Nowadays, there are so many products of ao smith proline water heaters in the market and you are wondering to choose a best one.You have searched for ao smith proline water heaters in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ao smith proline water heaters which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
689 reviews analysed
1. About Fluid | Aluminum Zinc Flexible Anode Rod KIT for Water Heaters | INCLUDES1-1/16" DEEP WELL SOCKET | Brass Cap | Teflon Tape | 44 Inches Long | GETS RID OF STINKY ROTTEN EGG SMELLING WATER!
Feature
- FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. The INCLUDED 1-1/16” Deep Well Socket will fit and remove your old anode rod and install your new anode upgrade. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- GET RID OF THE EMBARRASSING ROTTEN EGG SMELL IN YOUR HOME with our Aluminum / Zinc Anode Rod! Did you know that the magnesium anode rod inside your hot water tank is the number one key contributor to the production of your smelly, hydrogen sulfide gas? About Fluid solved this problem by creating a flexible anode rod made from an Aluminum/Zinc Alloy, instead of magnesium. This unique alloy works everyday, controlling and killing the bacteria responsible for the sulfur and rotten egg smelling gas.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you. The Brass Cap is there to place on your drain, after you’re done, just to be certain your floors are always dry.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw. All you provide is a ½ Inch Ratchet or Breaker Bar, a few common hand tools, a friend and your favorite beverage! (not included).
- CHANGE THE ANODE ROD, NOT THE WATER HEATER.The anode rod in your water heater is designed to decay instead of your Water’s Heater Tank itself. Eventually, the anode rod is completely consumed (usually just before your water heater warranty is up) and the Water Heater Tank begins to decay and ultimately rusts,fails,cracks and leaks. This is why maintaining the anode rod (by checking and or replacing every 2 years) in your water heater insures the anode rod decays, and not your water heater!
Description
YOU’VE GOT THIS!
WE’LL WALK YOU THROUGH EACH EASY STEP.
1. FITS: Most water heaters including Rheem, Reliance, Richmond, kenmore, State, GE, and many more that use this HEX TYPE (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode.
2. EASY-TO-FOLLOW, STEP-BY-STEP INSTRUCTIONS. Do It Yourself Instructions, written by plumbers and translated for everyday problem solvers like you.
3. WIN THE WAR ON SMELLY WATER! Never have to explain that smell again!
4. ELIMINATE HYDROGEN SULFIDE GAS. Just replace your existing magnesium anode rod with the About Fluid Aluminum/Zinc rod and eliminate that rotten-egg-smelling, hydrogen sulfide gas, in your hot water.
5. EVERYTHING YOU NEED IS INCLUDED FOR EASY INSTALLATION. This Complete Kit includes all-four necessary components:(1) Aluminum/Zinc Flexible Anode with a ¾ Inch diameter and 44 Inches long, capped with the standard ¾ NPT hex plug (2) Heavy-duty, ½ Inch Drive, 1-1/16” Deep-Well Chrome Vanadium Socket Tool (3) Large roll of Teflon Tape and(4) the Brass Cap for your drain valve. All you provide is a ½ Inch ratchet or breaker-bar.
6. YOU CAN REST ASSURED YOU HAVE THE RIGHT SOCKET. This complete kit INCLUDES the 1-1/16” Socket required for this Anode upgrade.
7. NO LEAKS! Be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
8. NO DRIPS! We included a Brass cap you can thread onto your drain after your done, just to be sure your floor is always dry.
9. SAVE YOUR TANK AND SAVE $. This sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
10. INSTALLS-ANYWHERE-DESIGN Using flexible, hinged short sections that are lowered one-by-one into the water heater.
2. Aluminum Zinc Hex Head Flexible Anode Rod (.800" x 3/4" x 44") – Stops Rotten Egg Smelly Water! …
Feature
- Sacrificial anode rod for water heater tank made from aluminum-zinc alloy cures rotten egg (sulfur) smell in hot water.
- Replaces water heater tank’s existing magnesium anode rod (hex head only).
- Eliminates rotten egg smell in hot water caused by hydrogen sulfide gas (H2S) and extends service life of water heater tank.
- Segmented flexible design for easy installation
- can be cut to length to fit different size heaters.
- Not recommended when water softener is in use (use a powered anode/cathode instead).
