662 reviews analysed
1. Dashboard Pad Mounting Disk for Suction Cup Phone Mount & for Tom Tom Garmin GPS Suction Mount Sat Nav Dash Cam Holder Stick On Universal Dash Mount Pad w/3M Adhesive 70mm Diameter 3 Pcs
Feature
- To provide smooth, glass-like surfaces for pedestals of suction cup car mounts to work more effectively.
- 3M PE foam adhesive at the bottom can be fixed on textured surfaces.
- Has a diameter of around 2.76 inches, applicable to most suction cup GPS/mobile holders on the market.
- No tools required for installation.
- Buy with confidence as every APPS2Car product comes with one-year warranty.
2. Dashboard Mount Disc 70mm Diameter 3M Adhseive Dash Mounting Pad for Tom Tom Garmin Magellan GPS Suction Cup Mount Also for Dash Phone Holder – 2 Pack
Feature
- Smooth Surface Mount Disc – To provide smooth, glass-like surface for pedestals of suction cup car mounts to work more effectively. Suitable for Every Suction Mount
- Strong Sticky 3M PE Foam Pad – 3M Adhesive Tape sticks to almost all textured surfaces. *Make sure the surface is cleaned throughly and free of any dashboard conditioners or other treatments.
- Universal Compatibility – Semi-permanent Adhesive Mounting Disc works with all Garmin TomTom Magellean GPS suction mounting pedestals, and dashboard suciton phone mount.
- Size: about 70 mm in diameter
- Note: Each pad is one-time use only. Once removed, it may not be reusable.
Description
Universal Compatibility
About 70mm diameter fits for almost all Garmin TomTom Magellean GPS mounting pedestals and dashboard suction phone mount.
Dashboard Mounting Instructions
1. Choose a suitable location for disk (and pedestal) installation.
Do not place mount in or near an air bag deployment zone or where it will obstruct view of the road or hinder vehicle operation.
2. Clean the dashboard surface area thoroughly with alcohol pad to ensure dashboard is clean and free of any dashboard conditioners or other treatments.
3. Remove the paper backing of the disk and place on the cleaned surface. Press the top of the disk down firmly to allow the adhesive to stick to the surface. Allow 24 hours for the adhesive to cure to the surface before applying any pressure.
4. Place the suction cup of the pedestal (sold separately) firmly down on the center of the mounting disk and lower the securing lever.
Removal Instructions
1. Prepare the surface around the disk by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the adhesive area for about a minute.
2. Take a long piece of dental floss in each hand and slowly work back and forth at the base of the adhesive disk. Gently use the dental floss to cut the adhesive from the dashboard until the black plastic disk is removed.
3. If the sticky adhesive area breaks apart or does not come off completely, re-apply a small amount of alcohol (or adhesive removal liquid) and carefully lift off the remaining area by hand.
Note: Adhesive disk is intended for semi-permanent installation and one-time application. Once removed, it can’t be reapplied.
Package
2 * 70mm Adhesive Mounting Disk
3. iSaddle Adapter Plate Circular Adhesive Dash/Console Disc with 3M Adhesive Suction Cup Base For Car Dashboards Garmin TomTom GPS Smartphone Dashboard Disc(2Pcs,Diameter About 71mm)
Description
The iSaddle Rotating Car Mount Dashboard Disk has a simple, sleek and discrete design to compliment the interior of any vehicle. Effortlessly transform your dashboard into a “glass-like” surface to make it compatible with most windshield-style car mounts, GPS device mounts and any other similar device mounting systems. No tools are required to install – simply adhere to the dashboard using the strong adhesive base and your Dashboard Disk is ready to go. Equipped with a full 360 degrees of rotation, allows for optimal viewing adjustments for all drivers. Once you find that perfect viewing angle, one simple press of a button will lock the Dashboard Disk into place to keep it from moving while you’re on-the-go. With a strong-hold, adhesive base and a durable design the iSaddle 360-Degree Rotating Car Mount Dashboard Disk is the perfect addition to your vehicle.
4. Crossery Adhesive Mounting Disk for Car Dash Board | Phone Mount, Dashboard Cam & Smartphone Holder Suction Disc | Compatible with Garmin & Tom Tom GPS | Cell Phone & Car Accessories | 70mm 2-Pack
Feature
- ? UNIVERSAL – This semi-permanent adhesive mounting disk works with any 60mm suction mounting pedestal, including Garmin and TomTom GPS, for adhering to any vehicle dashboard.
- ? PEEL & STICK – Installation on your dashboard can be done in 3 steps: Clean the surface of your selected area, remove the paper backing from the mount disk, then position the disk and press it down.
- ? EASY REMOVAL – Apply a generous amount of rubbing alcohol or a similar adhesive removal product to the area with a cotton swab. Cut through with a long piece of dental floss until the disk is removed.
