Top 10 Ao Smith Pressure Tanks

Product Description

Replacement 3/4 In. x 29 In. anode rod for Reliance water heaters.

From the Manufacturer

Anode rods protect the water heater tank from corrosion.

ORDER INCLUDES THE FOLLOWING ITEMS: ****(1) 11" Tank tee with 1" port that screws into the port at the bottom of the pressure tank. Tee has BOTH 1" MALE and 3/4" FEMALE ports for connecting to your incoming /outgoing lines **** 1—FSG2 Square D pressure switch ON 40 PSI…OFF 60PSI PRESET**** (1) 100 psi PRESSURE GAUGE**** (1) PRESSURE RELIEF, SAFETY VALVE 1/2" MPT 100psi or 75psi rating, depending on what I have in stock…Please ask if you have preference**** (1) BOILER DRAIN / HOSE BIB VALVE 1/2" MPT….may or may not be style pictured…same quality, same function though**** (1) 1/4" BRASS NIPPLE FOR ATTACHING PRESSURE SWITCH**** (1) FREE ROLE OF TEFLON TAPE

Product description

Engineered to provide years of trouble-free service using cold rolled steel for a higher strength to weight ratio. Rugged, stable steel base with protective plastic strip. Heavy-duty butyl rubber diaphragm and durable polyolefin liner to prevent corrosion. Waterworker tanks feature an appliance quality finish which is resistant to sunlight and harsh conditions. All tanks are completely lead free for safety. 5 year warranty. Blue tank.

From the Manufacturer

The WaterWorker pre-charged tanks utilize a butyl composite diaphragm, which flexes up and down based on water level and air pressure, as the pump fills the tank with water the air above the diaphragm is compressed, increasing the pressure in the tank until the pump cut-off pressure is reached. When water is drawn from the tank, the pressure inside the tank decreases until the pressure switch starts the pump. The amount of usable water for every pump cycles is called drawdown. The greater drawn-down capacity you select, the less your pump cycles saving energy, money, and extending your pump life. Advantages over galvanized well tanks: Pre-charged tanks do not have water-logging problems like the galvanized tanks. The air and water are totally separated using a diaphragm. No external air controls needed. Pre-charged tanks have a much larger draw-down for the same physical size. Larger draw down reduces pump cycles and pump wear, i.e. at 30/50 PSIG range three times the draw-down for pre-charged tanks of the same physical size. Pre-charged Tanks completely empty during each pump cycle. Pre-charged Tanks are much smaller and easier to handle that galvanized well tanks. Pre-charged tanks with a 30/50 Pressure Switch would be one-third the size of a galvanized tank with the same drawdown. Deep Well Jet Pumps could use either a vertical tank or a horizontal tank, depending on space requirements and sizing. Submersible Pump applications would usually use vertical tanks, again based on proper sizing. Shallow Well Jet Pumps could use vertical or horizontal tanks, based on proper sizing. The rule of thumb in sizing is to count the number of fixtures in the home, i.e. sinks, showers, toilets, dishwasher, faucets, washing machines, outside faucets, etc. and multiply it by 3. Example: a house with 11 fixtures x 3 would be 33-Gallon tank. We would suggest our 44-Gallon tank, which is the next larger sized tank.

Product Description

Factory pre-charge: 38 psi (pounds per square inch). maximum working pressure 100 psi. Maximum operating temperature 200 F (Degree Fahrenheit). engineered to provide years of trouble-free service using cold rolled steel for a higher strength to weight ratio. Rugged, stable steel base with protective plastic strip. Heavy-duty butyl rubber diaphragm and durable polyolefin liner to prevent corrosion. Water worker tanks feature an appliance quality finish which is resistant to sunlight and harsh conditions. All tanks are completely lead free for safety. Meets nsf (National Sanitation foundation) standard 61 for clean, safe drinking water. 5 year warranty. Blue tank.

