902 reviews analysed
1. Ninja Blender Replacement Parts 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits 1000w Nutri Ninja Auto-iQ BL480-30 BL482-30 BL682 BL640
Feature
- 【Ninja Blade Apply to】7 fins Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing).
- 【Nutri Ninja Replacement Parts】 Pro Extractor Replacement Blade by Best Potok. 7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel.
- 【Important Tips】Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- 【Packing Include】 1x 7 Fins Bottom Blade Replacement, 2 x Replacement Gasket Rubber ( One Gasket Rubber already on the 7 fins replacement blade). Please check your existing blade by counting the fins before purchase. It Should Be 7fin.
- 【100% SATISFACTION GUARANTEE】 If you are buying before or after purchase any questions, please feel free to contact us, we’ll issue you a full refund or replacement.
Description
One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.
KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
2. AxPower 7 Fins Extractor Blades Replacement Part Bottom Blade for Ninjia Blender for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 and More(2 Pack, 7 Fins)
Feature
- 【APPLY TO】The 7 fins extractor blade is suitable for Nutri Ninja Auto iQ BL2012, BL2013, BL455-30, BL480, BL480D 30, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL494, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102 (Only fit for 18oz, 24oz, 32oz cup not fit for 16oz). Please make sure your Ninjia blender base has 7 fins before order.
- 【HIGH QUALITY】The high-speed blade is made of food-grade stainless steel, high hardness brings qualified anti-corrosion performance. Moreover, the outer is made of durable PP material, not easy to break and scrape.
- 【IMPORTANT NOTE】Note1: The rubber gasket in bottom blade maybe will loosen during transportation. Please check the gasket and make sure it is put snugly into the replacement bottom blade before using it. Note2: If you’re going to use this replacement gasket, please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade.
- 【PACKAGE INCLUDED】 2 x 7 Fins Bottom Blade Replacements, 2 x Extra Gasket Rubbers and 1 x Cleaning Brush as a gift.
- 【BUY WITH CONFIDENCE】Thank you so much for your great support on us. Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service as we can.
3. Replacement Nutri Ninja 6-Fin Extractor Blade FITS Nutri Ninja Blender Auto iQ BL450-70 BL451-70 BL454-70 BL455-70 BL482-70 Only fit for 18 oz 24 oz.32 oz
Feature
- NUTRI NINJA 6 FIN Blade for Nutri Ninja Blender FITS ONLY THIS MODELS 900W BL450-70, BL451-70, BL454-70, BL455-70 1000W BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70,BL484-70
- DOES NOT FIT THIS MODELS BL450-30, BL451-30, BL454-30, BL455-30 1000W BL480-30, BL480W-30, BL481-30, BL482-30, BL483-30,BL484-30
- DOES NOT FIT 16oz CUPS bl770,bl771.
- Ninja Blade Replacement 6 Fins – 3.94″/10cm diameter, effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture.
- NOTE – The replacement rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the bottom blade. Also please sure your blader uses 6 fins.
Description
NUTRI NINJA 6 FIN BLADES WORKS FOR THIS BLENDERS ONLY Nutri Ninja Pro Blender 900w BL450-70, BL451-70, BL454-70, BL455-70 and 1000w Auto-iQ BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70, BL484-70
DOES NOT WORK FOR THIS MODELS Nutri Ninja Pro Blender 900w BL450-30, BL451-30, BL454-30, BL455-30 and 1000w Auto-iQ BL480-30 BL481-30 BL482-30 BL484-30
4. Blender Replacement Parts 7 Fins Bottom Blade For Nutri Ninja Auto iQ BL480 BL642 NN102 BL682 BL2013 BL680A BL682 BL491 BL640 BL642 Nutri Blender Parts (7 Fins-4 Inch)
Feature
- PLEASE CHECK – please check your existing blade for the following 1) Count the FINS IT SHOULD BE 7-FINS. 2) 3.94″ (10cm) Diameter.