- ? LEAVES NO DAMAGE – This mounting disk won’t leave a trace when you decide to remove it. While the adhesive is strong, the disk can be lifted effortlessly without leaving any residue.
- ? DURABLE & VERSATILE – Our disk is made of high quality heat-resistant material that is sure to last a long time. The adhesive can also stick to vertical surfaces, soft touch dashboards and windshields.
Description
Worried that your suction cup mount will damage your dashboard?
Mounting your GPS, cell phones and other devices on the car dashboard or windshield is essential while driving. It allows you to conveniently view your messages without taking your eyes off the road.
However, the mounting pedestals and suction holders of these electronics can be sticky. When placed on textured or soft dashboards, they can damage the surface. Plus, they leave a residue once you decide to remove them.
Protect your dash from adhesive remnants with Crossery Adhesive Mounting Disk!
This car accessory fits any 60mm suction mount for smartphones, car cameras and GPS. The disk adheres to the dashboard, while the suction cup holds on to the disk. With a much larger size than the cup, it ensures a secure attachment so that the pedestal won’t fall off.
The strong adhesive ensures that your device won’t drop even if it is placed on your windshield. It will not melt or lose its strength under the heat of the sun.
Don’t worry about upgrading your devices in the future, when you would need a larger disk. We used a semi-permanent adhesive that can be detached as easily as it is set up.
Here are more benefits of using our mounting disk:
? Also comes in larger sizes of 80mm and 90mm to suit your needs ? The disk is compact and won’t take up too much space on your dashboard
? A practical gift for friends and family on any occasion ? Backed with a 2-year warranty
Mount your devices on the dashboard safe and secure. Add Crossery Adhesive Mounting Disk to your cart TODAY!
5. ARKON APVHB20 90mm Extra Strength Adhesive Mounting Disk for Car Dashboards
Description
The APVHB20 90mm adhesive mounting disk features an extra-strength 3M VHB adhesive and allows you to securely mount an Arkon or third-party 80mm windshield suction mounting pedestal to your car’s dashboard. Applicable Arkon mounting pedestal models include CM017-KST-2SH, CM078WD-SBH, RM080AMPS, RM0792TWD, and RM0802T. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the extra-strength adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M VHB dash mount disc, then place and press down on a previously cleaned surface. (Allow 24 hours for the adhesive to cure before securing the base of the mounting pedestal to the center of the disk for best results.) WARNING: Use caution and discretion when adhering APVHB20 to your car dashboard or other flat surface. This disk uses 3M VHB adhesive, which is designed to be a PERMANENT solution. Use of this disk may result in permanent adherence to the selected surface. Professional strength solvents or tools may be helpful in removing the adhesive. Arkon is not responsible for any damage caused to your vehicle or other surface due to the installation of this mounting disk. Adhesive disks with a semi-permanent bonding strength (Model AP036 -70mm, Model AP013 -80mm, Model AP020 -90mm) are available from Arkon. For an extra-strength 80mm disk to use with 70mm suction mounts, see Arkon Model APVHB13.
6. Dual Dash cam | VAVA Dual 1920x1080P FHD | Front and Rear Dash Camera | 2560x1440P Single Front| for Cars with Wi-Fi | Night Vision | Parking Mode | G-Sensor | WDR | Loop Recording| Support 128GB Max
Feature
- Dual 1080P Dash Cam: The front and rear camera simultaneously capture the road front (155°) and rear (126°) in crystal details at dual 1920x1080P 30fps. Or Single front camera provides you with a crystal clear QHD 2560x1440P@30fps video resolution.
- Dash cam with night vision: Utilize Sony sensor improves Exmor R’s low light sensitivity allowing clear imaging in low light environments and Image Signal Processing (ISP) technology to record a clear, visible video in any situation- day or night.
- Wi-Fi dash cam & VAVA Dash APP: With built-in Wi-Fi and VAVA Dash App (on Google or APP store), easily access to the configure, live stream, playback, download and share incredible HD video to the social media, such as Facebook, Instagram etc.
- Loop recording: Seamless Loop recording will be automatically activated when start the engine. Recorded videos are saved in 1 , 2 or 3-minute segments with an auto-looping mechanism. Support up to 128GB card( Class 10). Note: The 128GB Card not Included.
- Compact Design & Super Easy Installation: Low-profile design allows the VAVA Dash cam to be a well-hidden witness to the road ahead
- When plugged in, operates at 14°F-122°F. Using battery power (for the parking monitor), operates at 32°F-158°F.
Description
VAVA Dash cam features NT96663 CPU that records at 60 frames per second in 1080p resolution. And built-in Sony IMX323 CMOS image sensor provides crisp, smooth and wide footage, even in night.
