Top 10 How To Make Green Beer In A Kegerator

This is a Kegco commercial grade lever Handle keg coupler. The KT85D-L is compatible with all domestic brand kegs. This keg tap works with all American “D” system sankey kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body with a stainless steel probe. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg.

“D” system is the most common system available in the U.S., also known as American Sankey. It is used by all the major breweries.

  How to use the beer keg coupler？
You also need a gas tank/regulator/beer faucet/hose to get the gas from the regulator to the coupler and dispense your beer. And then tap the sankey coupler to keg, pull the handle out and then down to lock

How to check whether the sankey d keg coupler leaks or not？
The best way to check is to spray it with soapy water when it is under pressure and look for bubbles.
There is a white lug under the gas in nipple that is held on by a hex nut. That prevents backflow into the regulator and also acts as a seal.
It’s possible that that hex nut is not tightened enough or that check valve is misaligned, causing a bad seal

Features:
System: D Keg Coupler
Body Material: 304 Stainless steel
Probe Material: 304 Stainless steel
Handle Color: Black
Handle Style: 304 Stainless steel – Lever
Gas Port: 3/8″ O.D. Barb (To fit 5/16″ I.D. Gas Hose)
Beer Port: 5/8″ Thread (U.S. Beer Industry Standard)
pressure relief valve: pressure relief valve releases at 55 PSI
Short handle is ideal for the smaller diameter 1/6 kegs

Package Includes:  
1* 304 Stainless Steel Keg Coupler

Design your own tap handle. This handle is unfinished wood to allow full decoration and design for your unique company or specific brew. The handle measures 6.5″ high, 15/16″ thick, and 2.5″ tapering to 1.5″ wide and is made out out of locally sourced hard maple in Middlebury, Vermont.

To prove authenticity, all Maple Landmark brand tap handles sold on Amazon are lightly engraved with a logo on the top.

The AcuRite 00613 Indoor Humidity Monitor provides all the home comfort information you need, at a glance. Featuring a precision indoor thermometer and hygrometer, and an easy-to-read LCD display, it shows current indoor humidity and temperature, plus daily high and low records. A handy home comfort icon makes it effortless to tell if your indoor humidity is too high, too low, or “OK.” Multiple mounting options include a convenient clip, magnets for attaching to a metal surface like a refrigerator, or you can stand it upright on a tabletop. Limited one-year warranty. It’s more than accurate, it’s AcuRite.

Main features:
*Plug and play design, easy to use, can control temperature and humidity at the same time
* Dual relay output, be able to connect with refrigeration and heating equipment at the same time; be able to connect with humidifier and dehumidifier equipment at the same time; be able to connect with refrigeration/ heating and humidifier/dehumidifier equipment at the same time
* Support reading with Centigrade or Fahrenheit unit
* Maximum output load: 1800W (120V, 15A)
*Dual display window, be able to display measured temperature/humidity and set temperature/humidity at the same time
* Supporting Temperature and humidity calibration
* Compressor delay protection for refrigeration control
* High and low temperature/humidity alarms are available
* Over-temperature/humidity and sensor fault alarm
* Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change. Same as humidity control
* Support setting 12 different temperatures in 12 different time period

Specification:
Maximum output load：120Vac, 60Hz, 15A, 1800W
Temperature measurement range：-40℃~100℃/-40℉~212℉
Temperature display accuracy：0.1℃/℉(<100℃ )="">
Relative humidity measurement range：5~99%RH
Humidity display accuracy：0.1%RH
Display unit：temperature：Celsius °C or Fahrenheit °F；humidity：%RH
Ambient temperature：-20℃~60℃/-4℉~140℉
Storage environment：temperature：0℃~60℃/32℉~140℉；humidity：20~80%RH(Unfrozen or condensation state )
Temperature sensor cable Length: 2m（78.74in）
Humidity sensor cable Length: 2m（78.74in
Input Power Cable Length: 1.5m（59.05in）
Unit Dimension: 20.8cm*8.5cm*3.5cm（8.19*3.35*1.38in）
Warranty: 2 year

Package Content: 
1x ITC-608T temperature and humidity controller;
1x Temperature sensor
1x Humidity sensor
1x Manual

Liquid Beer Line Cleaning Kit, Gravity Feed Detailed, illustrated , easy to use instructions included! Featuring 8 oz. bag of “Brew Clean” – a safe, and easy powered form cleaner, Made in the USA! Assembled in the USA from Domestic and foreign components. Metal Faucet Wrench, Made in the USA! Bottle is marked in both ounces and ML and is Made in the USA. Ball Lifter for holding check valve ball on beer coupler (also called tap) open so liquid can pass through beer coupler (no need to remove like some cleaning kits!) CMBecker black plastic connection for connecting the cleaning line directly to the tower or standard shank High quality faucet brush is included. Info on assistance is included in instructions should you need help with this product. We don’t think you will after you see the Instructions! Shipping offer is valid only to residents of contiguous US.

Easy way to keep you faucet spout clean without extra effort. Just insert the brush into spout overnight or when faucet is not in use. Each time it is inserted and pulled out , the brush cleans the spout from inside. The plug keeps the spout covered and keeps away bugs and fruit flies. It is designed to fit most Beer faucets including standard ones as well as Per licks (including the new 630). Features Stainless Steel core to prevent rusting. Wider Brush to fit securely.