Finding your suitable readers for ao smith water heater anode removal is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for ao smith water heater anode removal including detail information and customer reviews. Let’s find out which is your favorite one.
723 reviews analysed
1. About Fluid | Aluminum Zinc Flexible Anode Rod KIT for Water Heaters | INCLUDES1-1/16" DEEP WELL SOCKET | Brass Cap | Teflon Tape | 44 Inches Long | GETS RID OF STINKY ROTTEN EGG SMELLING WATER!
Feature
- FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection. The INCLUDED 1-1/16” Deep Well Socket will fit and remove your old anode rod and install your new anode upgrade. You can be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
- GET RID OF THE EMBARRASSING ROTTEN EGG SMELL IN YOUR HOME with our Aluminum / Zinc Anode Rod! Did you know that the magnesium anode rod inside your hot water tank is the number one key contributor to the production of your smelly, hydrogen sulfide gas? About Fluid solved this problem by creating a flexible anode rod made from an Aluminum/Zinc Alloy, instead of magnesium. This unique alloy works everyday, controlling and killing the bacteria responsible for the sulfur and rotten egg smelling gas.
- LEARN FROM PROFESSIONALS using our Easy-To-Follow, Step-by-step instructions. Our Licensed Plumbers and Instructors have decades of experience. They gathered together and documented exactly how they install anode rods, and we have included every step in our manual. Our Instructions are written by Plumbers and translated for everyday problem-solvers like you. The Brass Cap is there to place on your drain, after you’re done, just to be certain your floors are always dry.
- WATER HEATER INSTALLED IN A TIGHT SPACE? Even if your water heater is located in a small or tight space, this 44 Inch-long rod is hinged into four segments, less than 12 Inches long each. Each segment can be easily lowered, one-by-one, into your water heater. If the over-all length is a little too long(rare cases), just safely cut it shorter with a simple hacksaw. All you provide is a ½ Inch Ratchet or Breaker Bar, a few common hand tools, a friend and your favorite beverage! (not included).
- CHANGE THE ANODE ROD, NOT THE WATER HEATER.The anode rod in your water heater is designed to decay instead of your Water’s Heater Tank itself. Eventually, the anode rod is completely consumed (usually just before your water heater warranty is up) and the Water Heater Tank begins to decay and ultimately rusts,fails,cracks and leaks. This is why maintaining the anode rod (by checking and or replacing every 2 years) in your water heater insures the anode rod decays, and not your water heater!
Description
YOU’VE GOT THIS!
WE’LL WALK YOU THROUGH EACH EASY STEP.
1. FITS: Most water heaters including Rheem, Reliance, Richmond, kenmore, State, GE, and many more that use this HEX TYPE (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode.
2. EASY-TO-FOLLOW, STEP-BY-STEP INSTRUCTIONS. Do It Yourself Instructions, written by plumbers and translated for everyday problem solvers like you.
3. WIN THE WAR ON SMELLY WATER! Never have to explain that smell again!
4. ELIMINATE HYDROGEN SULFIDE GAS. Just replace your existing magnesium anode rod with the About Fluid Aluminum/Zinc rod and eliminate that rotten-egg-smelling, hydrogen sulfide gas, in your hot water.
5. EVERYTHING YOU NEED IS INCLUDED FOR EASY INSTALLATION. This Complete Kit includes all-four necessary components:(1) Aluminum/Zinc Flexible Anode with a ¾ Inch diameter and 44 Inches long, capped with the standard ¾ NPT hex plug (2) Heavy-duty, ½ Inch Drive, 1-1/16” Deep-Well Chrome Vanadium Socket Tool (3) Large roll of Teflon Tape and(4) the Brass Cap for your drain valve. All you provide is a ½ Inch ratchet or breaker-bar.
6. YOU CAN REST ASSURED YOU HAVE THE RIGHT SOCKET. This complete kit INCLUDES the 1-1/16” Socket required for this Anode upgrade.
