Nowadays, there are so many products of ao smith electric 50 gallon water heater in the market and you are wondering to choose a best one.You have searched for ao smith electric 50 gallon water heater in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ao smith electric 50 gallon water heater which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
571 reviews analysed
1. A.O. Smith ENS-50 ProMax Short Electric Water Heater, 50 gal
Feature
- Permaglas glass coating protects steel tank from corrosion and maximizes tank life
- Dynaclean diffuser dip tube helps reduce lime and sediment buildup while maximizing hot water output
- made from long-lasting PEX cross-linked polymer
- CoreGard anode rode aluminum anode with stainless steel core protects tank against corrosion longer than ordinary steel anodes
- Durable, tamper-resistant brass drain valve
- Meets all current regulations set forth by the National Appliance Energy Conservation Act (NAECA)
Description
The ProMax family of electric water heaters offers unmatched value and quality. The full product line meets the energy efficiency requirements set forth by the Department of Energy and qualifies for most utility rebate programs. All models are equipped with Permaglas glass coating, certified T&P relief valve, and long-lasting low-watt density copper heating elements. The Dynaclean dip tube reduces lime and sediment buildup for years of dependable hot water. And ProMax gives you plenty of installation choices – including tall, short and lowboy models.
2. A.O. Smith GCG-50 ProMax Tall Gas Water Heater, 50 gal
Feature
- Blue Diamond glass coating provides superior corrosion resistance to industry-standard glass lining
- Self-powered electronic gas valve uses thermopile to generate power needed to operate the electronic gas control without requiring external power
- Internal microprocessor provides enhanced operating parameters and tighter differentials for precise sensing and faster heating response
- Dynaclean diffuser dip tube helps reduce lime and sediment buildup, maximizes hot water output
- made from long-lasting PEX cross-linked polymer
- Meets all current regulations set forth by the National Appliance Energy Conservation Act (NAECA)
3. Rheem MR50245 Marathon Tall Electric Water Heater, 50-Gallon
4. Reliance Water Heater 100109136 Electric Water Heater Plumber Repair Pack, Includes 1 Each Upper Thermostat.
5. Water Heater Ignitor and Flame Rod for AO Smith 9003626005
Description
Water Heater Nitride Ignitor and Flame Sensor Assembly for AO Smith part number 9003626005. 5 Connection Molex Plug. Metal mounting Bracket.
6. A.O. Smith XCR-50 ProMax Plus High Efficiency Gas Water Heater, 50 gal
Feature
- Blue Diamond glass coating provides superior corrosion resistance to industry-standard glass lining
- Self-powered electronic gas valve uses thermopile to generate power needed to operate the electronic gas control without requiring external power
- Internal microprocessor provides enhanced operating parameters and tighter differentials for precise sensing and faster heating response
- Dynaclean diffuser dip tube helps reduce lime and sediment buildup, maximizes hot water output
- made from long-lasting PEX cross-linked polymer
- Meets all current regulations set forth by the National Appliance Energy Conservation Act (NAECA)
7. Rheem SP20060 Electric Water Heater Tune-Up Kit
Description
Product description
Rheem SP20060 Electric Water Heater Tune-Up KitRheem SP20060 Electric Water Heater Tune-Up Kit Features: Repair Kit Plumber’s Pack
From the Manufacturer
Repair your water heater rather than replace it with the Rheem PROTECH Electric Water Heater Tune-Up Kit. This OEM quality Electric Water Heater Tune-Up Kit provides a quick and easy way to repair the most common items on an electric water heater. The tune up kit helps prolong the life of your water heater by renewing the key electrical components of your water heater. The kit includes two 4,500-watt, 240-volt water heater High Watt Density 1” screw-in elements with gaskets, one Therm-O-Disk 240-volt lower thermostats and one Therm-O-Disc upper thermostat. This kit is for units that have 1” screw in water heater elements. They will not fit Rheem Marathon or Eclipse water heaters.
8. About Fluid | Magnesium Flexible Anode Rod Kit for Water Heaters | Teflon Tape | Easy-to-Follow, Step-by-Step Instructions | 44 Inches Long. (Without Socket and Cap)
Feature
- Easy-To-Install, Magnesium Anode Rod With Teflon Tape And Step-By-Step Instructions (Without Socket And Cap)
- FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you.
- You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw.
