Nowadays, there are so many products of ao smith ens 40 100 anode rod in the market and you are wondering to choose a best one.You have searched for ao smith ens 40 100 anode rod in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ao smith ens 40 100 anode rod which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
896 reviews analysed
1. About Fluid | Aluminum Zinc Flexible Anode Rod KIT for Water Heaters | INCLUDES1-1/16" DEEP WELL SOCKET | Brass Cap | Teflon Tape | 44 Inches Long | GETS RID OF STINKY ROTTEN EGG SMELLING WATER!
Feature
- FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. The INCLUDED 1-1/16” Deep Well Socket will fit and remove your old anode rod and install your new anode upgrade. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- GET RID OF THE EMBARRASSING ROTTEN EGG SMELL IN YOUR HOME with our Aluminum / Zinc Anode Rod! Did you know that the magnesium anode rod inside your hot water tank is the number one key contributor to the production of your smelly, hydrogen sulfide gas? About Fluid solved this problem by creating a flexible anode rod made from an Aluminum/Zinc Alloy, instead of magnesium. This unique alloy works everyday, controlling and killing the bacteria responsible for the sulfur and rotten egg smelling gas.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you. The Brass Cap is there to place on your drain, after you’re done, just to be certain your floors are always dry.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw. All you provide is a ½ Inch Ratchet or Breaker Bar, a few common hand tools, a friend and your favorite beverage! (not included).
- CHANGE THE ANODE ROD, NOT THE WATER HEATER.The anode rod in your water heater is designed to decay instead of your Water’s Heater Tank itself. Eventually, the anode rod is completely consumed (usually just before your water heater warranty is up) and the Water Heater Tank begins to decay and ultimately rusts,fails,cracks and leaks. This is why maintaining the anode rod (by checking and or replacing every 2 years) in your water heater insures the anode rod decays, and not your water heater!
Description
YOU’VE GOT THIS!
WE’LL WALK YOU THROUGH EACH EASY STEP.
1. FITS: Most water heaters including Rheem, Reliance, Richmond, kenmore, State, GE, and many more that use this HEX TYPE (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode.
2. EASY-TO-FOLLOW, STEP-BY-STEP INSTRUCTIONS. Do It Yourself Instructions, written by plumbers and translated for everyday problem solvers like you.
3. WIN THE WAR ON SMELLY WATER! Never have to explain that smell again!
4. ELIMINATE HYDROGEN SULFIDE GAS. Just replace your existing magnesium anode rod with the About Fluid Aluminum/Zinc rod and eliminate that rotten-egg-smelling, hydrogen sulfide gas, in your hot water.
5. EVERYTHING YOU NEED IS INCLUDED FOR EASY INSTALLATION. This Complete Kit includes all-four necessary components:(1) Aluminum/Zinc Flexible Anode with a ¾ Inch diameter and 44 Inches long, capped with the standard ¾ NPT hex plug (2) Heavy-duty, ½ Inch Drive, 1-1/16” Deep-Well Chrome Vanadium Socket Tool (3) Large roll of Teflon Tape and(4) the Brass Cap for your drain valve. All you provide is a ½ Inch ratchet or breaker-bar.
6. YOU CAN REST ASSURED YOU HAVE THE RIGHT SOCKET. This complete kit INCLUDES the 1-1/16” Socket required for this Anode upgrade.
7. NO LEAKS! Be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
8. NO DRIPS! We included a Brass cap you can thread onto your drain after your done, just to be sure your floor is always dry.
9. SAVE YOUR TANK AND SAVE $. This sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
10. INSTALLS-ANYWHERE-DESIGN Using flexible, hinged short sections that are lowered one-by-one into the water heater.
2. Camco 11553 Magnesium Anode Rod – Fits Atwood Heaters
Description
Camco RV Magnesium Anode Rod extends the life of a water heater by attracting corrosive elements in the water, protecting the tank and elements from corrosion. This Anode Rod fits Atwood water heaters. Patented.
