Top 10 Dryer Vent Kit

This indoor dryer vent is designed to capture the lint from your electric clothes dryer, for those unable to vent to the outside. All types of indoor dryer vents will allow heat and humidity into the room. We recommend the user allow for air circulation and ventilation when operated in confined spaces. This patented double filter system does not use water, eliminating messy cleanups. The stainless steel screen acts as a pre-filter capturing large lint particles, pet hair, etc. and can be cleaned with a sweeping motion of the hand. The polyester filter will capture the finer lint dust and can be vacuumed clean for extended use or replaced when fully loaded with lint. Replacement filters are available in packages of 6, lasting most users up to a year under normal conditions. There is a patent pending “safety vent flap” designed to open, as a reminder to clean the screen and filter. For renters or homeowners concerned with dryer lines that exceed the dryer manufacturer’s recommendations, resulting in inefficient operation and lint accumulation, this is a great solution. Saves energy in colder months by returning warm dryer air into the room. All installation hardware included. Customer supplies hose and clamps. Installation is quick and easy, instructions included. If you’ve purchased this product in the last 30 days and one or both of the side clips is broken, please reach out to [email protected] for a replacement.

Product Description

LG 3911EZ9131X Dryer Side or Bottom Venting Kit. for use with the following LG Electronics models: DLE0332W, DLE2512W, DLE3777W, DLG0332W, DLG2522W, DLG2532W, DLG3788W, DLG5932S, DLG5932W, DLG5988B, DLE2532W, DLEX3001W, DLE7177WM, DLGX2802W, DLEX3360W. Refer to your manual to ensure ordering the correct, compatible part.

From the Manufacturer

LG 3911EZ9131X Dryer Side or Bottom Venting Kit. For use with the following LG Electronics models: DLE0332W, DLE2512W, DLE3777W, DLG0332W, DLG2522W, DLG2532W, DLG3788W, DLG5932S, DLG5932W, DLG5988B, DLE2532W, DLEX3001W, DLE7177WM, DLGX2802W, DLEX3360W. Refer to your manual to ensure ordering the correct, compatible part.

iPower is the leading manufacturer of grow light systems; supplying gardeners, worldwide, for over a decade. We use the transformative power of light to make gardening more efficient and productive. In addition to HPS/MH and Ceramic MH technology, we offer digital ballasts, fluorescent, and LED lighting systems. From hobbyist to commercial applications, we offer a broad spectrum of gardening tools and equipment in hydroponics, irrigation, climate control, and structures to help your garden thrive.

iPower Ventilation Ducting is made from high quality aluminum to provide flexibility and protect against breaking during installation. Not only does the duct act as in intake and exhaust piping for active-cooled fixtures and reflectors, but also stores and dissipates heat at a steady rate, which reduces room temperature fluctuations.

Benefits of iPower Ducting:

1. This 4-inch ducting fits any standard 4-inch inline fan.
2. 3-layer thickness: Aluminum Foil + PET + Aluminum Foil.
3. Helically shaped and internally crimped galvanized steel strip.
4. Interlocking steel strips to form an air tight and leak proof system.
5. Each ducting unit includes a pair of metal clamps made from stainless steel.
6. This air duct is easy to cut using a pair of metal snips or a standard wire cutter.
7. This ducting is easy to bend to install in hard to reach spaces such as grow rooms, attics, crawl spaces, etc.
8. This ducting is made with aluminum reinforced with a spiral-wire, designed to prevent the ducting from unraveling when cut into smaller pieces.
9. Typical applications for ventilation ducting include: dryer room vents, A/C or Heater ducting, grow room ventilation and other indoor gardening applications.
10. 12-month manufacturer warranty.

Product Description

This ducting was designed for various ventilation, circulation, and heating/cooling transfer applications. It features four-layer protection, making it more durable and resistant to leaks than single-layer designs. The internal layer is a heavy-duty dual aluminum foil that is fire/flame resistant. While the outer layer is made of dual PVC thermoplastic that protects the aluminum from cuts and tears, while stopping leakage. The ducting are held together by an internal steel-wire spiral that is flexible and easy-to-install in hard to reach places. The ducting can be shorted but cutting the tube, to fit various applications. Includes two stainless steel duct clamps.

Applications

Used in conjunction with a duct fan system for various air circulation and ventilation projects including hydroponic grow rooms and tents, exhausting bathrooms and attics, transporting heating and cooling, and other installations. It is also used in the cooling of AV equipment rooms, closets, racks, and cabinets.

Product Description

This is a genuine replacement part. The model number and name for the following item is: Deflecto RVHAW4 4″ White Dryer Flapper Vent Hood.

From the Manufacturer

This is a genuine replacement part. The model number and name for the following item is: Deflecto RVHAW4 4″ White Dryer Flapper Vent Hood

Product Description

This periscope can range from 0 to 18 Inch depending on preference. It includes one male snap-lock fitting and one extra long draw-band collar. Keep in mind that any excess length can be trimmed to fit according to your needs.

From the Manufacturer

This periscope can range from 0 to 18 inches depending on preference. It includes one male snap-lock fitting and one extra long draw-band collar. Keep in mind that any excess length can be trimmed to fit according to your needs.