Top 10 Troy Bilt Pressure Washer 020245

It is the customers responsibility to make sure that this is the correct part for their unit. New vertical 7/8″ shaft pressure washer water pump for many different makes and models. SPECS: 7/8″ shaft, aluminum head, 2800 PSI, 2.3 GPM, Includes thermal release valve, chemical injector, garden hose hookup (22mm outlet), pump oil already installed, 1 year warranty against manufacturer defects. If you are not sure if this is the correct pump for your unit please send us model number off your machine and we will gladly check for you. PLEASE NOTE: Spacers may be required for installation depending on motor configuration. Spacers are used in the case that the pump arm(s) hits the engine. Pump may require longer mounting bolts due to its thicker flange, for added strength.

BRAND NEW PRESSURE WASHER PUMP. FITS MANY BRANDS SUCH AS KARCHER, GENERAC, BLACKMAX, CRAFTSMAN, BRIGGS, HONDA, POWERSTROKE, and OTHERS! 2400-2700 PSI, Flow Rating of 2.4 GPM, with 7/8″ and 3 mounting holes. INCLUDES THERMAL RELEASE VALVE. SPECS: FITS 7/8″ Inch (22.225mm) SHAFT VERTICAL CRANK ENGINES. MOUNTING BOLTS: FROM MAIN CENTER SHAFT TO EACH MOUNT BOLT IS 4″ – CENTER TO CENTER SPACING BETWEEN MOUNTING BOLTS IS: 7 11/16″ – 6 3/16″ – 6 7/16″

PARTS COMPATIBILITY:

Specific models stated in the listing are potential matches only and NOT a guarantee of compatibility.

(Even if two pieces of equipment share the same year/make/model, they can and often do have different part numbers).

The only way to ensure the correct replacement is with the OEM part number. The customer is responsible for verifying their OEM part number.

It is the customers responsibility to make sure that this is the correct item/part for their unit. If you are unsure if this is the correct item/part, please contact The ROP Shop, we would be more than happy to help you.

2400-2700 PSI, Flow Rating of 2.4 GPM, with 7/8″ and 3 mounting holes. INCLUDES THERMAL RELEASE VALVE. SPECS: FITS 7/8″ Inch (22.225mm) SHAFT VERTICAL CRANK ENGINES. MOUNTING BOLTS: FROM MAIN CENTER SHAFT TO EACH MOUNT BOLT IS 4″ – CENTER TO CENTER SPACING BETWEEN MOUNTING BOLTS IS: 7 11/16″ – 6 3/16″ – 6 7/16″

Product Description

Genuine Briggs & Stratton replacement pressure washer valve check kit used on current small frame pumps.