3. E-SDS Residental Magnesium Flexible Anode Rod for Water Heater,Prevent Corrosion Within your Water Heater,Hex Plug,3/4" Thread,44-Inch Long,0.80" Diameter
Feature
- Corrosion Protection: Replacing your anode rod at regular intervals may increase the life of your water heater, saving you money, time and the inconvenience of having to replace your water heater.Anode rod is expected to provide about two years of corrosion protection.
- Flexible Design for Tight Areas: The Flexible anode rod went in very easy because it is segmented into four sections that allow you to bend it at the hinge or difficult access points making it an easy install.
- Advantages of Magnesium Anode Rods: Made from magnesium to provide a healthy solution to your needs and more effective at keeping the water tank from corroding than Aluminum rods.
- Fits: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection.44″ overall length,each section is about 9 1/2″ long.
- Warranty: If you have any questions or issues with your product, contact our customer service team
- A representative will be more than happy to assist you.
4. Blue Lightning 79098 Residental Magnesium Flexible Anode Rod, Hex Plug, 44-Inch
5. Water Heater RV Magnesium Anode Rod for Atwood Heaters 11553-4.5”, 1/2" NPT, For RV, Camper and Trailer Water Heaters Replacement Parts
Feature
- Magnesium Anode Rod Protects your RV water heater from corrosion, prolonging its life
- Magnesium construction is softer and more absorbent than steel
- Rod Size: 0.5″ diameter x 4.5″ long ,Pipe Thread: 1/2″ NPT
- For Use With: Atwood Water Heaters
- Inspect regularly, rods should be replaced yearly or when the corrosion has eaten approximately 75% of the rod’s mass
Description
Description:
Brand : Poweka
Replace Part Number : 11553
Material: Magnesium
0.5″ diameter x 4.5″ long
1/2″ NPT fits Atwood heaters
Magnesium Anode Rod extends the life of a water heater by attracting corrosive elements in the water, protecting the tank and elements from corrosion. This Anode Rod fits Atwood water heaters.
One of the most common killers of RV water heaters is interior corrosion. The water inside your heater contains many destructive properties including heat and harsh minerals that can build up and eat away at the steel sidings in your tank, shortening the life of your heater and leaving you out in the cold with a sopping mess and broken water heater.
Fortunately, interior corrosion is very preventable. Anode Rods insert into your water heater to help draw those corrosive elements away from the tank and onto the rod itself.
6. About Fluid | Magnesium Flexible Anode Rod Kit for Water Heaters | Teflon Tape | Easy-to-Follow, Step-by-Step Instructions | 44 Inches Long. (Without Socket and Cap)
Feature
- Easy-To-Install, Magnesium Anode Rod With Teflon Tape And Step-By-Step Instructions (Without Socket And Cap)
- FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you.
- You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw.
Description
ONE SIZE FITS MOST.Almost all water heaters including; Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. Most water heaters use this HEX TYPE (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode. A few water heaters do use a “hot-water-outlet type” where the anode is part of the outlet piping. (You may want to check first.)
. SAVE YOUR TANK AND SAVE $. Magnesium is the best anode rod material used to protect your water heater. This Magnesium sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
. INSTALL IN SMALL SPACES. The About Fluid flexible hinged design allows you to install the anode rod in any location, requiring only twelve inches of overhead clearance.
7. Osring 44 Inch Zinc Anode Rod for Water Heater, Flexible Anode Rod Kit with Teflon Tape and 1-1/16” Socket Tool, Triple Defense Against Water Odor and Water Tank Inner-Wall Corrosion
Feature
- Sacrificial anode rod for water heater tank is made from aluminum-zinc alloy, strongly curing the smell of rotten egg in hot water.
- Efficiently eliminating rotten egg smell in hot water caused by hydrogen sulfide gas (H2S) and extending service life of your water heater tank.
- Hex plug anode rod with 4/5” diameter has standard 3/4” NPT thread connection. Perfect for most of water heaters, such as Rheem and Richmond!
- Segmented flexible design keeps water anode rod can be cut to the right length to fit different sizes of heaters, for easy installation with Teflon tape provided!
