Top 10 Kegerator System Coupler Ball Lock

This is a Kegco commercial grade lever Handle keg coupler. The KT85D-L is compatible with all domestic brand kegs. This keg tap works with all American “D” system sankey kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body with a stainless steel probe. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg.

Warm Tips: 
  The type of coupling configuration is the area that must match. Keg couplers are categorized by letters (I.e., S, G, U, D).  
Each beer keg requires one and only one of these couplers. American beers typically use a D coupler. European beers typically uses a S coupler 
 
How to check whether the sankey d keg coupler leaks or not？ 
The best way to check is to spray it with soapy water when it is under pressure and look for bubbles.
There is a white lug under the gas in nipple that is held on by a hex nut. That prevents backflow into the regulator and also acts as a seal.
It’s possible that that hex nut is not tightened enough or that check valve is misaligned, causing a bad seal

Package Includes:  
1* Keg Coupler D System

“D” system is the most common system available in the U.S., also known as American Sankey. It is used by all the major breweries.

  How to use the beer keg coupler？
You also need a gas tank/regulator/beer faucet/hose to get the gas from the regulator to the coupler and dispense your beer. And then tap the sankey coupler to keg, pull the handle out and then down to lock

How to check whether the sankey d keg coupler leaks or not？
The best way to check is to spray it with soapy water when it is under pressure and look for bubbles.
There is a white lug under the gas in nipple that is held on by a hex nut. That prevents backflow into the regulator and also acts as a seal.
It’s possible that that hex nut is not tightened enough or that check valve is misaligned, causing a bad seal

Features:
System: D Keg Coupler
Body Material: 304 Stainless steel
Probe Material: 304 Stainless steel
Handle Color: Black
Handle Style: 304 Stainless steel – Lever
Gas Port: 3/8″ O.D. Barb (To fit 5/16″ I.D. Gas Hose)
Beer Port: 5/8″ Thread (U.S. Beer Industry Standard)
pressure relief valve: pressure relief valve releases at 55 PSI
Short handle is ideal for the smaller diameter 1/6 kegs

Package Includes:  
1* 304 Stainless Steel Keg Coupler

KEG COUPLER ADAPTER BALL LOCK DISCONNECT SET

FEATURES:
Package: Keg Coupler Adapter for Gas and Liquid, Ball Lock Disconnect Set;
Material: Stainless Steel Keg Coupler Adapter, Plastic Material for Ball Lock Quick Disconnect, Stainless Steel for Swivel Nuts;
Identify: the Gas Post has a Deep Subtle Etched Line, it connect the Gray Ball Lock Disconnect; the Liquid Post has no Line, it connect the Liquid Ball Lock Disconnect;

HOW TO USE:
Screw the Ball Lock Conversion Kits onto the Keg Coupler;
Attach Ball Lock Gas Disconnect and Liquid Quick Disconnect to the Keg Coupler Adapter;
Connect the Beer Line and Gas Line to the Ball Lock Disconnect, Use the Worm Clamp will guarantee have no Leak Problem;
All Done, you can toggle between commercial and homebrew beer very easily;
Quality Guarantee, Money Return or Free Replacement.

Bigger isn’t always better. If you’re limited with space inside your fridge, this US Sankey (D System) keg coupler with a short handle may be just what you need to complete your draft beer system.The keg coupler connects your CO2 tank to your keg. The gas line attaches to the side hose nipple, which directs pressurized gas into the keg. This allows the beer to be pushed up out of the keg and through your plastic beer line. Featuring a lever handle that is 1/2-inch shorter than a standard coupler, this item is ideal for slim 1/4 kegs with high walls around the coupler fitting. A half inch might not sound like much, but that’s 20% shorter than a standard coupler, and will make a huge difference depending on the keg you’re tapping. Designed to fit US Sankey (D system) keg valves, this premium coupler will work with the vast majority of North American beers, including Budweiser, Michelob, Miller Lite, Milwaukee’s Best, Coors Light, Killian’s, Sam Adams, Molson, Labatt, and more. Be sure to review our complete keg coupler list to check which system your favorite beer uses. Made of brass with nickel-plating, this keg coupler is durable and simple to install. The blue plastic handle is very easy to operate. For your safety, the coupler features an internal relief device that prevents dangerous pressure build-up that can damage your system. Features: US Sankey (D System) keg coupler. Connects the gas tank, keg, and beer lines to allow for pressurized dispensing. Lever handle that’s ½ inch shorter than standard keg coupler. Ideal for installation in tight spaces or slim 1/4 kegs. Works for majority of North American beers. Made of nickel-plated brass. Internal safety relief device. Easy to install and use. Perfect for home or commercial use. Specs: Fits D System keg taps valves. Dimensions: 6 1/2”W x 3 1/4”H x 2 1/2”D. Handle dimensions: 2”L.

★ 100% new brand Ferroday stainless steel keg coupler adapter kit premium 304 stainless steel Made posts are anti-corrosion, rust-proof, solid and durable. features: ★ The thread of gas post & liquid post: FPT 5/8″; fits all The a D S G type keg coupler. ★ can be easily attached to air and beer line fittings. ★ help easily convert a Sankey system to a Ball lock system in seconds. ★ Our keg coupler adapter kit will be locked in place perfectly. ★ no more mess with the tubing connections. note: this keg coupler adapter kit will work for a 5/8″ Thread soda keg, but not a soda bottle. ★instruction: ★ screw these conversion plugs onto your keg coupler and then tighten them slowly and properly; please make sure you didn’t overtighten it. click the “add to cart”, make it easy to toggle between your commercial and homebrew beers, enjoy both mass-produced commercial beer and your own homebrew creations. buy one, and you won’t be regret! we offer you a 1-year money back . package includes: 1* gas post 1* liquid post

★ The rubber seal inside is sturdy
★ No leaks at all and installation was very easy on the sanke keg
★ Easily swap between commercial kegs to your homebrew kegs
★ Keg coupler adapter kit includes both a gas and a liquid post

It’s never been easier to dispense both store bought beer and your own home brew off of the same system. This Sankey to ball lock keg coupler liquid post adapter allows you to switch your beer line between commercial kegs and Cornelius home-brew kegs in seconds. It’s as simple as screwing the conversion fitting onto your Sankey coupler and then installing your liquid-out ball lock coupler on the post. If you want to make use of both sides of your Sankey coupler ball lock, you will also need a gas post. There are many advantages to this beyond just being able to switch back and forth between Sanke kegs and corny kegs. Probably the biggest advantage is you don’t have to mess with the tubing connections like you would on a standard Sanke conversion kit. Also, you don’t have to continuously tap and untap the Sanke keg when switching back and forth. These Sankey to ball lock disconnects are the best solution for dispensing several beers you have on tap, at once.