Finding your suitable readers for ao smith 55 gallon hot water heater anode rod is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for ao smith 55 gallon hot water heater anode rod including detail information and customer reviews. Let’s find out which is your favorite one.
977 reviews analysed
1. About Fluid | Aluminum Zinc Flexible Anode Rod KIT for Water Heaters | INCLUDES1-1/16" DEEP WELL SOCKET | Brass Cap | Teflon Tape | 44 Inches Long | GETS RID OF STINKY ROTTEN EGG SMELLING WATER!
Feature
- FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. The INCLUDED 1-1/16” Deep Well Socket will fit and remove your old anode rod and install your new anode upgrade. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- GET RID OF THE EMBARRASSING ROTTEN EGG SMELL IN YOUR HOME with our Aluminum / Zinc Anode Rod! Did you know that the magnesium anode rod inside your hot water tank is the number one key contributor to the production of your smelly, hydrogen sulfide gas? About Fluid solved this problem by creating a flexible anode rod made from an Aluminum/Zinc Alloy, instead of magnesium. This unique alloy works everyday, controlling and killing the bacteria responsible for the sulfur and rotten egg smelling gas.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you. The Brass Cap is there to place on your drain, after you’re done, just to be certain your floors are always dry.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw. All you provide is a ½ Inch Ratchet or Breaker Bar, a few common hand tools, a friend and your favorite beverage! (not included).
- CHANGE THE ANODE ROD, NOT THE WATER HEATER.The anode rod in your water heater is designed to decay instead of your Water’s Heater Tank itself. Eventually, the anode rod is completely consumed (usually just before your water heater warranty is up) and the Water Heater Tank begins to decay and ultimately rusts,fails,cracks and leaks. This is why maintaining the anode rod (by checking and or replacing every 2 years) in your water heater insures the anode rod decays, and not your water heater!
Description
YOU’VE GOT THIS!
WE’LL WALK YOU THROUGH EACH EASY STEP.
1. FITS: Most water heaters including Rheem, Reliance, Richmond, kenmore, State, GE, and many more that use this HEX TYPE (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode.
2. EASY-TO-FOLLOW, STEP-BY-STEP INSTRUCTIONS. Do It Yourself Instructions, written by plumbers and translated for everyday problem solvers like you.
3. WIN THE WAR ON SMELLY WATER! Never have to explain that smell again!
4. ELIMINATE HYDROGEN SULFIDE GAS. Just replace your existing magnesium anode rod with the About Fluid Aluminum/Zinc rod and eliminate that rotten-egg-smelling, hydrogen sulfide gas, in your hot water.
5. EVERYTHING YOU NEED IS INCLUDED FOR EASY INSTALLATION. This Complete Kit includes all-four necessary components:(1) Aluminum/Zinc Flexible Anode with a ¾ Inch diameter and 44 Inches long, capped with the standard ¾ NPT hex plug (2) Heavy-duty, ½ Inch Drive, 1-1/16” Deep-Well Chrome Vanadium Socket Tool (3) Large roll of Teflon Tape and(4) the Brass Cap for your drain valve. All you provide is a ½ Inch ratchet or breaker-bar.
6. YOU CAN REST ASSURED YOU HAVE THE RIGHT SOCKET. This complete kit INCLUDES the 1-1/16” Socket required for this Anode upgrade.
7. NO LEAKS! Be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
8. NO DRIPS! We included a Brass cap you can thread onto your drain after your done, just to be sure your floor is always dry.
9. SAVE YOUR TANK AND SAVE $. This sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
10. INSTALLS-ANYWHERE-DESIGN Using flexible, hinged short sections that are lowered one-by-one into the water heater.
2. Powered Anode Rod System 100305721 for A.O. Smith, Reliance, State, American, Whirlpool, and Craftmaster Branded Hot Water Heaters Up to 50 gallons
Feature
- The Product Preservers Powered Anode System uses patented adaptive technology that quickly adjusts to your water type providing the precise amount of current needed to deliver the best protection for your water heater tank
- Consistent protection is paramount in maintaining the integrity of the steel water heater tank. Built-in LED fault light and audible alarm provides peace of mind knowing the system is working properly
- Installation is made easy for professionals with a small control box that can plug into any standard 120 volt wall outlet
- Eliminates smelly water issues caused by sacrificial magnesium anodes
- Great for softened water applications
3. About Fluid | Magnesium Flexible Anode Rod Kit for Water Heaters | Teflon Tape | Easy-to-Follow, Step-by-Step Instructions | 44 Inches Long. (Without Socket and Cap)
Feature
- Easy-To-Install, Magnesium Anode Rod With Teflon Tape And Step-By-Step Instructions (Without Socket And Cap)
- FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you.