Troy-Bilt: 020200-0 2,700 PSI Pressure Washer, 020207-0 2,400 PSI Pressure Washer, 020207-1 2,450 PSI Pressure Washer, 020208-0 2,500 PSI Pressure Washer, 020208-1 2,600 PSI Pressure Washer, 020213-0 2,550 PSI Pressure Washer, 020240-0 2,550 PSI Pressure Washer, 020240-2 2,550 PSI Pressure Washer, 020241-0 2,600 PSI Pressure Washer, 020242-0 3,000 PSI Pressure Washer, 020242-2 3,000 PSI Pressure Washer, 020242-4 3,000 PSI Pressure Washer, 020245-1 2,200 PSI Pressure Washer, 020245-2 2,200 PSI Pressure Washer, 020293-0 2,550 PSI Pressure Washer, 020293-1 2,550 PSI Pressure Washer, 020294-0 3,000 PSI Pressure Washer, 020337-0 2,550 PSI Pressure Washer, 020316-0 3,000 PSI Pressure Washer, Briggs and Stratton, 020212-0 2,800 PSI Pressure Washer, 020215-0 2,450 PSI Pressure Washer, 020216-0 2,600 PSI Pressure Washer, 020219-0 2,450 PSI Pressure Washer, 020220-0 2,600 PSI Pressure Washer, 020222-1 1,950 PSI Pressure Washer, 020223-0 2,400 PSI Pressure Washer, 020224-0 2,700 PSI Pressure Washer, 020224-1 2,700 PSI Pressure Washer, 020226-0 2,650 PSI Pressure Washer, 020227-0 2,400 PSI Pressure Washer, 020244-1 2,050 PSI Pressure Washer, 020228-1 2,200 PSI Pressure Washer, 020229-0 2,450 PSI Pressure Washer, 020250-0 2,550 PSI Pressure Washer, 020255-0 2,600 PSI Pressure Washer, 020261-0 2,200 PSI Pressure Washer, 020270-0 3,000 PSI Pressure Washer, 020273-0 2,550 PSI Pressure Washer, 020288-0 2,200 PSI Pressure Washer, 020291-0 2,500 PSI Pressure Washer, 020291-1 2,500 PSI Pressure Washer, 020301-0 2,500 PSI Pressure Washer, 020302-0 2,800 PSI Pressure Washer, 020319-0 2,550 PSI Pressure Washer, 020302-1 2,800 PSI Pressure Washer, 020320-0 3,000 PSI Pressure Washer, 020303-0 3,000 PSI Pressure Washer, 020321-0 2,900 PSI Pressure Washer, 020306-0 2,500 PSI Pressure Washer,020306-1 2,500 PSI Pressure Washer

From the Manufacturer

Genuine Briggs & Stratton replacement pressure washer valve check kit used on current small frame pumps.

In some instances, the pump may need to be removed to change engine oil. 

Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. 

These bolts and spacers are not included, but may be purchased at your local hardware store.  

Common bolt sizes: Two – 5/16″ 18 x 2 1/2″ , One – 5/16″ 18 x 3 1/2″

PARTS COMPATIBILITY:

Specific models stated in the listing are potential matches only and NOT a guarantee of compatibility.

(Even if two pieces of equipment share the same year/make/model, they can and often do have different part numbers).

The only way to ensure the correct replacement is with the OEM part number. The customer is responsible for verifying their OEM part number.

It is the customers responsibility to make sure that this is the correct item/part for their unit. If you are unsure if this is the correct item/part, please contact The ROP Shop, we would be more than happy to help you.

Please review all product information to ensure that this product is compatible with your unit./p>

Before processing a product for warranty, it must be verified as the correct part by the OEM part number(s) and/or model number(s). If you have any questions or concerns, please ask.

A Message to the Customer

The ROP Shop staff constantly strives to provide clear and concise product information. We understand that sometimes it can be difficult to confirm product compatibility. It is your responsibility to confirm this is the correct product you need; therefore, we encourage all customers to fully review the information provided in this listing prior to purchase. Any specific models stated in the listing are potential matches only and not a guarantee of compatibility. Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for:

Model and/or Sub-model

Spec and/or Type Number

Code and/or Serial Number

Year

Engine Horsepower

Our knowledgeable product specialists are always willing to help you verify product fitment. Stay rugged, my friend.

-The ROP Shop Staff

In some instances, the pump may need to be removed to change engine oil. 

Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. 

These bolts and spacers are not included, but may be purchased at your local hardware store.  

Common bolt sizes: Two – 5/16″ 18 x 2 1/2″ , One – 5/16″ 18 x 3 1/2″

PARTS COMPATIBILITY:

Specific models stated in the listing are potential matches only and NOT a guarantee of compatibility.

(Even if two pieces of equipment share the same year/make/model, they can and often do have different part numbers).

The only way to ensure the correct replacement is with the OEM part number. The customer is responsible for verifying their OEM part number.

It is the customers responsibility to make sure that this is the correct item/part for their unit. If you are unsure if this is the correct item/part, please contact The ROP Shop, we would be more than happy to help you.