From the Manufacturer

The WaterWorker pre-charged tanks utilize a butyl composite diaphragm, which flexes up and down based on water level and air pressure, as the pump fills the tank with water the air above the diaphragm is compressed, increasing the pressure in the tank until the pump cut-off pressure is reached. When water is drawn from the tank, the pressure inside the tank decreases until the pressure switch starts the pump. The amount of usable water for every pump cycles is called drawdown. The greater drawn-down capacity you select, the less your pump cycles saving energy, money, and extending your pump life. Advantages over galvanized well tanks: Pre-charged tanks do not have water-logging problems like the galvanized tanks. The air and water are totally separated using a diaphragm. No external air controls needed. Pre-charged tanks have a much larger draw-down for the same physical size. Larger draw down reduces pump cycles and pump wear, i.e. at 30/50 PSIG range three times the draw-down for pre-charged tanks of the same physical size. Pre-charged Tanks completely empty during each pump cycle. Pre-charged Tanks are much smaller and easier to handle that galvanized well tanks. Pre-charged tanks with a 30/50 Pressure Switch would be one-third the size of a galvanized tank with the same drawdown. Deep Well Jet Pumps could use either a vertical tank or a horizontal tank, depending on space requirements and sizing. Submersible Pump applications would usually use vertical tanks, again based on proper sizing. Shallow Well Jet Pumps could use vertical or horizontal tanks, based on proper sizing. The rule of thumb in sizing is to count the number of fixtures in the home, i.e. sinks, showers, toilets, dishwasher, faucets, washing machines, outside faucets, etc. and multiply it by 3. Example: a house with 11 fixtures x 3 would be 33-Gallon tank. We would suggest our 44-Gallon tank, which is the next larger sized tank.This is a Hazmat non-returnable item

“Features:

Stainless steel 1/4″” NPT valve thread connection to connect to RO systems and other water producing applications. Smooth internal air vent cap prevents diaphragm damages. High-grade butyl diaphragm and post-cure procedures ensure a safe, tasteless and odorless water chamber. Discharges effectively in a vertical or horizontal position. Tested by independent third-party to meet NSF/ANSI Standard. IAMPO approved. CE Mark approved

Specifications & Dimensions:

Height: 14″”
Diameter: 11″”
Tank size: 3.2 gallons
Shipping weight: 9 LBS

Tank ball valve included.”

PURCHASE INCLUDES: (1)WX-202XL pressure tank. BRAND NEW NEVER BEEN USED! 7 YEAR WARRANTY THROUGH Seller–BUYER PAYS RETURN SHIPPING! Factory pre-charged pressure: 38 PSI; System connection: 1" NPT; Max. operating temperature: 200F; Max. working pressure: 125 PSI; Tank volume: 26 gallons; Height: 38-1/4"; Diameter: 15-3/8"; Shipping weight: 36 lbs; Shell: Steel; Diaphragm: Heavy Duty Butyl; Liner: Virgin Polypropylene; Coating: Blue Enamel.

2. 1 us gal (8L) in-line captive air pressure tank. Designed for water systems assembled with a jet pump. Tough epoxy-baked finish for durability. Replaceable bladder made of synthetic butyl rubber to increase reliability and life span. No water to metal contact for rust-free operation. Stainless steel flange with 1 inch NPT connection. 100 psi maximum working pressure. For use with a 20/40 psi pressure switch, the air pressure must be adjusted to 18 psi; for a 30/50 psi switch, the pressure must be adjusted to 28 psi. Drawdown 0. 7 us gal (20/40 psi); 0. 6 us gal (30/50 psi).

The Well-X-Troll WX-350 Professional Stand is specifically designed for larger homes and institutions such as country clubs, farms, nursing homes, etc. This handles the demands of larger systems in a minimum of space. Exclusive butyl diaphragm along with the 100 percent corrosion resistant virgin polypropylene liner are secured by a positive hoop ring seal for added strength and reliability. This totally integrated system outperforms other types of water chamber designs. The stainless steel air valve is welded rather than threaded to prevent loss of air pressure. The finest quality custom mill steel is used in the deep drawn dome for extra strength while keeping tank weight to a minimum. Amtrak invented the first pre-pressurized well tank over 50 years ago. This revolutionary product featured an innovative design using a hoop ring and groove to lock the diaphragm, liner and shell together in a totally unique way. This tradition of innovation continued with Amtrak’s Next Generation Well-X-Troll, which utilized high strength steel to deliver 150 psi working pressure – 20 percent higher than competitive well tanks. Note:  all tanks are pre-pressurized at 38 psi and should always be set 2 psi below the cut in of your pressure switch. It is recommended to check tank pressure before installation. Pressure switch settings should not exceed a 20 psi differential between cut in and cut out.