, 1.5kW at 120 Volts
Feature
- ➤ 2.6 GALLON CAPACITY – 2.6 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it.Stainless steel tank and heating element designed for efficiency, durability and easy replacement.
- ➤ THERMOSTOP FUNCTION – Low stand-by loss power consumption. The Thermoflow UT10 with Advanced Thermostop Technology of Germany, when the water heater reaches a high or low set temperature,it’ll stop heating or reheating automatically.
- ➤ EPS FOAMING TECHNOLOGY – Heating water quickly,fast recovery rate eliminates long waits for hot water at your sink.
- ➤ SAFETY – Active protection circuit for safe installation. If the water heater does not come out with hot water when it’s already connect to the electric supply, then the water heater will cut off the electric supply automatically to prevent the water heater from overheat.
- ➤ NOTES – Please verify that this model is the right size for your hot water needs and electrical requirements before purchase &
- installation. Dimensions: 18H x 12.2W x 11D inches
- Weight: 14 lbs
- Water connections :1/2 inch NPT, Electrical requirements: 1.5 kW, 120 volts. Operating pressure : 150PSI.Nominal current: 13A .
9. Reliance 6 6 SOMS K 6 Gallon Compact Electric Water Heater
Description
Product Description
606 series. 1650/120V. UL listed. No dip tube since the bottom inlet eliminates need for it. 1″ foam insulation/16.00 R-value. Factory installed T&P valve. Meets NAECA codes. Glass lined tank. Inlet and outlet connections on side for easier installation in tight spaces. Warranty: 6 year tank/parts.
From the Manufacturer
Series 606 electrics provide up to 4,500 watts/hr. input — plenty for all your hot water needs.
Conclusion
By our suggestions above, we hope that you can found Ao Smith Warranty For Water Tank for you.Please don’t forget to share your experience by comment in this post. Thank you!