- You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw.
Description
ONE SIZE FITS MOST.Almost all water heaters including; Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. Most water heaters use this HEX TYPE (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode. A few water heaters do use a “hot-water-outlet type” where the anode is part of the outlet piping. (You may want to check first.)
. SAVE YOUR TANK AND SAVE $. Magnesium is the best anode rod material used to protect your water heater. This Magnesium sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
. INSTALL IN SMALL SPACES. The About Fluid flexible hinged design allows you to install the anode rod in any location, requiring only twelve inches of overhead clearance.
4. Reliance 9001829005 32-Inch Magnesium Water Heater Anode Rod
Description
Product description
Reliance 9001829-005 Magnsm Adnode Rod
From the Manufacturer
Anode rods protect the water heater tank from corrosion.
5. RV Water Heater Anode Rod with Pre-Applied Thread Sealant, Pure Magnesium, 9-in Length, 1-1/16 Hex Head, Fits Suburban Mor-Flo Atwood & Many Others
Feature
- PRE-APPLIED THREAD SEALANT ensures convenient NASA-grade watertight seal under high heat and pressure. Saves you space & worry by eliminating the need for teflon tape! Sealant is American-made & NSF 61-approved for use with potable water, and can be used with teflon tape if desired.
- HIGH PURITY MAGNESIUM. An essential element for the body, provides superior protection to your water heater.
- SPACE-SAVING PACKAGING in heavy-duty polybag keeps things compact and is easy to open!
- PUT SUPERIOR PROTECTION IN YOUR HOME…PURCHASE A STOLTCO POWERED ANODE: https://amzn.to/2QchoTC
Description
Industry-standard 9″ sacrificial magnesium anode rod, but with pre-applied American-made thread-sealant that allows installation with or WITHOUT teflon tape, thereby saving time/cost. This anode is packaged in a heavy-duty plastic bag which saves space in RV’s, boats, and other tight quarters. Please check other STOLTCO products for other great value anode kits. Thanks!!
6. Kohree 44" Aluminum Zinc Anode Rod Flexible Water Heater Protection Anode Rod Includes 1 Tape Water Heaters Tank – 3/4" NPT Threads for Rheem, Reliance, Richmond, Kenmore, State, GE
Feature
- 【Application】: Size: 44″ long, 3⁄4″ thread, using 1-1 / 16″ socket. It is used to replace the rust bar in the water tank of the water heater. Perfect replacement for Rheem, Reliance, Richmond, Kenmore, State, GE and more.
- 【High Quality Material】:Made of non-toxic aluminum zinc, compared with 316 stainless steel connectors, durable and safe.
- 【Better Protection】: The aluminum zinc hex head anode rod can prevent the water tank from rusting in the metal water tank, and it can absorb the oxidized substances, get rid of rotten egg smells, and prolong the life of the water tank.
- 【Easy Installation】:We provide a roll of tape to tighten the screw, preventing looseness.
- 【100% Customer Satisfaction】Providing high quality products and excellent service has always been our top priority, if you have any questions, feel free to contact us for help.
7. Magnesium Anode Rod, Magnesium Flexible Water Heater Anode Rod by Podoy for Hot Water Heaters 3/4 inch NPT Thread, Hex Plug, 44” Long & 0.8” Diameter
Feature
- ★ ADVANTAGES OF MAGNESIUM ANODE RODS – Magnesium anode rods produce a stronger current than Aluminum rods making them more effective at keeping the water tank from corroding.
- ★ EXTEND LIFE OF YOUR WATER HEATER: Magnesium anode rod gets corroded faster than tank of water heater. Usually you should check magnesium anode rod every 2 years.
- ★ FLEXIBLE DESIGN – This 44 Inch-long rod is hinged into four parts. Each part is less than 12 Inches allowing you to replace anode rodes easily even in a narrow space. Just safely cut it shorter with a simple hacksaw.
- ★ CORROSION PROTECTION: Replacing your anode rod at regular intervals may increase the life of your water heater, saving you money, time and the inconvenience of having to replace your water heater.Anode rod is expected to provide about two years of corrosion protection.
- ★ FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection.
Description
A long metal “anode rod” that attracts corrosive elements in the water. When the rod itself becomes so corroded that it can no longer do its job, the tank soon rusts out, leaks and needs replacement. However, if you replace your water heater anode rod before it fails, about every tow years, you can double the life of your water heater.