7. NO LEAKS! Be certain that you won’t have any leaks by using the INCLUDED Full Roll of Pipe Sealing Teflon Tape. The Large Roll of Teflon Tape leaves you with plenty left over for the next time you check your anode rod’s condition.
8. NO DRIPS! We included a Brass cap you can thread onto your drain after your done, just to be sure your floor is always dry.
9. SAVE YOUR TANK AND SAVE $. This sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
10. INSTALLS-ANYWHERE-DESIGN Using flexible, hinged short sections that are lowered one-by-one into the water heater.
2. E-SDS Residental Magnesium Flexible Anode Rod for Water Heater,Prevent Corrosion Within your Water Heater,Hex Plug,3/4" Thread,44-Inch Long,0.80" Diameter
Feature
- Corrosion Protection: Replacing your anode rod at regular intervals may increase the life of your water heater, saving you money, time and the inconvenience of having to replace your water heater.Anode rod is expected to provide about two years of corrosion protection.
- Flexible Design for Tight Areas: The Flexible anode rod went in very easy because it is segmented into four sections that allow you to bend it at the hinge or difficult access points making it an easy install.
- Advantages of Magnesium Anode Rods: Made from magnesium to provide a healthy solution to your needs and more effective at keeping the water tank from corroding than Aluminum rods.
- Fits: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection.44″ overall length,each section is about 9 1/2″ long.
- Warranty: If you have any questions or issues with your product, contact our customer service team
- A representative will be more than happy to assist you.
3. Blue Lightning 79098 Residental Magnesium Flexible Anode Rod, Hex Plug, 44-Inch
4. Eastman 45058 Heavy-Duty Steel Water Heater Element Wrench
Feature
- MATERIAL: This water heater element wrench is made of high-quality, heavy-duty steel which provides strength and endurance
- DURABLE: The sturdy steel of this element wrench is chrome plated which provides extra durability making it last longer
- COMPATIBILITY: This water heater element wrench is universal which fits most standard screw-in elements
- CONTENT: This package includes 3/4 inch to 1/2 inch drive adapter
- EASE: This wrench makes replacement and installation of screw-in water heater elements quickly without hassle
Description
Product Description
The Eastman 45058 Water Heater Element Wrench is made of high-impact heavy-duty steel which gives strength. The steel has a chrome finish which gives a modern look to the heater element socket also providing durability making it extremely long-lasting. The kit also includes 3/4 inch to 1/2 inch drive adapter.
USE :This water heater element socket is a must for every household as it lets you replace and install screw-in water heater elements quickly and easily without any hassle. It can be fitted on almost all standard screw-in elements. A modern design with efficient quality.
From the Manufacturer
Eastman’s Heavy-Duty Water Heater Element Wrench helps remove and replace residential screw-in water heater elements quickly and easily. Made of chrome plated steel for durability and strength. Includes a 3/4″ to 1/2″ drive adapter.
5. Podoy 9001829005 Magnesium Water Heater Anode Rod, 3/4" NPT x 32" Rod Dia 0.84" Overall Compatible with Reliance Hot Water Heaters
Feature
- ★ This 32 Inch-long rod can be cut to fit shorter tanks. Just safely cut it shorter with a simple hacksaw.
- ★ ADVANTAGES OF MAGNESIUM ANODE RODS – Magnesium anode rods produce a stronger current than Aluminum rods making them more effective at keeping the water tank from corroding.
- ★ EXTEND LIFE OF YOUR WATER HEATER: Magnesium anode rod gets corroded faster than tank of water heater. Usually you should check magnesium anode rod every 2 years.
- ★ CORROSION PROTECTION: Replacing your anode rod at regular intervals may increase the life of your water heater, saving you money, time and the inconvenience of having to replace your water heater.Anode rod is expected to provide about two years of corrosion protection.
- ★ GUARANTEE: If you’re not completely satisfied, you can ask for replacement or refund
Description
How to Replace an Anode Rod (6 Steps) Here are generalized to work with a wide selection of brands and heater designs, you may have to modify some steps to match your particular model.
