Top 10 How To Clean Out Kegerator Drip Line

The micro-line drip line with drip emitters is extruded micro tubing with flow labyrinth in-line emitters molded into the inside wall of the micro tubing. The inline drip emitter is built with a large filter along the cross section of the drip emitter to ensure that moving particles on the bottom of the micro tubing from entering the labyrinth water path, ensuring trouble free operation and long life. This tubing has emitters spaced 6″ apart for your convenience. Nominal flow rates: .52 GPH (2 L/H) at 15 PSI (1 BAR) Dripper color code: blue Operating pressure: 10-25 PSI (.7-1.7 BAR) Dripline color code: black or brown Materials: Dow FINGERPRINT DFDA-7510 NT linear low-density polyethylene resin Size: 1/4″ (6 mm) (.170″ ID x .250″ OD) (4.445 mm ID x 6.35 mm OD) Spacing: 6″, 9″ or 12″ (15 cm, 23 cm, or 30 cm) Minimum bending radius: 1′ (.3 m) Filter requirement: minimum of 150 mesh

Product Description

Rain Bird ET63-100S Drip Irrigation Pressure Compensating 1/2″ (.700″ outside diameter) Emitter Tubing, 18″ Emitter Spacing, 100′ Roll, Brown. Rain Bird’s emitter tubing works like a soaker hose; only better because it doesn’t clog and requires no maintenance! Once installed, your plants and landscaped areas are perpetually watered as intended. This rugged and flexible 1/2” Drip irrigation tubing waters plants uniformly with pre-installed pressure compensating .09 gallon-per-hour emitters spaced every 18″. Rain Bird’s pressure-compensating technology ensures all plants receive the same amount of water regardless of their position along the tubing run. Patented emitters are designed for clog-resistant flow to ensure even, reliable watering with zero maintenance. Industry leading flexibility allows tighter turns with fewer elbows for fast, easy installation. Professional-grade for unmatched resistance to chemicals, algae growth and UV damage. Unique Micro-Porous design creates an ultra-tight connection; tubing expands over fittings then shrinks making it almost impossible to remove without cutting. Designed to be used for both underground installation covered with dirt or mulch; or above ground where its brown coloring blends with natural colors. Compact coiling method allows tubing to remain coiled as its extracted; making it easy to use, store and eliminates waste. Just cut, place and connect in any arrangement with Rain Bird fittings and stakes; sold separately. Fittings available in Barbed: coupling, elbow, tee, end closure, and valve; or Easy Fit Compression: coupling, elbow, tee, and end cap coupler with flush feature. Stakes available in galvanized and plastic models. Easily connect to a faucet, garden hose or convert an existing underground sprinkler head with Rain Bird connection kits sold separately: FCKIT1PK, RCKIT-1PS-1PS. Specifications: outside diameter 0.700″; inside diameter 0.580″; wall thickness 0.60”; operating pressure 8.5 to 60 PSI. Emitter tubing also available (sold separately) in 50 roll (ET63918-50). Rain Bird “The Intelligent Use of Water”

From the Manufacturer

Rain Bird Corporation is a privately held company founded in 1933 during the agricultural boom in California. We’re recognized as the #1 manufacturer and provider of irrigation products and services in the world. With sales offices around the globe; we offer over 4,000 water-saving irrigation products in more than 130 countries. Since the very beginning, Rain Bird has produced and offered the industry’s broadest range of high-quality irrigation products for: farms, golf courses, sports arenas, commercial developments and homes. Over the past 80-years Rain Bird has received more than 450 patents worldwide. Including the first one for irrigation in 1935 for our original impact-drive sprinkler (U.S. Patent #1,997,901) which revolutionized agricultural food-production and ushered in a new era in irrigation worldwide. In 1990 this original impact sprinkler was designated a historic landmark by the American Society of Agricultural Engineers. Our products cover all aspects of irrigation…timers/controllers, pop-up rotary sprinklers, pop-up spray head sprinklers, sprinkler nozzles, irrigation valves, Drip irrigation, drainage and much more. These products have all been chosen and installed worldwide in the largest and most prestigious projects for residential, commercial, agricultural and golf course irrigation. Rain Bird is committed to The Intelligent Use of Water™ with our commitment extending beyond products to education, training and services for the industry and the community. Our legacy is to design and manufacture only products of the highest value and quality. We’re grateful to have received numerous recognition awards from many of our valued partners. Rain Bird “The Intelligent Use of Water”