- Compatible with Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102
- Packing include: 1×7 Fins Bottom Blade Assembly, 2 x Replacement Gasket Rubber (One Gasket Rubber already in the blade )
- Important Tips-Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- Desiged for:Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 etc,
Description
One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender.
KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102,
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
5. Ninja Kitchen Systems Blenders 6 Blade Assembly 1100 Watt 1200 Watt Authentic Replacement
6. Blender Replacement Parts for Ninja, Bottom Blade 7 Fins and 1 Gasket Rubber for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade （7 fins）
Feature
- 【Blade Apply toNinja 】7 fins Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing)
- 【 Replacement Parts for Ninja parts 】 Pro Extractor Replacement Blade by Best Potok. 7 Fins, 4″/10CM diameter, 165g, made ofmade of food grade stainless steel, high hardness, not easy to break, no gap.
- 【Important Tips】Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- 【Packing Include】 1x 7 Fins Bottom Blade Replacement, 1 x Replacement Gasket Rubber ( One Gasket Rubber already on the 7 fins replacement blade). Please check your existing blade by counting the fins before purchase. It Should Be 7fin.
- 【Desiged for】: NN101-30, BL486CO, BL482-30, BL482, BL685-30, BL682, BL455-30, CT680SS, CT680CO2SS, BL487A, BL680A, BL487, BL682-30, BL450-30, BL642, BL640, BL642-30, BL480, BL455, BL491, BL641, BL681A, BL680A-30, BL492, BL687CO, BL641-30, BL485, BL481,etc.
7. NLSD Ninja Blender Replacement Parts Ninja Bottom Blade 6 Fins for Nutri Ninja Auto iQ BL482 BL456 Blenders (FEMALE FINS ONLY)
Feature
- BEFORE PURCHASING PLEASE CHECK YOUR EXISTING BLADE BY COUNTING THE FINS IT SHOULD BE “FEMALE” Fin’s on the Blade and 4″ (10cm) Diameter
- BEFORE PURCHASING: Please check all the images on this Product Detail page to make sure you are buying the right Blade for your Blender.
- FIT for Nutri Ninja Auto iQ BL480 BL480D BL482 Ninja Professional BL456 Blenders
- Made of food grade BPA Free plastic and stainless steel, effortlessly pulverizes fruits, vegetables, super foods and protein shakes into a delicious, smooth texture. Dishwasher safe.
Description
BEFORE PURCHASING you need to check your Old Blade to make sure the following,.
1) Count the FINS IT SHOULD BE 6-FINS.
2) The blade has FEMALE FINS
3) 4″ (10cm) Diameter.
BEFORE PURCHASING Please check all the images on this Product Detail page to make sure you are buying the right Blade for your Blender.
Warranty Policy
●All products sold by NLSD are covered by 3 months warranty.
●NLSD endeavours to provide customer with new replacement for any product within 15 days from the date of purchase.
●If a customer received a product which is faulty or damaded on arrival, please notify us within 15 days.
●Beyond 15 days, NLSD will provide customer a refund, exchange or repair the product.
8. Replacement Parts for Nutri Ninja, Blender 6 FIN Blade Assembly and 2 Pack 16 oz Cup Set for BL770 BL780 BL660 Professional Blender
Feature
- 【PREMIUM QUALITY】: Made of food grade PP and stainless steel
- This blender blade has 4 blades, effortlessly pulverizes fruits, vegetables, superfoods, ice and protein shakes into a delicious, smooth texture. The replacement blade has been well-tested by the manufacturer.
- 【COMPATIBLE WITH】: The blade replacement parts Fits For Ninja BL660 BL740 Ninja Mega Kitchen System (BL770) Blender/Food Processor with 1500W BL770A 30/ BL770 30/BL773CO 30/BL771 30/BL772 30/ 1200W NINJA BLENDER BL780 30/BL780C0 30. The blade is not created or sold by Nutri Ninja.
- 【EASY TO USE】: Simply attaches to Pro Extractor Blades included with your blender. And dishwasher safe, easy to clean.