How to replace your Water Heater Anode Rod?/
Step1: Before you get started, close the shutoff valve, turn on the hot water at a faucet to relieve pressure, and turn off the electricity or gas to the heater. Open the drain valve near the bottom of the tank and drain out several gallons of water. Caution: The water is hot!
Step2: Drain some water from the tank to check for rust. It’s time for a new water heater if you see rusty flakes (not just orange water, which can come from corroded pipes or well water). If the water is clean, remove the rod to check its condition.
Step3: To loosen the rod, you’ll need an air compressor, a 1/2-in.-drive impact wrench and a 1-1/16-in. Even with a breaker bar, it can be nearly impossible to break the anode rod free.
Step4: Turn off the power or gas. Then close the cold-water valve at the top of the tank and drain off several gallons. Loosen the hex head with the impact wrench, but unscrew it the rest of the way by hand.
Hint:
The hex head may be under a plastic cap. Uncover it, then pull it up and out to check its condition. When the threads break free, stop turning and look for water around the hex head. If you see leakage, drain the tank further. If you don’t have enough overhead clearance to pull the rod out of the tank, bend it as you remove it.
8. Reliance Water Heater Co 9003542 Natural Gas Pilot Assembly
9. RV Water Heater Magnesium Anode Rod Set – 2-Piece Kit Water Heater Anode Rods with PTFE Tape – Compatible with Suburban and Mor-Flo Water Heater Tanks – 9.25" Length ¾" NPT Threads
Feature
- WHAT YOU NEED: If you’re using a water heater tank, you should keep in mind that its interior is always subjected to the corrosive action of oxygen and other elements. In order to prolong its life and save your money and time, we offer the perfect solution!
- SAFETY COMES FIRST: These RV water heater anode rods are made from superior quality, extra-durable magnesium guaranteed to withstand the test of time. Unlike classic aluminum zinc rods, our products are 100% for the entire family!
- COMPATIBILITY: These magnesium anode rods are 9.25” long, come with ¾” NPT threads and are compatible with Suburban and Mor-Flo water tanks. The rods use a 1-1/16 inch socket.
- LONGER LIFE: These water heater magnesium anode rods work better than aluminum ones in attracting corrosive elements, protecting your water heater and prolonging its life span with little to no investment.
- GREAT DEAL PACKAGE: This practical RV water heater kit includes 2 magnesium anode rods and a BONUS PTFE tape, all set for fixing up your water heater tank and optimizing its functionality!
Description
Small part, Big Impact
Are you tired of spending enormous amounts of money and energy with expensive
fixing procedures of your water tank? Would you like to avoid unpleasant and unforeseen
investments when it comes to your water heating sources? You’ve come to the right place!
Why is this product for you?
This 2-piece anode rod set is made from top-quality magnesium which is non-toxic and entirely
safe for the human body! The high absorption rate of corrosive elements makes it a better choice
than aluminum, keeping your water tank in perfect functioning condition for years. Plus, with
a bonus PTFE tape included, the installation process is easy for anyone
Some of the amazing features of this product:
- Set includes: 2 anode rods, 1 PTFE tape;
- Dimensions: 25″ Length ¾” NPT Threads;
- Uses 1-1/16 inch socket;
- Compatible with Suburban and Mor-Flo models;
- Material: magnesium;
- Safe for humans.
Add to cart now and reap all the benefits this RV Water Heater Magnesium Anode Rod Set has to offer!
10. E-SDS Residental Magnesium Flexible Anode Rod for Water Heater,Prevent Corrosion Within your Water Heater,Hex Plug,3/4" Thread,44-Inch Long,0.80" Diameter
Feature
- Corrosion Protection: Replacing your anode rod at regular intervals may increase the life of your water heater, saving you money, time and the inconvenience of having to replace your water heater.Anode rod is expected to provide about two years of corrosion protection.
- Flexible Design for Tight Areas: The Flexible anode rod went in very easy because it is segmented into four sections that allow you to bend it at the hinge or difficult access points making it an easy install.
- Advantages of Magnesium Anode Rods: Made from magnesium to provide a healthy solution to your needs and more effective at keeping the water tank from corroding than Aluminum rods.
- Fits: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection.44″ overall length,each section is about 9 1/2″ long.
- Warranty: If you have any questions or issues with your product, contact our customer service team
- A representative will be more than happy to assist you.
Conclusion
By our suggestions above, we hope that you can found Ao Smith 55 Gallon Hot Water Heater Anode Rod for you.Please don’t forget to share your experience by comment in this post. Thank you!