3. CerAnode Powered Anode Rod Expandable for Water Heater (20-100 gal tank) – No More Rotten Egg Smell!
Feature
- Replaces water heater tank’s existing hex head and hot outlet anode
- Expandable anode protects the tank interior from top to bottom
- Water softener use does not affect the longevity or protection
- Best consumer choice in powered anodes since 1983 – Made in the USA
- Requires 3″ or 6″ dialectric nipple and 3/4″ brass tee (not included)
4. About Fluid | Magnesium Flexible Anode Rod Kit for Water Heaters | Teflon Tape | Easy-to-Follow, Step-by-Step Instructions | 44 Inches Long. (Without Socket and Cap)
Feature
- Easy-To-Install, Magnesium Anode Rod With Teflon Tape And Step-By-Step Instructions (Without Socket And Cap)
- FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you.
- You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw.
Description
ONE SIZE FITS MOST.Almost all water heaters including; Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. Most water heaters use this HEX TYPE (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode. A few water heaters do use a “hot-water-outlet type” where the anode is part of the outlet piping. (You may want to check first.)
. SAVE YOUR TANK AND SAVE $. Magnesium is the best anode rod material used to protect your water heater. This Magnesium sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
. INSTALL IN SMALL SPACES. The About Fluid flexible hinged design allows you to install the anode rod in any location, requiring only twelve inches of overhead clearance.
5. E-SDS Residental Magnesium Flexible Anode Rod for Water Heater,Prevent Corrosion Within your Water Heater,Hex Plug,3/4" Thread,44-Inch Long,0.80" Diameter
Feature
- Corrosion Protection: Replacing your anode rod at regular intervals may increase the life of your water heater, saving you money, time and the inconvenience of having to replace your water heater.Anode rod is expected to provide about two years of corrosion protection.
- Flexible Design for Tight Areas: The Flexible anode rod went in very easy because it is segmented into four sections that allow you to bend it at the hinge or difficult access points making it an easy install.
- Advantages of Magnesium Anode Rods: Made from magnesium to provide a healthy solution to your needs and more effective at keeping the water tank from corroding than Aluminum rods.
- Fits: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection.44″ overall length,each section is about 9 1/2″ long.
- Warranty: If you have any questions or issues with your product, contact our customer service team
- A representative will be more than happy to assist you.
6. 44" Aluminum Zinc Anode Rod, Eau Get Rid of Rotten Egg Smelling Flexible Water Heater Anode Rod for GE, Rheem, Reliance,Kenmore Water Heater Including 1-1/16" Hex Socket Tool and Teflon – Upgraded
Feature
- GET RID OF ROTTEN EGG SMELL – Aluminum Zinc Alloy sacrificial anode rod made of high-quality Aluminum Zinc Alloy that is key element for permanently eliminate rotten egg smell from water tank.
- SIZE – Flexible 44 Inch-long anode rod is hinged into four parts. Each part is less than 12 Inches allowing you to replace anode rods easily even in a narrow space. Just safely cut it shorter with a simple hacksaw.
- ALUMINUM ZINC ANODE ROD KIT – The best choice to extending service life of your water heater tank from corroding is replacing water rod! This water heater anode rod makes it simple with everything you need, Anode Rod, Teflon Sealing Tape and 1-1/16” chrome finished socket, all in one box.
- FITS – Almost all water heaters including
- A.O. smith,Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection.
- REPLACEMENT EASILY – Anodes are designed to be easily and regularly replaced. Their only purpose is to decay instead of your water heater, and that’s exactly what it will do. As soon as the anode rod is depleted and fully decayed, the water heater begins to rust, then crack, fail and leak. Inspecting and changing your anode rod every 2 years will keep your water heater’s tank, strong reliable and off your mind!
Description
Eau Aluminum zinc anode rod replacement complete kit include all necessary components:
(1) 44 Inch long Aluminum Zinc Flexible Anode with standard ¾ NPT hex plug connection
(2) Heavy duty 1-1/16” Chrome Socket Tool
(3) Large roll of Teflon Tape
(4) Anode Rod installation instruction
For new version of Aluminum zinc anode rod, we upgrade the formulation of aluminum and zinc which makes anode rod more efficiency ,
and also offer installation instruction for DIYers in case of you unable to get out of rotten egg smell from your water tank.
Aluminum zinc VS Magnesium
Aluminum zinc alloy anode is the cheapest permanent fix for smelling water. Magnesium only solve smelling problem temporarily. If you don’t waste your money and replace your anode again in half year later.
We suggest that Aluminum zinc alloy anode is the best choice. The zinc is a key ingredient, since magnesium anodes will reek water to high heaven.
