Nowadays, there are so many products of ao smith heat pump water heater installation in the market and you are wondering to choose a best one.You have searched for ao smith heat pump water heater installation in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ao smith heat pump water heater installation which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
621 reviews analysed
1. Rinnai RU160iN Sensei Super High Efficiency Tankless Water Heater, 9 GPM – Natural Gas: Indoor Installation
Feature
- RU160iN Sensei SE+ Super High Efficiency Tankless Hot Water Heater – Natural Gas: Indoor Installation Only
- Up to 9 GPM hot water flow rate (varies by groundwater temp)
- 15,000 BTU (Minimum) / 160,000 BTU (Maximum)
- Circ-Logic technology allows you to set recirculation patterns that coincide with your typical habits. Hot water is available when you need it!
- Endless hot water for your entire home
- Residential Factory Warranty – 120 months (heat exchanger), 12 months (labor), 60 months (parts)
Description
Enjoy an endless supply of hot water with the SENSEI™ RU160iN Super High Efficiency Plus condensing tankless water heater from Rinnai. Only the size of a small suitcase, the natural gas RU160iN model is compact, easy-to-install and perfect for indoor locations.
2. Flextrol FTH30 Hydronic Expansion Tank 2.1 Gallons for Closed Hot Water Heating Systems, 1/2 Inch MIP Connection, Gray
Feature
- Hydronic Expansion Tanks Are Diaphragm Type Tanks Designed to Keep System Pressures Below Relief Valve Settings
- Hydronic (Forced Hot Water) Expansion Tanks Absorb the Expansion of Water in Residential or Commercial Hydronic Heating and Cooling Systems
- Low Profile Tank Design with Full Membrane Depth Eliminates Stretching of Diaphragm, Providing Increased Life Cycle
- Hydronic Non-Potable Expansion Tank for Closed Hot Water Heating Systems, Boilers
- MIG Welding Eliminates Interior Rough Spots and Sharp Edges
- High Grade Steel Construction
- Made In Italy
- Certified Synthetic SBR Rubber Diaphragm
Description
What is Hydronic Expansion?
Hydronic expansion tanks are diaphragm type tanks designed to keep system pressures below relief valve settings. Hydronic expansion tanks absorb the expansion of water in residential or commercial hydronic (forced hot water) heating and cooling systems. Without hydronic expansion tanks, the system will quickly over-pressurize resulting in added stress to the various system components. Hydronic expansion tanks protect safety valves from failing or wearing out quickly, avoids valve stem and ball seal leaks, prevents wasted BTU’s and vastly extends water heater life.
Technical Features
- Certified synthetic SBR rubber diaphragm
- MIG welding eliminates interior rough spots and sharp edges
- Each tank is factory leak tested to ensure tank integrity
- All diaphragms designed to maximize drawdown
- External baked epoxy-polyester coating provides a durable appliance finish
- Welded side outlet allows easy and quick installation
- Protected pre charge valve eliminates potential leak path
- Low profile tank design with full membrane depth eliminates stretching of diaphragm, providing increased life cycle
Additional Description
- Shell: Carbon Steel
- Connection: Carbon Steel
- Diaphragm: SBR Synthetic Rubber
- Color: Gray
Operating Conditions
- Max. Operating Pressure: 75 PSI
- Operating Temperature: 210 Degrees Fahrenheit
- Factory Precharge: 12 PSI
- Warranty: 1 Year
Specifications
- Model Number: FTH15
- Tank Size: 2.1 Gallons
- Tank Weight: 4.6 Pounds
- Connection Size (National Pipe Thread): 1/2" Male Iron Pipe (MIP)
- Dimensions (LxWxH): 9" x 9" x 13"
- Acceptance Volume: 1.4 Gallons
- UPC Code: 80459513060
3. Rheem UV11695 Electric Thermostat
Feature
- For best results, use only Rheem replacement parts for repairing your Rheem Water Heater
- Manufacturer: TOD, Manufacturer Series: 59T, High Limit Control: Not Included, Thermostat Adjustment Range (F): 90 to 150
- Thermostat Tolerance (F): +/- 5, Thermostat Differential (F): 5 to 15, Thermostat Contact Configuration: SPST
- Kits which contain this part: UV11695MC
Description
Product Description
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
From the Manufacturer
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
4. Rinnai RL Series HE+ Tankless Hot Water Heater: Indoor Installation
Feature
- Endless hot water for your entire home
- RL94iN HE+ High Efficiency Tankless Hot Water Heater – Natural Gas: Indoor Installation Only
- Up to 9.4 GPM hot water flow rate (varies by groundwater temp)
- Circ-Logic technology allows you to set recirculation patterns that coincide with your typical habits. Hot water is available when you need it!