Step 1: Shut Off the Power and Water
Before performing any work on a water heater, you should always turn off the circuit breaker or turn off the thermostat on gas models. If your gas water heater has a “Vacation” setting, that will allow you to work on the unit without relighting the pilot afterward. If there is a valve on the cold water supply line, turn that off, otherwise turn off the water at the meter or pump.
Step 2: Drain the Tank
Drain the tank only until the water level is beneath place where the anode rod is located. Water will not drain from the tank until the drain valve is open and a hot water valve is opened. You will get faster results by turning on the hot water faucet closest to the heater.
Step 3:Remove the Anode Rod
anode-rod-replacementThe anode rod can be removed with a boxed end wrench or socket. If it will not turn using a wrench, use a socket and breaker bar. Tightening the anode rod slightly will help break the threads loose, making removal easier.
It is a good idea to have a helper hold the tank while removing and installing the anode rod, as twisting the water heater could lead to leaks or broken pipes.
Never bang on components of a water heater, as the tank liner is easily damaged.
Step 4: Install the New Anode Rod
Insert the new rod, or the old one. Turn the component clockwise until it cannot be turned by hand, then tighten it another 1/2 turn using your socket wrench.
Step 5: Restore Water and Power
Make sure the drain is closed, and turn the cold water supply on. Open the same hot water valve as you used to drain the tank and allow it to flow until all air has been removed from the tank.
6. Magnesium Anode Rod, Magnesium Flexible Water Heater Anode Rod by Podoy for Hot Water Heaters 3/4 inch NPT Thread, Hex Plug, 44” Long & 0.8” Diameter
Feature
- ★ ADVANTAGES OF MAGNESIUM ANODE RODS – Magnesium anode rods produce a stronger current than Aluminum rods making them more effective at keeping the water tank from corroding.
- ★ EXTEND LIFE OF YOUR WATER HEATER: Magnesium anode rod gets corroded faster than tank of water heater. Usually you should check magnesium anode rod every 2 years.
- ★ FLEXIBLE DESIGN – This 44 Inch-long rod is hinged into four parts. Each part is less than 12 Inches allowing you to replace anode rodes easily even in a narrow space. Just safely cut it shorter with a simple hacksaw.
- ★ CORROSION PROTECTION: Replacing your anode rod at regular intervals may increase the life of your water heater, saving you money, time and the inconvenience of having to replace your water heater.Anode rod is expected to provide about two years of corrosion protection.
- ★ FITS: Almost all water heaters including
- Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾” NPT Anode Rod Connection.
Description
A long metal “anode rod” that attracts corrosive elements in the water. When the rod itself becomes so corroded that it can no longer do its job, the tank soon rusts out, leaks and needs replacement. However, if you replace your water heater anode rod before it fails, about every tow years, you can double the life of your water heater.
How to replace your Water Heater Anode Rod?/
Step1: Before you get started, close the shutoff valve, turn on the hot water at a faucet to relieve pressure, and turn off the electricity or gas to the heater. Open the drain valve near the bottom of the tank and drain out several gallons of water. Caution: The water is hot!
Step2: Drain some water from the tank to check for rust. It’s time for a new water heater if you see rusty flakes (not just orange water, which can come from corroded pipes or well water). If the water is clean, remove the rod to check its condition.
Step3: To loosen the rod, you’ll need an air compressor, a 1/2-in.-drive impact wrench and a 1-1/16-in. Even with a breaker bar, it can be nearly impossible to break the anode rod free.
Step4: Turn off the power or gas. Then close the cold-water valve at the top of the tank and drain off several gallons. Loosen the hex head with the impact wrench, but unscrew it the rest of the way by hand.
Hint:
The hex head may be under a plastic cap. Uncover it, then pull it up and out to check its condition. When the threads break free, stop turning and look for water around the hex head. If you see leakage, drain the tank further. If you don’t have enough overhead clearance to pull the rod out of the tank, bend it as you remove it.