- 27mm deep well socket provided for easily replacing the anode rod by taking the hex head out and putting the new one into water heater tank. Not recommended when water softener is in use!
Description
Does Your Water Stink Like Rotten Eggs?
If your water smells like sulfur/rotten eggs, it could be caused by sulfur bacteria reacting with your water heater tank’s old anode rod.
This reaction results in hydrogen sulfide gas that causing annoying and embarrassing odor, and also corrode your home’s plumbing pipes and prematurely kill your water heater.
Here, We Have the Solution to Your Smelly Water Problem
By replacing your heater’s old anode with Osring Anode Rod, you will put an end to the reaction and the smell.
NOTE: Not recommended when water softener is in use!
No More Rotten Egg Smell!
- Sacrificial Anode rod attracts corrosive elements in the water, and gradually the rod become corroded, so the water tank will never rust out.
- Flexible anode rod 44 inch is built in 4 sections, whose the flexibility keeps it easily installed in water heater tank with 1-1/16” deep well socket provided.
- The anode rod allow you to trim the sections to fit the height of any home water heater, Teflon tape provided for installation.
- Please replacing anode rod about every two years to extend service life of water heater tank.
SPECIFICATION
Color: silver
Material: aluminum-zinc alloy
Length: 44-inch
Package:
– 1pcs * 44in anode rod
– 1pcs * Teflon tape
– 1pcs * socket tool
8. Reliance 9001829005 32-Inch Magnesium Water Heater Anode Rod
Description
Product description
Reliance 9001829-005 Magnsm Adnode Rod
From the Manufacturer
Anode rods protect the water heater tank from corrosion.
9. Osring Flexible Water Heater Anode Rod 44 Inch with Aluminum Zinc Hex Head, Triple Defense Against Water Odor and Inner-Wall Corrosion, Including Teflon Tape
Feature
- Sacrificial anode rod for water heater tank is made from aluminum-zinc alloy, strongly curing the smell of rotten egg in hot water.
- Efficiently eliminating rotten egg smell in hot water caused by hydrogen sulfide gas (H2S) and extending service life of your water heater tank.
- Hex plug anode rod with 4/5” diameter has standard 3/4” NPT thread connection. Perfect for most of water heaters, such as Rheem and Richmond!
- Segmented flexible design keeps water anode rod can be cut to the right length to fit different sizes of heaters, for easy installation with Teflon tape provided!
- Easy to replace the anode rod by taking the hex head out and putting the new one into water heater tank. Not recommended when water softener is in use!
Description
Does Your Water Stink Like Rotten Eggs?
If your water smells like sulfur / rotten eggs, it could be caused by sulfur bacteria reacting with your water heater tank’s old anode rod.
This reaction results in hydrogen sulfide gas that causing annoying and embarrassing odor, and also corrode your home’s plumbing pipes and prematurely kill your water heater.
Here, We Have the Solution to Your Smelly Water Problem
By replacing your heater’s old anode with Osring Anode Rod, you will put an end to the reaction and the smell.
No More Rotten Egg Smell!
- Sacrificial Anode rod attracts corrosive elements in the water, and gradually the rod become corroded, so the water tank will never rust out.
- Flexible anode rod 44 inch is built in 4 sections, whose the flexibility keeps it easily installed in water heater tank.
- The anode rod allow you to trim the sections to fit the height of any home water heater, Teflon tape provided for installation.
- Please replacing anode rod about every two years to extend service life of water heater tank.
NOTE: Not recommended when water softener is in use!
Buy with confidence! All of our products are backed with a 120-day manufacturer’s money back guarantee!
10. Reliance Gas Thermopile Assembly 100112330 9007876005 9007870005 100093980 Water Heater Pilot Assy Compatible with Reliance, State, A.O. Smith, and American Branded Heaters
Conclusion
By our suggestions above, we hope that you can found Ao Smith Ens 40 100 Anode Rod for you.Please don’t forget to share your experience by comment in this post. Thank you!