Top 9 Ao Smith Dre 52

Century Electric Motor, Resilient Base, Split Phase, Century, 115 VAC, 5.4 A, 60 Hz, 1/4 hp Power, Number of Phase: 1, 1725 rpm, 1/2 in Shaft Diameter, 1-1/2 in Shaft Length, Service Factor: 1.35, CW/CCW Rotation Type, Sleeve Bearing, Cradle Mounting, 1-3/8 in Mounting Hole Center, 54 % Efficiency, 40 deg C Ambient, Class B Insulation, Open Drip proof. Split phase motor, 5.4 amps, 60 hertz, auto protector, Sleeve Bearing, 1/2-Inch x 1-1/2-Inch shaft.

Water Heater Nitride Ignitor and Flame Sensor Assembly for AO Smith part number 9003626005. 5 Connection Molex Plug. Metal mounting Bracket.

Dimensions ref. (1) C = 20-1/8″, BM = 3-5/8″, N1 = 5-3/8″, N = 5-3/8″. This is an aftermarket replacement motor. Be sure to review the specs and dimensions to your motor to verify it will work. This has also been used for 6757A313, 6757A311, K55HXJCP-2593, 322P708

MARS-2 Unit Bearing Cast Iron Motors are used on refrigerators, freezers, food & beverage coolers, vending machines, display cases, and many other fan duty applications. features:Cast iron constructionUniversal mountMounting screws includedIndividually boxedUL recognized

This single-compartment, permanent split capacitor motor can be used as an equivalent replacement for most popular pool and spa manufacturers’ pumps. Must equal or exceed service factor and HP for proper replacement. Auto thermal protection helps protect against damage caused by overheating. Ball bearings. UL Recognized and CSA Certified. Pool Pump Motor, 1 HP, 3450 RPM, 115/230V

This unique package features a 1HP (750W) multi-firing switched reluctance motor and intelligent controller, designed and developed by Striatech. Unlike its competitors, This smart motor delivers an experience that suits your application through its intelligent control System. This variable speed motor communicates with its internal micro-computer, which constantly monitors conditions and reacting to its environment. This micro-computer is monitoring the rotor constantly, and when the load is put onto the Spindle, more power will be provided to the electric magnets to pull the rotor around, thus maintaining a constant RPM regardless of the load. This key feature helps deliver up to a 50% energy savings over comparable motors. Maintenance is easier on a Striatech motor. Because its windings are in the stator (rather than wrapped around the rotor), There Is No centripetal force pulling the windings, and therefore no need to ever re-wind ever again. With simple construction and No permanent magnets, brushes and commutators, this motor is truly built to last. The control system is so precise that it can also function as a stepper motor, in addition to its usual variable speed option. This motor can reach speeds from 100-6000 RPM in forward or reverse. This motor also features a built-in USB connection for easy firmware updates. It is compatible at 115 V – 240 V, 50 Hz – 60 Hz single phase input.