7. Camco5" Residential Screw-In Water Heater Element Wrench – Fits All Standard Screw In Elements (09883)
Feature
- 5″ long Zinc plated water heater element wrench
- Compatible with all standard screw-in elements and 1-1/2″ hex on residential screw-in water heater elements
- Cross holes allow you to use a screwdriver for enhanced torque and to help remove and install element with ease
- Fits into offsets where an adjustable wrench can’t
- For use with residential water heaters
8. About Fluid | MAGNESIUM Flexible Anode Rod, INCLUDES 1-1/16" Hex Socket, Complete Kit for Water Heaters | Teflon Tape | Hi Temp Brass Cap | Easy-To-Follow, Step-By-Step Instructions | 44 Inches Long.
Feature
- ABOUT FLUID’S MAGNESIUM ANODE ROD KIT is the fastest and best choice to prevent your water heater from dissolving itself from the inside out! With the average cost to have a water heater replaced crossing over the $1,400.00 mark, replacing your anode rod is cheap peace-of-mind. This kit makes it simple with everything you need and easy-to-follow, step-by-step instructions, all in one box. Have stinky rotten egg smelling hot water? Search For our About Fluid ALUMINUM / ZINC Anode Rod Kit.
- KIT INCLUDES! (1) HEX-TYPE ANODE ROD, most water heaters use this kit’s ¾ NPT Anode Rod (2) BRASS CAP, just in case you don’t trust your drain valve to shut completely (3) HARD-TO-FIND 1-1/16”, 6-POINT DEEP-WELL CHROME VANADIUM SOCKET, fits both your old and your new anode (4) PIPE SEALING TEFLON TAPE, with plenty left over for the next time you check your anode’s condition (5) INSTRUCTIONS. All you provide is a ½ Inch Ratchet or Breaker Bar, a friend and your favorite beverage! (not included).
- WATER HEATERS BURST AND YOU CAN PREVENT THIS! I began my plumbing apprenticeship in the 90s. The plumbers I worked for would say “they must place a self-destructing device in water heaters, timed to go off just after the warranty is over,” then shake their heads as we dragged a 7-year-old, rusty-sludge-spewing water heater away to the nearest recycling center. The plumbers weren’t entirely wrong, they just got it backwards. Next>
- WHAT I’VE LEARNED: Manufactures install an anode rod in every water heater at the factory because they know their tanks will quickly rust and fail without one. The anode rod takes the destruction from a chemical process called electrolysis so the tank doesn’t have to. If the water heater has a 6 year warranty, the Anode Rod is sized to last about 5 years in laboratory conditions. Longer warranties on water heaters come with a new decal for the outside of the tank and a slightly larger Anode Rod.
- CHANGING THE ANODE ROD IS EASY, REPLACING YOUR WATER HEATER IS NOT! Anodes are designed to be easily and regularly replaced. Their only purpose is to decay instead of your water heater, and that’s exactly what it will do. As soon as the anode rod is depleted and fully decayed, the water heater begins to rust, then crack, fail and leak. Inspecting and changing your anode rod every 2 years will keep your water heater’s tank, strong reliable and off your mind!
Description
YOU CAN DO THIS!
WE’LL WALK YOU THROUGH EACH EASY STEP
1. EASY-TO-FOLLOW, STEP-BY-STEP INSTRUCTIONS.Do It Yourself Instructions, written by plumbers and translated for everyday problem solvers like you.
2. EVERYTHING YOU NEED IS INCLUDED FOR EASY INSTALLATION. This Complete Kit includes all-four necessary components: (1) 44 Inch long Magnesium Flexible Anode with a ¾ Inch diameter using the standard ¾ NPT hex plug connection (2) Heavy-duty, ½ Inch Drive, 1-1/16” Deep-Well Chrome Vanadium Socket Tool (3) Large roll of Teflon Tape and a Brass hose Cap. All you provide is a ½ Inch ratchet or breaker-bar.
3. YOU CAN REST ASSURED YOU HAVE THE RIGHT SOCKET. Use the included 1-1/16” Socket to remove the old anode rod and to quickly install your new anode.