- 【ATTENTION】: The nubs on the bottom that engage with the motor is “6 fins”. DO NOT BUY this if your blade has 7 fins.
- 【PACKAGE INCLUDE】: 1x 1* Single Serve Blade, 2 * 16-Oz Single Serve Cups with Lid.
Description
Replacement Parts for Nutri Ninja, Blender 6 FIN Blade Assembly and 2 Pack 16 oz Cup Set for BL770 BL780 BL660 Professional Blender
9. 7 Fins Replacement Blade Parts for Nutri Ninja Blender, Extractor Bottom Blade for Auto iQ BL682 BL2013 BL480D BL642 NN102 and More (1PCS)
Feature
- Compatible models: 7-fin blender parts replacement is suitable for Nutri Ninja Blender, only for the following models- ,BL482-30, BL486, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL494, BL640, BL641, BL642, BL642W, BL680A, BL682,BL2012, BL2013, BL450, BL451, BL454, BL456, BL480, BL480D, BL481,NN100, NN100A, NN101, NN102
- Note:The blender blade replacement has two models-6fins and 7 fins. The replacement model of our blade is 7fins.Please note that your machine base is 7fins before purchasing
- High-quality materials: The blade replacement of the ninja blender is made of food-grade BPA plastic and high-strength stainless steel blades. Odorless, non-oxidizing, reusable mixer blade, built-in rubber gasket, will not leak.
- Reminder: Note 1: Be careful of the blade when opening the package. Note 2: If you want to use this replacement gasket, please remove the pre-installed gasket in the bottom blade! Note 3: Pay attention to compatible models before purchasing
- After-sales service: We provide 100% satisfactory service to all customers. If you encounter any problems in use, please contact us to help you solve them.
Description
Compatible Models:
7Fins
CT640,CT641,CT680,CT680A,CT680W,CT680SS
NN100,NN100A,NN101,NN101-30,NN102,NN210
BL480-30,BL481-30,BL482-30,BL483-30
BL485,BL486CO,BL487,BL487A,BL487T,BL487CO,BL488W
BL490,BL491,BL492,BL492W,BL493,BL494,BL494C
BL641,BL680A,BL680A-30,BL682,BL682-30,BL682W
BL2012,BL2013
BL450-30,BL454Q
Not Fit ：
6Fins
BL480, BL480-70,BL480D 30,BL480w-70
BL450, ,BL450-70, BL451-70, BL454-70,BL455-70
BL481-70,BL482-70,BL483-70,BL484-70
BL740, BL770. BL771, BL772, BL773CO, BL780
BL810, BL820, BL830
BL660, BL663, BL685-30
Package Include:
1x Gasket Rubber
1 x 7 Fins Ninja Blender Blade replacement
10. Blender Blade Replacement Parts for Ninja 16 oz Blender Cup, 6 Fins Blender Extractor Blade Replacement,4 Blade Assembly For Nutri Ninja Bl770, Bl771, Bl773co,Bl780, Bl660, Bl740
Feature
- 【PREFECT FIT】: Blender Blade Assembly for Nutri Ninja BL770, BL771, BL773CO, BL780, BL660, BL740, only fits for 16 oz Cup, 6 Fins, 3.35 inches / 8.5 cm
- 【GOOD REPLACEMENT】: Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe.
- 【PREMINUM QUALITY】: Made of food grade PP and stainless steel
- The replacement blade has been well-tested by the manufacturer.
- 【PAY ATTENTION】: This blade is Only fit for Ninja 16oz Cup. (Not fit 18oz, 24oz, 32oz)
- 【100% SATISFACTION GUARANTEE】 Please kindly check your Ninja blender is 6 fins blender before purchase. With 3 months warranty: for any reason you’re not completely satisfied,can ask for a replacement or full refund.
Conclusion
By our suggestions above, we hope that you can found Replacement Blades For Ninja Blender for you.Please don’t forget to share your experience by comment in this post. Thank you!