7. VIOFO A119 V3 2560 x 1600P Quad HD+ Dash Camera with GPS Logger 2020 Edition
Feature
- QUAD HD+ RECORDING: Featuring an entirely new chipset design & Sony sensor to support Quad HD+ recording in 2560 x 1600P / 2560 x 1440P at 30fps to create high quality, vivid and detailed images in various lighting environments.
- SONY 5MP STARVIS SENSOR: Experience the new Sony Starvis 5MP technology with detailed, brighter and crystal-clear images captured in day-or-night time lighting for super clear and consistent night vision.
- MOTION & COLLISION DETECTION: Using the camera’s G-Sensor and State-of-the-Art motion detection technology, video footage is now intelligently captured in parking mode when moving objects and/or impacts are detected while the vehicle is parked. Files are flagged as important and protected onto the SD card for review.
- PRE & POST BUFFERED RECORDING: Capture the whole story of the events leading up to and after events or collisions with intelligent recording technology that automatically saves footage both 15-seconds before and 30-seconds after a detected collision and/or event.
- TRUE PARKING MODE: Forget the old and conventional style of parking mode ‘frame-by-frame’ recording. This camera’s video segments are captured in full-continuous clips while the vehicle is parked, rather than strung together ‘frame-by-frame’.
8. Magnetic Phone Car Mount,APPS2Car Universal Dashboard Windshield Industrial-Strength Suction Cup Car Phone Mount Holder with Adjustable Telescopic Arm,6 Strong Magnets,for All Cell Phones
Feature
- VERSATILE:Safely and quickly secure a mobile device to most flat surface except leather, vinyl and soft surface with the sticky gel on the base of the suction cup .（please use the included 3M dashboard pad if the surface you want to mount is not smooth but textured.).Compatible with all Smartphones for car,home or office.
- SUPER SUCTION CUP: Our industrial-strength suction cup base provides a strong, secure hold on the dashboards, windshields, countertops, desks, tables and other surfaces.(Please avoid to expose it to the sun in high temperature for a long time）
- STRONG MAGNETIC FORCE :6 powerful magnets hold your devices much more tightly than common magnets. securely holds your cell phone in place on the dash or windshield even with your car on the bumpy of roads and with the heaviest of smartphones.
- OPTIMAL VIEWING ANGLE: 360 degree rotatable and adjustable & extendable telescopic arm to provide you infinite viewing angle. Innovative ball joint construction allows you to adjust 360 degrees. Telescopic arm can be extended from 4.6”/11.7cm-6.29”/16cm(include magnet head)and can up or down for optimal viewing angle. No blind sides. Optimal viewing from almost any angle. No more screw to adjusting,just pull and push to adjust the length.Easy one hand operation!
- WORRY-FREE WARRANTY:Buy with confidence as every product we offer comes with a 30 days money back return policy backed by Amazon and a 12 months item warranty from APPS2Car.
Description
Strong Magnetic force
6 pieces of N45 magnets form a strong magnetic field, much stronger than normal magnets, ensuring your device stays more secure while driving.
360 Degree Rotation
The innovative ball joint allows for full rotation to assure optimal viewing angle including vertically or horizontally.
Adjustable and Extendable Telescopic Arm
The telescopic arm is extendable,the length of telescopic arm is between 4.6”/11.7cm-6.29”/16cm(include magnet head)and the tilt angle could be adjusted for 240 degree for optimal viewing angle.
No more screw to adjusting,just pull and push to adjust the length.Easy one hand operated!
Super Sticky Suction Cup
Industrial-strength suction cup along with sticky gel pad layer make sure the mount attaches well to the dashboard or windshield and stays put even on the bumpiest roads!
*The suction cup can be restored in good condition by simply rinsing under running water and air dry.
Wireless Compatible
With the proper plate placement magnets will not interfere with Qi Wireless Charging Phones.
Easy to Installation:
Place the car mount on the optimum position and then press down the “LOCK” lever.
*Note:
– Clean the dashboard or windshield surface thoroughly to remove any dust or debris before installing the car mount.
– If the surface of your car’s dashboard is not smooth, but textured ,please use the 3M dashboard pad (Please note the 3M dashboard pad is one-time use) .
-The suction cup may not compatible with the leather, vinyl and soft style dashboard.Recommend that to mount it on the windshield for stronger hold if your car’s dashboard surface is leather or vinyl or soft.
-Magnetic mount Caution: This magnetic mount is not a toy. The small magnets are harmful if swallowed. Keep away from children.
