The Best Ao Smith Del 50102

Product Description

Pool motor, 50-Degree C ambient temperature, 303 stainless steel threaded shaft.

From the Manufacturer

The A.O. Smith two horsepower round flange up-rated replacement motor for swimming pool pumps has a threaded shaft and fits most pumps that require a round flange motor. It operates on both 115 and 230-Volts. The UST1202 is compatible with Hayward Super, Super II, and Max-Flow pumps, Jacuzzi Magnum pumps, and Pentair Pinnacle pumps.

Product Description

The GE Whole Home System Replacement Filter reduces more than five contaminants in your water, including chlorine, sediment and rust. Includes one replacement filter compatible with the GXWH40L and GXWH35F systems and made for simple and easy filter installation. Recommended replacement every 3 months or 30,000 gallons for fresh, filtered water throughout your entire home. NSF/ANSI certified.

From the Manufacturer

The FXHTC GE Smart Water whole house water filter is designed for GE Smart Water heavy duty water filtration systems. The GE FXHTC fits any other brand of water filter housing that uses 10-Inch x 4-1/2-Inch filter cartridges.

Product Description

Factory pre-charge: 38 psi (pounds per square inch). maximum working pressure 100 psi. Maximum operating temperature 200 F (Degree Fahrenheit). engineered to provide years of trouble-free service using cold rolled steel for a higher strength to weight ratio. Rugged, stable steel base with protective plastic strip. Heavy-duty butyl rubber diaphragm and durable polyolefin liner to prevent corrosion. Water worker tanks feature an appliance quality finish which is resistant to sunlight and harsh conditions. All tanks are completely lead free for safety. Meets nsf (National Sanitation foundation) standard 61 for clean, safe drinking water. 5 year warranty. Blue tank.

From the Manufacturer

The WaterWorker pre-charged tanks utilize a butyl composite diaphragm, which flexes up and down based on water level and air pressure, as the pump fills the tank with water the air above the diaphragm is compressed, increasing the pressure in the tank until the pump cut-off pressure is reached. When water is drawn from the tank, the pressure inside the tank decreases until the pressure switch starts the pump. The amount of usable water for every pump cycles is called drawdown. The greater drawn-down capacity you select, the less your pump cycles saving energy, money, and extending your pump life. Advantages over galvanized well tanks: Pre-charged tanks do not have water-logging problems like the galvanized tanks. The air and water are totally separated using a diaphragm. No external air controls needed. Pre-charged tanks have a much larger draw-down for the same physical size. Larger draw down reduces pump cycles and pump wear, i.e. at 30/50 PSIG range three times the draw-down for pre-charged tanks of the same physical size. Pre-charged Tanks completely empty during each pump cycle. Pre-charged Tanks are much smaller and easier to handle that galvanized well tanks. Pre-charged tanks with a 30/50 Pressure Switch would be one-third the size of a galvanized tank with the same drawdown. Deep Well Jet Pumps could use either a vertical tank or a horizontal tank, depending on space requirements and sizing. Submersible Pump applications would usually use vertical tanks, again based on proper sizing. Shallow Well Jet Pumps could use vertical or horizontal tanks, based on proper sizing. The rule of thumb in sizing is to count the number of fixtures in the home, i.e. sinks, showers, toilets, dishwasher, faucets, washing machines, outside faucets, etc. and multiply it by 3. Example: a house with 11 fixtures x 3 would be 33-Gallon tank. We would suggest our 44-Gallon tank, which is the next larger sized tank.This is a Hazmat non-returnable item

Product Description

The GE Whole Home System Replacement Filter reduces more than five contaminants in your water, including chlorine, bacteria and sand. Includes one replacement filter compatible with the GXWH40L and GXWH35F systems and made for simple and easy filter installation. Recommended replacement every 3 months or 24,000 gallons for fresh, filtered water throughout your entire home. NSF/ANSI certified.