4. NO LEAKS! We include a full-roll of Teflon Tape to ensure you will not have leaks and will also have, plenty left-over for next time.
5. NO DRIPS! We included a Brass cap you can thread onto your drain after your done, just to be sure your floor is always dry.
6. ONE SIZE FITS MOST. Most water heaters use this HEX TYPE (6-sided top that looks like a bolt) ¾”or 0.80” diameter anode. A few water heaters do use a “hot-water-outlet type” where the anode is part of the the outlet piping. (You may want to check first.)
7. SAVE YOUR TANK AND SAVE $. Magnesium is the best anode rod material used to protect your water heater. This Magnesium sacrificial anode rod will decay instead of your hot water tank. That’s it’s job!
8. INSTALL IN SMALL SPACES. The About Fluid flexible hinged design allows you to install the anode rod in any location, requiring only twelve inches of overhead clearance.
.
9. Rheem SP10869MM Screw-In 240-volt by 4500-watt Element, Premium Resistored Stainless Steel
Feature
- Element – 240V/4500W stainless steel resistored lwd – 1 in screw-in
- Watt density classification: lwd, input Voltage (V): 208, Input voltage (V): 240, wattage at 208V (W): 3380
- Element diameter (in.): .316, Element length – Flange to tip (in.): 13.44, mounting Type: threaded, ACTUAL thread size – Outside diameter.): 1-9/32
- Thread type series designation: NPSM, configuration: fold back, nominal thread size – (in.): 1, threads per inch: 11-1/2
Description
Product Description
Rheem SP10869MM water heater 1 inch 4500W element resistored screw-in LWD 240V stainless steel
From the Manufacturer
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
10. RV Water Heater Magnesium Anode Rod Set – 2-Piece Kit Water Heater Anode Rods with PTFE Tape – Compatible with Suburban and Mor-Flo Water Heater Tanks – 9.25" Length ¾" NPT Threads
Feature
- WHAT YOU NEED: If you’re using a water heater tank, you should keep in mind that its interior is always subjected to the corrosive action of oxygen and other elements. In order to prolong its life and save your money and time, we offer the perfect solution!
- SAFETY COMES FIRST: These RV water heater anode rods are made from superior quality, extra-durable magnesium guaranteed to withstand the test of time. Unlike classic aluminum zinc rods, our products are 100% for the entire family!
- COMPATIBILITY: These magnesium anode rods are 9.25” long, come with ¾” NPT threads and are compatible with Suburban and Mor-Flo water tanks. The rods use a 1-1/16 inch socket.
- LONGER LIFE: These water heater magnesium anode rods work better than aluminum ones in attracting corrosive elements, protecting your water heater and prolonging its life span with little to no investment.
- GREAT DEAL PACKAGE: This practical RV water heater kit includes 2 magnesium anode rods and a BONUS PTFE tape, all set for fixing up your water heater tank and optimizing its functionality!
Description
Small part, Big Impact
Are you tired of spending enormous amounts of money and energy with expensive
fixing procedures of your water tank? Would you like to avoid unpleasant and unforeseen
investments when it comes to your water heating sources? You’ve come to the right place!
Why is this product for you?
This 2-piece anode rod set is made from top-quality magnesium which is non-toxic and entirely
safe for the human body! The high absorption rate of corrosive elements makes it a better choice
than aluminum, keeping your water tank in perfect functioning condition for years. Plus, with
a bonus PTFE tape included, the installation process is easy for anyone
Some of the amazing features of this product:
- Set includes: 2 anode rods, 1 PTFE tape;
- Dimensions: 25″ Length ¾” NPT Threads;
- Uses 1-1/16 inch socket;
- Compatible with Suburban and Mor-Flo models;
- Material: magnesium;
- Safe for humans.
Add to cart now and reap all the benefits this RV Water Heater Magnesium Anode Rod Set has to offer!
Conclusion
By our suggestions above, we hope that you can found Ao Smith Water Heater Anode Removal for you.Please don’t forget to share your experience by comment in this post. Thank you!
