Top 8 Ao Smith 5 Backflow Preventer 2Svbfdpa05

Do not use this item for any installation or repair of potable water applications. This product does not comply with the “Safe Drinking Water Act,” which requires that products meet low-lead standards in order to be used in systems providing water for human consumption (drinking or cooking). This item is for non-potable (non-human consumption) water applications only (irrigation, fire sprinkler, etc.) Series 009 Reduced Pressure Zone Assemblies prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure. It consists of bronze body construction (1/4 to 2 in., 8 to 50mm) or FDA approved epoxy coated cast iron (2 1/2 to 3 in., 65 to 80mm), two, in-line independent check valves, replaceable check seats with an intermediate relief valve, and ball valve test cocks. Series 009 is ideal for protection of health hazard cross-connections or for containment at the service line entrance. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

The AG110 series Reverse Osmosis (RO) water filter air gaps are intended for installations with flows of 1/2 gallon/minute. This unit is a gravity flow device and as such must have a drain line feeding directly to a drain without kinks and bends. The RO air gap must be installed per the manufacturer’s instructions and permanently clamped or affixed into the down leg of drain line piping, such that the normal forward stream of water can continue flowing freely through the outlet piping. The inlet port fits 1/4-inch poly tuning and the outlet port fit 3/8-inch poly tubing. The RO air gap provides the following advantages: Super strong material to provide secure connection, tested and listed for compliance with applicable plumbing codes to ensure legal installation, easy to install and easy to maintain.

Watts pleated cartridges outperform wound, spun, melt blown, resin bonded and other “depth” style filter elements because our pleated cartridges provide increased surface area, lower pressure drop and longer service life. Our 100% synthetic media is washable and cleanable, five micron and up, to reduce filtration costs. Features:Filter media is pleatedCellulose-FREE, 100% synthetic mediaIndividually wrapped for purityWashable and reusable BenefitsGreater dirt holding capacity; more surface areaLower initial pressure drop; higher flow ratesLonger lifeReduced filtration costsSuperior performance with no additives or binders to break down which may cause foaming and filter degradation.Additional security at no additional charge.Reduce filter replacement costs.Easily identify standard OD replacements. Washable and reusable: Watts pleated cartridges are washable and reusable, five micron and up to reduce filtration costs. For best results, direct spray into the pleats to dislodge the sediment Watts pleated specifications:Maximum temperature: 140°F (60°C)Minimum temperature: 40°F (4.4°C)Maximum pressure: 40 psidRecommended change out: 25 psidFilter Media: Cellulose-free synthetic pleated polypropyleneMaterial – center tube: PolypropyleneMaterial – end caps: Molded PolyurethaneID: 1-1/6.