From the Manufacturer

The FXHSC GE SmartWater Whole House Sediment Filter Replacement Cartridge is designed for GE Smart Water heavy duty water filtration systems. The GE FXHSC fits any other brand of water filter housing that uses 9-3/4-Inch x 4-1/2-Inch filter cartridges. Fits any brand of whole house water filter system that uses standard 9-3/4 x 4-1/2 filter cartridges. Filter Life: 3 months or 24000 gallons (whichever comes first) Flow Rate: 3 – 10 gallons per minute Operating Temperature: 100 degrees Fahrenheit Micron Rating: 30 microns Filter Type: Pleated Paper Actual Size: 10-Inches (length) x 4-5/8-Inches (diameter) GE Part Number: FXHSC (SmartWater) Original GE FXHSC Filter

Product Description

AMTROL ST-5 Thermal Expansion Tank

From the Manufacturer

Amtrol invented the thermal expansion tank to control pressure build-up in closed, hot water systems. This prevents the water heater pressure relief valve from opening, saves energy and eliminates a potential safety hazard. All Therm-X-Trol expansion tank

Product Description

Amtrol Inc. designed and patented the first Extrol diaphragm expansion tank in 1954 to control system pressure and help reduce energy consumption in heating and chilled water systems. Over six decades later, Extrol is still the world’s leading expansion

From the Manufacturer

Amtrol Inc. designed and patented the first Extrol diaphragm expansion tank in 1954 to control system pressure and help reduce energy consumption in heating and chilled water systems. Over six decades later, Extrol is still the world’s leading expansion

2. 1 us gal (8L) in-line captive air pressure tank. Designed for water systems assembled with a jet pump. Tough epoxy-baked finish for durability. Replaceable bladder made of synthetic butyl rubber to increase reliability and life span. No water to metal contact for rust-free operation. Stainless steel flange with 1 inch NPT connection. 100 psi maximum working pressure. For use with a 20/40 psi pressure switch, the air pressure must be adjusted to 18 psi; for a 30/50 psi switch, the pressure must be adjusted to 28 psi. Drawdown 0. 7 us gal (20/40 psi); 0. 6 us gal (30/50 psi).

PURCHASE INCLUDES: (1)WX-202XL pressure tank. BRAND NEW NEVER BEEN USED! 7 YEAR WARRANTY THROUGH Seller–BUYER PAYS RETURN SHIPPING! Factory pre-charged pressure: 38 PSI; System connection: 1" NPT; Max. operating temperature: 200F; Max. working pressure: 125 PSI; Tank volume: 26 gallons; Height: 38-1/4"; Diameter: 15-3/8"; Shipping weight: 36 lbs; Shell: Steel; Diaphragm: Heavy Duty Butyl; Liner: Virgin Polypropylene; Coating: Blue Enamel.

What is Hydronic Expansion?
Hydronic expansion tanks are diaphragm type tanks designed to keep system pressures below relief valve settings. Hydronic expansion tanks absorb the expansion of water in residential or commercial hydronic (forced hot water) heating and cooling systems. Without hydronic expansion tanks, the system will quickly over-pressurize resulting in added stress to the various system components. Hydronic expansion tanks protect safety valves from failing or wearing out quickly, avoids valve stem and ball seal leaks, prevents wasted BTU’s and vastly extends water heater life.

Technical Features

• Certified synthetic SBR rubber diaphragm
• MIG welding eliminates interior rough spots and sharp edges
• Each tank is factory leak tested to ensure tank integrity
• All diaphragms designed to maximize drawdown
• External baked epoxy-polyester coating provides a durable appliance finish
• Welded side outlet allows easy and quick installation
• Protected pre charge valve eliminates potential leak path
• Low profile tank design with full membrane depth eliminates stretching of diaphragm, providing increased life cycle

Additional Description

• Shell: Carbon Steel
• Connection: Carbon Steel
• Diaphragm: SBR Synthetic Rubber
• Color: Gray

Operating Conditions

• Max. Operating Pressure: 75 PSI
• Operating Temperature: 210 Degrees Fahrenheit
• Factory Precharge: 12 PSI
• Warranty: 1 Year

Specifications

• Model Number: FTH15
• Tank Size: 2.1 Gallons
• Tank Weight: 4.6 Pounds
• Connection Size (National Pipe Thread): 1/2" Male Iron Pipe (MIP)
• Dimensions (LxWxH): 9" x 9" x 13"
• Acceptance Volume: 1.4 Gallons
• UPC Code: 80459513060