- Residential Factory Warranty – 120 months (heat exchanger), 12 months (labor), 60 months (parts).10,300 BTU (Minimum) / 199,000 BTU (Maximum)
Description
Product Description
Our high-efficiency plus RL models, offer Rinnai’s most advanced technology in non-condensing tankless water heaters. You’ll enjoy the endless hot water and energy savings you expect, with the addition of Wi-Fi monitoring and recirculation technology for faster hot water delivery.
From the Manufacturer
The R94LSi lets you enjoy continuous hot water for up to five plumbing and appliance outlets simultaneously and always at a consistent, pre-set temperature. With a capacity of up to 9.4 gallons of hot water per minute (GPM), the R94LSi still delivers up to 40% energy savings and significant space savings. This compact, interior-mount unit vents directly to the outside with a concentric venting system.
5. Rinnai V65IN 6.6 GPM Indoor Low NOx Tankless Natural Gas Water Heater
Description
Product Description
Features ENERGY STAR Qualified Energy Factor of .82 for Natural Gas and Propane Certified for Installation in Manufactured (Mobile) Homes Leak detection shuts off water to unit to limit property damage Enhanced scale detection lessens possibility of serious, long-term damage to unit Temperature lock prevents accidental or unauthorized changes to water temperature Complies with South Coast Air Quality Management District 14 ng/J or 20 ppm NOx emission levels Rinnai Value Series Tankless Water Heater Product Warranty Dimensions Width: 14 Inches Height: 23 Inches Depth: 9 Inches Weight 45.6 Pounds Ignition Direct Electronic Hot Water Capacity 0.26 to 6.6 GPM Minimum Activation Rate 0.4 GPM Minimum/Maximum Gas Rate (Input BTUs ) 10,300 150,000 Energy Factor 0.82 for Natural Gas and Propane Energy Star Yes Approved Gas Types Natural Gas or Propane Temperature Settings 98F – 140F with MC-91-2US 98F – 160F with MCC-91-2US Type of Controller MC-91-2US (included) MCC-91-2US (optional for Hydronic Applications) MC-100V-1US Deluxe Controller (optional) BC-100V-1US Bathroom Controller (optional) Ultra Lox NOx Yes Electrical AC 120 Volts, 60 Hz Electrical Consumption Normal: 76 Watts Standby: 2 Watts Anti-Frost Protection: 120 Watts Service Connections Gas Supply: 3/4 Inch MNPT Cold Water Inlet: 3/4 Inch MNPT Hot Water Outlet: 3/4 Inch MNPT. Turn off gas supply and 120 V power supply
From the Manufacturer
Features ENERGY STAR Qualified Energy Factor of .82 for Natural Gas and Propane Certified for Installation in Manufactured (Mobile) Homes Leak detection shuts off water to unit to limit property damage Enhanced scale detection lessens possibility of serious, long-term damage to unit Temperature lock prevents accidental or unauthorized changes to water temperature Complies with South Coast Air Quality Management District 14 ng/J or 20 ppm NOx emission levels Rinnai Value Series Tankless Water Heater Product Warranty Dimensions Width: 14 Inches Height: 23 Inches Depth: 9 Inches Weight 45.6 Pounds Ignition Direct Electronic Hot Water Capacity 0.26 to 6.6 GPM Minimum Activation Rate 0.4 GPM Minimum/Maximum Gas Rate (Input BTUs ) 10,300 150,000 Energy Factor 0.82 for Natural Gas and Propane Energy Star Yes Approved Gas Types Natural Gas or Propane Temperature Settings 98F – 140F with MC-91-2US 98F – 160F with MCC-91-2US Type of Controller MC-91-2US (included) MCC-91-2US (optional for Hydronic Applications) MC-100V-1US Deluxe Controller (optional) BC-100V-1US Bathroom Controller (optional) Ultra Lox NOx Yes Electrical AC 120 Volts, 60 Hz Electrical Consumption Normal: 76 Watts Standby: 2 Watts Anti-Frost Protection: 120 Watts Service Connections Gas Supply: 3/4 Inch MNPT Cold Water Inlet: 3/4 Inch MNPT Hot Water Outlet: 3/4 Inch MNPT
6. Rheem SP10869PH Screw-In 240-volt by 5500-watt Element, Premium Resistored Stainless Steel
Feature
- For best results, use only Rheem replacement parts for repairing your Rheem Water Heater
- Watt Density Classification: MWD, Input Voltage (V): 208, Input Voltage (V): 240, Wattage at 208V (W): 4130
- Watt Density at 208V (W/sq. in.): 85, Wattage at 240V (W): 5500, Watt Density at 240V (W/sq. in. ): 113, Cold Resistance (ohms): 10.50
