The Best Admiral Dryer Won’t Start

Dryer thermal fuse. Located on the blower housing. If the dryer overheats, the thermal fuse blows to cut off power to the dryer. If the thermal fuse has blown, the dryer won’t start. The thermal fuse cannot be reset—if the fuse has blown, replace it. Thermal fuses often blow due to a clogged vent.

SPECIFICATIONS:

The 3392519 Dryer Thermal Fuse replacement part by OfficialPartsWholesale is engineered for use in dryers. This fuse acts as a safety device that stops the flow of electricity to the heating element (or heater coil) when dryer overheats. When this fuse trips or becomes faulty, your dryer will not start or it won’t heat properly. This is a one time fuse and cannot be re-set. It must be replaced when there is no continuity between its terminals. It’s very simple to test the fuse for continuity if you have an ohmmeter or a multimeter and are familiar with how to use it. Because the fuse is so inexpensive, many people that do not have a meter opt out to simply replace it instead based on the symptoms. For example, if your dryer is too noisy, this fuse is not the likely culprit. On the other hand, if your dryer won’t start or does not produce any heat, it is very likely that this fuse is the problem. The fuse has two 3/16 inch male terminals and is attached to two 3/16 female terminals on the dryer blower wheel housing. Blown fuses can be caused by clogged dryer vents and we highly recommend checking to make sure that all of the vents are clear of lint when replacing the fuse. Vacuum cleaner comes pretty handy when cleaning dryer vents. And, as always, when dealing with electricity, you must insure that the power is shut off to your appliance before performing any repairs or disassembly. This dryer thermal fuse is fairly simple and quick to replace and is a good reminder to keep your dryer vents clean.

Works with most top name brand dryers: Whirlpool, Sears, Kenmore, Roper, KitchenAid, Maytag, Estate, Inglis, Crosley, Amana, Admiral, and Magic Chef.

Fixes the following symptoms:

No heat or not enough heat
Dryer won’t start
Too hot
Takes too long to dry
Won’t shut off
Timer won’t advance
Dryer won’t tumble
Control Panel / Touch Pad won’t respond

Replacement thermal fuse by DR Quality Partsfor most top name brand dryers. Comparable Part Numbers 3388651 and 3392519 Amazon Prime fast shipping. The fuse is a safety mechanism that stops the flow of electricity to the heating element when a dryer overheats. When this fuse is broken your dryer will not start or it will not heat properly. This is a one-time thermal fuse, it must be replaced when there is no longer continuity between the terminals. This replacement part features two 3/16 inch terminals and is sold individually. It attaches to the blower wheel housing. Blown fuses can be caused by clogged dryer vents and is recommended checking to make sure all of the vents are clear when you perform this repair.

Replaces the following parts : 3392519, wp3392519, 3388651, 694511, 80005

Works with most top name brand dryers: Whirlpool, Kenmore, KitchenAid, Roper, Estate, Crosley, Inglis, Maytag, Amana, Admiral, Magic Chef.

Fixes the following symptoms:
No heat or insufficient heat.
Too hot.
Takes too long to dry.
Won’t Start.
The timer does advance. Shuts off too soon.
Won’t shut off.
Will not tumble.
Touchpad does not respond.

Buy today and get your dryer back to working order. Click “Add to Cart” now!

The Whirlpool brand names and logos are the registered trademarks of their respective owners. Any use of the Whirlpool brand name or model designation for this product is made solely for purposes of demonstrating compatibility. This warranty is limited to the original purchaser, and is not transferable to subsequent owners of the product unless sold through an authorized re-seller. DR Quality Products is the only authorized seller.

279838 Heating Element is rated at 5400 Watts 240 Volts and has 2- 5/16″ male terminals.
279838 heating element replacement for numbers 2438, 279837, 279838, 279838A, 279838VP, 3398064, 3403585, 8565582, AP3094254, W10724237.

279816 Thermostat Kit includes a thermal cut-off fuse, a high-limit thermostat, an electrical connection hardware and an instruction sheet.
Used with 29″ and 27″ electric dryers only.
279816 thermal cutoff kit replaces part numbers 2651, 279816VP, 3399848, 3977393, AP3094244

3392519 dryer thermal fuse is used indryers as a safety mechanism that stops the flow of electricity to the motor circuit when a dryer overheats.
This replacement part features two 3/16 inch terminals, and is sold individually.
When this fuse is faulty, your dryer will not start or it will not heat properly.
This is a one-time fuse, meaning it cannot be re-set.
It must be replaced when there is no longer continuity between the terminals.
3392519 dryer thermal fuse replaces part number 3388651, 3392519, 694511, 80005, WP3392519VP

Works with most top name brands:  Whirlpool, Kenmore, Roper, Maytag, Estate, Inglis, KitchenAid, Crosley, Amana, Admiral, Magic Chef.

Package list:
1PC 279838 Dryer Heating Element
1PC 279816 Thermal Cut-off Kit
1PC 3392519 Dryer Thermal Fuse

Siwdoy Customer Service

Siwdoy is committed to providing each customer best customer service. if any question ,Please don’t hesitate to contact us.

10 PACK

Replacement thermal fuse by us for most top name brand dryers. Comparable Part Numbers 3388651 and 3392519

The fuse is a fail-safe that stops the electricity to the heating system when a dryer overheats. When this fuse is broken your dryer will not start or it will not heat properly. This fuse self-destructs and cannot be reset, it must be replaced when there is no continuity between the terminals. The fuse has two terminals and is sold individually. It attaches to the blower wheel housing. Blown fuses can be caused by clogged ventilation and is recommended checking to make sure all the vents clear with proper airflow when you perform this repair.

Replaces the following parts: 3392519, wp3392519, 3388651, 694511, 80005

Works with the majority of name brand dryers: Whirlpool, Kenmore, KitchenAid, Roper, Estate, Crosley, Inglis, Maytag, Amana, Admiral, Magic Chef.

Fixes the issues below:

* No heat or insufficient heat.
* Too hot.
* Dryer takes to long to dry
* Won’t Start.
* The timer does advance. Shuts off too soon.
* Won’t shut off.
* Will not tumble.
* Touchpad does not respond.

The Whirlpool brand names and logos are the registered trademarks of their respective owners. Any use of the Whirlpool brand name or model designation for this product is made solely for purposes of demonstrating compatibility.

Wash your clothes immediately don’t wait any longer!