44 inches Aluminum Zinc Anode Rod:
*one size fits for a.o. smith Rheem, Reliance, Richmond, Kenmore, State, GE water heater
*save your tank and save money
*install in small spaces
Specfications:
Color: Grey
Size: 0.8 X 44 inches
Package Included:
1 x Aluminum Zinc Flexible Water Heater Anode Rod
1 x Teflon Tape
1 x 1-1/16” Chrome Socket Tool
1 x Anode Rod installation instruction
7. Osring 44 Inch Zinc Anode Rod for Water Heater, Flexible Anode Rod Kit with Teflon Tape and 1-1/16” Socket Tool, Triple Defense Against Water Odor and Water Tank Inner-Wall Corrosion
Feature
- Sacrificial anode rod for water heater tank is made from aluminum-zinc alloy, strongly curing the smell of rotten egg in hot water.
- Efficiently eliminating rotten egg smell in hot water caused by hydrogen sulfide gas (H2S) and extending service life of your water heater tank.
- Hex plug anode rod with 4/5” diameter has standard 3/4” NPT thread connection. Perfect for most of water heaters, such as Rheem and Richmond!
- Segmented flexible design keeps water anode rod can be cut to the right length to fit different sizes of heaters, for easy installation with Teflon tape provided!
- 27mm deep well socket provided for easily replacing the anode rod by taking the hex head out and putting the new one into water heater tank. Not recommended when water softener is in use!
Description
Does Your Water Stink Like Rotten Eggs?
If your water smells like sulfur/rotten eggs, it could be caused by sulfur bacteria reacting with your water heater tank’s old anode rod.
This reaction results in hydrogen sulfide gas that causing annoying and embarrassing odor, and also corrode your home’s plumbing pipes and prematurely kill your water heater.
Here, We Have the Solution to Your Smelly Water Problem
By replacing your heater’s old anode with Osring Anode Rod, you will put an end to the reaction and the smell.
NOTE: Not recommended when water softener is in use!
No More Rotten Egg Smell!
- Sacrificial Anode rod attracts corrosive elements in the water, and gradually the rod become corroded, so the water tank will never rust out.
- Flexible anode rod 44 inch is built in 4 sections, whose the flexibility keeps it easily installed in water heater tank with 1-1/16” deep well socket provided.
- The anode rod allow you to trim the sections to fit the height of any home water heater, Teflon tape provided for installation.
- Please replacing anode rod about every two years to extend service life of water heater tank.
SPECIFICATION
Color: silver
Material: aluminum-zinc alloy
Length: 44-inch
Package:
– 1pcs * 44in anode rod
– 1pcs * Teflon tape
– 1pcs * socket tool
8. Reliance 9001829005 32-Inch Magnesium Water Heater Anode Rod
Description
Product description
Reliance 9001829-005 Magnsm Adnode Rod
From the Manufacturer
Anode rods protect the water heater tank from corrosion.
9. AO Smith EJC-6 Residential Electric Water Heater
Description
Product Description
AO Smith ProMax Specialty Electric EJC-6 Water Heater Residential Electric 6 Gal 120V 1.6W Compact. Compact design. Side-Mounted Plumbing and Electrical Connections. Designed for Installation Undera Counter. Durable Tamper-Resistant Brass Drain Valve.
From the Manufacturer
AO Smith ProMax Specialty Electric EJC-6 Water Heater Residential Electric 6 Gal 120V 1.6W Compact. Compact design. Side-Mounted Plumbing and Electrical Connections. Designed for Installation Undera Counter. Durable Tamper-Resistant Brass Drain Valve.
10. Kohree 44" Aluminum Zinc Anode Rod Flexible Water Heater Protection Anode Rod Includes 1 Tape Water Heaters Tank – 3/4" NPT Threads for Rheem, Reliance, Richmond, Kenmore, State, GE
Feature
- 【Application】: Size: 44″ long, 3⁄4″ thread, using 1-1 / 16″ socket. It is used to replace the rust bar in the water tank of the water heater. Perfect replacement for Rheem, Reliance, Richmond, Kenmore, State, GE and more.
- 【High Quality Material】:Made of non-toxic aluminum zinc, compared with 316 stainless steel connectors, durable and safe.
- 【Better Protection】: The aluminum zinc hex head anode rod can prevent the water tank from rusting in the metal water tank, and it can absorb the oxidized substances, get rid of rotten egg smells, and prolong the life of the water tank.
- 【Easy Installation】:We provide a roll of tape to tighten the screw, preventing looseness.
- 【100% Customer Satisfaction】Providing high quality products and excellent service has always been our top priority, if you have any questions, feel free to contact us for help.
Conclusion
By our suggestions above, we hope that you can found Ao Smith Proline Water Heaters for you.Please don’t forget to share your experience by comment in this post. Thank you!