- Element Diameter (in.): .316, Element Length – Flange to Tip (in.): 13.47, Mounting Type: Threaded, Actual Thread Size – Outside Diameter(in.): 1-9/32
- Thread Type Series Designation: NPSM, Configuration: Fold back, Nominal Thread Size – (in.): 1, Threads per Inch: 11-1/2
Description
Product Description
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
From the Manufacturer
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
7. Rinnai RL Series HE+ Tankless Hot Water Heater: Outdoor Installation
Feature
- Endless hot water for your entire home
- RL75eP HE+ High Efficiency Tankless Hot Water Heater – Propane: Outdoor Installation Only
- Up to 7.5 GPM hot water flow rate (varies by groundwater temp)
- Circ-Logic technology allows you to set recirculation patterns that coincide with your typical habits. Hot water is available when you need it!
- Residential Factory Warranty – 120 months (heat exchanger), 12 months (labor), 60 months (parts)
8. Rinnai 224087PP Condensing Vent Pipe Extension, 10-Inch
Feature
- Engineered especially for gas appliance venting
- Positive fit and lock allows for installation assurance
- Two layers of pipe equals two layers of protection
- Seals at every joint expand and contract with weather and temperature changes, so there’s no flexing or cracking in the venting
- No flammable, messy or harmful glues, cements, or solvents are used
Description
From the Manufacturer
Rinnai RCi Series Tankless Water Heaters utilize concentric venting with an inner pipe that is designed to withstand varying flue temperature conditions that may be experienced over the life of a condensing product. The Ubbink Rolux condensing concentric vent system is considered part of the direct vent tankless water heater, and has been tested and approved with the appliance by a third party testing agency.
9. Takagi T-H3-DV-N Condensing High Efficiency Natural Gas Indoor Tankless Water Heater, 10-Gallon Per Minute
Description
Product Description
With gas inputs of 199,000 BTU, the T-H3 can produce enough hot water for four bathrooms in warmer climates or three baths in colder climates.
From the Manufacturer
With gas inputs of 199,000 BTU, the T-H3 can produce enough hot water for four bathrooms in warmer climates or three baths in colder climates.
10. Rectorseal 25790 1-3/4-Ounce Tube No.5 Pipe Thread Sealant
Feature
- Rector seal 5 Pipe Thread Sealant Multi-Purpose, 1.75 Oz. – 152035
- This is highly durable
- This is manufactured in united states
- A soft setting, slow drying thread sealant
- It has withstood the test of time in a variety of uses and is widely known as the -Inch standard of the industry-Inch
- Its low coefficient of friction allows tighter joint makeup with lower torque
- It also breaks out easily without galling, seizing, or damaging threads
- It is excellent for service where immediate pressurization is necessary
- A soft setting, slow drying thread sealant
- It has withstood the test of time in a variety of uses and is widely known as the -Inchstandard of the industry-Inch
- Its low coefficient of friction allows tighter joint makeup with lower torque
- It also breaks out easily without galling, seizing, or damaging threads
- It is excellent for service where immediate pressurization is necessary
Description
Product Description
Rectorseal 25790 1.75 oz. No. 5 Pipe Thread Sealant Rectorseal 25790 1.75 oz. No. 5 Pipe Thread Sealant Features: Pipe thread sealant Soft set slow drying compound which seals, lubricates and protects threaded pipe and fittings Can be pressurized immediately for piping up through 2″ and 100 psi for natural gas, air and water only Ideal for application with a wide variety of fluids and gases including potable water applications Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe Not recommended for use with ABS pipe or oxygen 1.75 oz.
From the Manufacturer
RectorSeal No. 5 pipe thread sealant is a soft-set, slow drying compound which seals, lubricates, and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2-Inch and 100 psi(for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications.
Conclusion
By our suggestions above, we hope that you can found Ao Smith Heat Pump Water Heater Installation for you.Please don’t forget to share your experience by comment in this post. Thank you!
