Top 8 Set Water Temp On 50 Gallon Ao Smith Hot Water Heater

Professional classic® tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.

NOTE : 11Kw at 220 is equal to 13kw at 240.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

The Eccotemp i12 Liquid Propane 3 GPM Tankless Water Heater has a new revolutionary design, making it unlike any other tankless water heater on the market today. The Eccotemp i12-LP is perfect for vacation cabins, cottages, and smaller homes. This model features sleek black tempered glass paneling, fully automatic temperature controls for precision, and a touch screen with an LED temperature display that shows output temperature and GPM flow. The i12-LP is also equipped with child locking technology. The Eccotemp i12-LP is a liquid propane powered, indoor model designed for small to medium hot water production where you need more than one hot water application at the same time. This model also offers a 35-40 degree Fahrenheit temperature rise when operating at a flow rate of 4 GPM and a 77-degree Fahrenheit temperature rise at 1.5 GPM. This bundle comes with a horizontal stainless steel vent kit, ready to install and with its 110-volt UL listed power cord powering the internal exhaust fan and digital display. The i12 only pulls about 2 watts while idle and 1.07 Amps during operation, making it an ideal energy efficient appliance.

Product Features

• Sleek, modern design with black tempered glass front panel
• Equipped with child locking technology
• Pulls about 2 watts idle and 1.07 Amps during operation
• Fully automatic temperature controls
• Horizontal Stainless Steel vent kit included
• Perfect for vacation cabins, cottages, and smaller homes
• Hot water capacity range: 0.6 – 4.8 GPM; Maximum / Minimum gas rate: 25,000 – 80,000 BTUs

What’s in the box?

• 1 x 2 1/2″ 90 degree Elbow with Backflow Preventer
• 1 x Wall Thimble
• 1 x 2 1/2″ x 20″ Termination Pipe
• 1 x Instruction Manual
• 1 x 110 volt UL listed power cord

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for one bathroom residences in climates where incoming water temperature is 67°F and above. This model is well suited for heating nearly 1.5 gallons per minute to 105°F at that inlet temperature, which is the equivalent of one water saver shower head. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 8 requires a minimum 100 amp electrical panel for installation with (1) 40 amp double pole breaker connected to (1) set of #8 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

Product Description

Features Two Models in One: Switchable between 9,000 and 12,000 Watts via a jumper during installation.

From the Manufacturer

Features Two Models in One: Switchable between 9,000 and 12,000 Watts via a jumper during installation

Product Description

Double-reinforced rubber-and-vinyl construction resists kinks, abrasion and the toughest conditions.

From the Manufacturer

Gilmour’s commercial rubber/vinyl hose is industrial strength for commercial use and features 6 ply construction with 500 psi burst strength.

This generator cord will enable you to connect to any generator model featuring a NEMA 14-50R (50 Amps, 125/250 Volts, straight blade). It will also allow you to connect in tandem with an inlet/transfer switch box featuring a NEMA SS2-50P (50 Amps, 125/250 Volts, locking style || CS6365). With a maximum wattage rating of 12,500 Watts and a jacket rating of STW for extra-heavy duty usage, this just may be the only generator cord you need for years to come. Limited 1-year warranty.

Product is intended for use with generators only. Do not leave product connected to a power-source outside of normal use. Ensure connection points are free from moisture/debris.