Rain Bird On Surface Dripline XFD 0.9-GPH 12″-SPC 250-FT

Product Description

“Rain Bird ET256-50S Drip Irrigation Pressure Compensating 1/4″” Emitter Tubing, 6″” Emitter Spacing, 50′ Roll, Brown. Rain Bird’s emitter tubing works like a soaker hose; only better because it doesn’t clog and requires no maintenance! Once installed, your plants and landscaped areas are perpetually watered as intended. This rugged and flexible 1/4” Drip irrigation tubing waters plants uniformly with pre-installed, pressure compensating .08 gallon-per-hour emitters spaced every 6″”. Rain Bird’s pressure-compensating technology ensures all plants receive the same amount of water regardless of their position along the tubing run. Each emitter features two outlet holes on either side of tubing (180° apart) that won’t clog and require zero maintenance. Tubing is easy to unroll and stake in gardens, flower beds, ground cover or other landscaped areas. Compact coiling method allows tubing to remain coiled as its extracted; making it easy to use, store and eliminates waste. Industry leading flexibility allows tighter turns with fewer elbows for fast, easy installation. Perfect for small, narrow and tight planting areas, as well as areas with tight curves or many switchbacks. Professional-grade for unmatched resistance to chemicals, algae growth and UV damage. Unique Micro-Porous design creates an ultra-tight connection; tubing expands over fittings then shrinks making it almost impossible to remove without cutting. Designed to be used for both underground installation covered with dirt or mulch; or above ground where its brown coloring blends with natural colors. Compatible with all brands of 1/4” barbed Drip fittings. High-quality Rain Bird fittings (sold separately) are available in coupling, elbow, tee, plug and valve models; plus stakes in plastic and galvanized versions. Specifications: outside diameter 0.25″”, inside diameter 0.17″”, wall thickness 0.04”. Operating pressure 8.5 to 60 psi. Emitter tubing also available (sold separately) in 12″” spacing as model: ET25-50S2. Rain Bird “”The Intelligent Use of Water”” “

From the Manufacturer

Rain Bird Corporation is a privately held company founded in 1933 during the agricultural boom in California. We’re recognized as the #1 manufacturer and provider of irrigation products and services in the world. With sales offices around the globe; we offer over 4,000 water-saving irrigation products in more than 130 countries. Since the very beginning, Rain Bird has produced and offered the industry’s broadest range of high-quality irrigation products for: farms, golf courses, sports arenas, commercial developments and homes. Over the past 80-years Rain Bird has received more than 450 patents worldwide. Including the first one for irrigation in 1935 on our original impact-drive sprinkler (U.S. Patent #1,997,901) which revolutionized agricultural food-production and ushered in a new era in irrigation worldwide. In 1990 this original impact sprinkler was designated a historic landmark by the American Society of Agricultural Engineers. Our products cover all aspects of irrigation…timers/controllers, pop-up rotary sprinklers, pop-up spray head sprinklers, sprinkler nozzles, irrigation valves, Drip irrigation, drainage and much more. These products have been chosen and installed worldwide in the largest and most prestigious projects for residential, commercial, agricultural and golf course irrigation. Rain Bird is committed to The Intelligent Use of Water™ extending beyond products to education, training and services for the industry and the community. Our legacy is to design and manufacture only products of the highest value and quality. We’re grateful to have received numerous recognition awards from many of our valued partners. Rain Bird “The Intelligent Use of Water”

The micro-line drip line with drip emitters is extruded micro tubing with flow labyrinth in-line emitters molded into the inside wall of the micro tubing. The inline drip emitter is built with a large filter along the cross section of the drip emitter to ensure that moving particles on the bottom of the micro tubing from entering the labyrinth water path, ensuring trouble free operation and long life.