Description
ONE SIZE FITS MOST.Almost all water heaters including; Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. Most water heaters use this HEX TYPE (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode. A few water heaters do use a “hot-water-outlet type” where the anode is part of the outlet piping. (You may want to check first.)
. SAVE YOUR TANK AND SAVE $. Magnesium is the best anode rod material used to protect your water heater. This Magnesium sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
. INSTALL IN SMALL SPACES. The About Fluid flexible hinged design allows you to install the anode rod in any location, requiring only twelve inches of overhead clearance.
9. Bosch Electric Mini-Tank Water Heater Tronic 3000 T 2.5-Gallon (ES2.5)- Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
Feature
- CONVENIENT HOT WATER HEATER: 2.5 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 10.75 D Inches
- LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
- INDEPENDENT INSTALLATION: 36-37″ cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
- FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
Description
Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 2.5-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room.
10. About Fluid | Aluminum Zinc Flexible Anode Rod KIT for Water Heaters | INCLUDES1-1/16" DEEP WELL SOCKET | Brass Cap | Teflon Tape | 44 Inches Long | GETS RID OF STINKY ROTTEN EGG SMELLING WATER!
Feature
- FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. The INCLUDED 1-1/16” Deep Well Socket will fit and remove your old anode rod and install your new anode upgrade. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- GET RID OF THE EMBARRASSING ROTTEN EGG SMELL IN YOUR HOME with our Aluminum / Zinc Anode Rod! Did you know that the magnesium anode rod inside your hot water tank is the number one key contributor to the production of your smelly, hydrogen sulfide gas? About Fluid solved this problem by creating a flexible anode rod made from an Aluminum/Zinc Alloy, instead of magnesium. This unique alloy works everyday, controlling and killing the bacteria responsible for the sulfur and rotten egg smelling gas.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you. The Brass Cap is there to place on your drain, after you’re done, just to be certain your floors are always dry.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw. All you provide is a ½ Inch Ratchet or Breaker Bar, a few common hand tools, a friend and your favorite beverage! (not included).
- CHANGE THE ANODE ROD, NOT THE WATER HEATER.The anode rod in your water heater is designed to decay instead of your Water’s Heater Tank itself. Eventually, the anode rod is completely consumed (usually just before your water heater warranty is up) and the Water Heater Tank begins to decay and ultimately rusts,fails,cracks and leaks. This is why maintaining the anode rod (by checking and or replacing every 2 years) in your water heater insures the anode rod decays, and not your water heater!
Description
YOU’VE GOT THIS!
WE’LL WALK YOU THROUGH EACH EASY STEP.
1. FITS: Most water heaters including Rheem, Reliance, Richmond, kenmore, State, GE, and many more that use this HEX TYPE (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode.
2. EASY-TO-FOLLOW, STEP-BY-STEP INSTRUCTIONS. Do It Yourself Instructions, written by plumbers and translated for everyday problem solvers like you.
3. WIN THE WAR ON SMELLY WATER! Never have to explain that smell again!
4. ELIMINATE HYDROGEN SULFIDE GAS. Just replace your existing magnesium anode rod with the About Fluid Aluminum/Zinc rod and eliminate that rotten-egg-smelling, hydrogen sulfide gas, in your hot water.
5. EVERYTHING YOU NEED IS INCLUDED FOR EASY INSTALLATION. This Complete Kit includes all-four necessary components:(1) Aluminum/Zinc Flexible Anode with a ¾ Inch diameter and 44 Inches long, capped with the standard ¾ NPT hex plug (2) Heavy-duty, ½ Inch Drive, 1-1/16” Deep-Well Chrome Vanadium Socket Tool (3) Large roll of Teflon Tape and(4) the Brass Cap for your drain valve. All you provide is a ½ Inch ratchet or breaker-bar.
6. YOU CAN REST ASSURED YOU HAVE THE RIGHT SOCKET. This complete kit INCLUDES the 1-1/16” Socket required for this Anode upgrade.
7. NO LEAKS! Be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
8. NO DRIPS! We included a Brass cap you can thread onto your drain after your done, just to be sure your floor is always dry.
9. SAVE YOUR TANK AND SAVE $. This sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
10. INSTALLS-ANYWHERE-DESIGN Using flexible, hinged short sections that are lowered one-by-one into the water heater.
Conclusion
By our suggestions above, we hope that you can found Ao Smith Electric 50 Gallon Water Heater for you.Please don’t forget to share your experience by comment in this post. Thank you!