Package includes:
1 x Suction cup magnetic car phone mount
2 x Metal plate (1 Rectangle,1 Rounded)
1 x Cat Shape Metal Plate
1 x Dashboard Pad
1 x Manual
9. VANMASS Car Phone Mount, Dashboard Windshield Air Vent Cell Phone Holder for Car with Vent Clip & Dashboard Pad, Strong Sticky Suction, One Button Release Car Cradle, Compatible 3.5"-6.5" Phone & Case
Feature
- Huge Suction Power/Firmly Air Vent Clip: As Dashboard Mount: The nano-silica gel pad with ultra sticky adhesive make it mounting firmly on Dashboard or Windshield. The 2-steps security lock on the base enhances the power of the suction cup. As Air Vent Mount, 2 level clip lock makes it mounting firmly. This car phone holder is perfect for anyone who needs a sturdy mount that won’t get its jimmies rustled when you hit a bump.
- One-hand Operation: Press button on the right side of the car dashboard phone holder to open the clamps, place your phone in it with the arms open and manually squeeze the arms closed tightly to hold the phone. You can take advantage of all your phone’ s handy features – like GPS navigation, weather monitoring, music, and traffic alerts – without taking your hands off the wheel.
- All-Around Protection: The textured backrest of the cradle, the sponge cushion on the 2-side clamps, and the rubber pad on the bottom legs make this phone car mount anti-slide and wobble-free. Holding legs allow hassle-free charging for your cell phone.
- Infinite Viewing Angle: Phone can be rotated through swivel ball head, giving adjustable viewing angles. Telescopic arm adds 2 inches to allow closer device viewing, and it also can be pivoted up and down 270 degrees to fully adjust the position of your phone.
- Excellent After-sales Service: All of VANMASS products are back by 12-month replacement warranty and lifetime friendly customer service. Welcome to contact us if you have any question about our item.
10. Nite Ize Steelie Dash Mount Kit Plus – Magnetic Car Dash Mount for Smartphones with 2X Holding Power and Restickable Magnet Adapter
Feature
- MAGNETIC CAR PHONE HOLDER FOR YOUR DASH, HANDS-FREE VIEWING – Dock your phone to your dashboard in a snap, with a sleek and compact design using Steelie magnetic mounting technology. Secure just about any phone to most any car dash
- RESTICK YOUR MAGNET MULTIPLE TIMES – The included MultiStick Adapter allows you to easily reposition your magnet or move it between cases – hardshell case required for glass-backed phones. Or attach the magnet using the included 3M VHB adhesive
- ADJUSTABLE VIEWING ANGLES – The Dash Mount features a steel ball that articulates with the Steelie Magnetic Phone Socket Plus on your device allowing you to tilt your phone smoothly from landscape to portrait and everywhere in between
- POWERFUL, HIGH-STRENGTH MAGNET – The Magnetic Phone Socket Plus offers twice the holding power of our standard-sized magnetic socket making it perfect for both standard and plus-sized phones. Uses powerful neodymium magnet
- SAFE FOR USE WITH PHONES – The powerful magnet will NOT damage your mobile device and can also be paired with GPS units and MP3 players. However, do not place it near magnetically sensitive objects such as credit cards, computer hard drives, or pacemakers
- WORRY-FREE GUARANTEE – all Nite Ize products are backed by our Worry-Free Guarantee
Description
The beauty of the Steelie Dash Mount Kit Plus is in its simplicity. This magnetic two piece ball-and-socket mounting system attaches to your dashboard using a strong, removable 3M VHB adhesive. The Magnetic Phone Socket Plus features a powerful neodymium magnet and offers twice the holding power as our standard-sized magnetic socket making it perfect for both standard and plus-sized devices with or without a case. With two convenient ways to attach your magnet to your device, you can decide whether to keep the phone-safe magnet on your phone all the time or use the MultiStick Adapter which allows you to remove and restick the Magnetic Phone Socket Plus multiple times. The Steelie Magnetic Phone Socket Plus contains a silicone center, creating a smooth glide and firm grip that allows you to easily adjust the phone for the perfect viewing angle.
A great bonus feature to this product is its versatility. With the Steelie Magnetic Phone Socket Plus you can easily attach your phone to other magnetic surfaces like refrigerator doors, toolboxes and our entire ecosystem of Steelie Magnetic Mounts.
WHY USE THE MULTISTICK ADAPTER? For the times when you want to be magnet-free.
Easily move your magnetic socket between devices + cases.
MultiStick adhesive holds strong, removes quickly and resticks multiple times
Hardshell case required for glass-backed phones
The Steelie Magnetic Phone Socket Plus contains a strong magnet. This magnet will NOT damage your mobile device; however, do not place it near magnetically sensitive objects such as credit cards, pacemakers, or computer hard drives. Nite Ize assumes no liability for damage to such products. Nite Ize has been creating innovative, solution-based products with quality, performance and value at the core for over 25 years. Based in Boulder, Colorado, we aim to continue offering imaginative and innovative products that make our customers’ lives easier, safer and more fun.
Conclusion
By our suggestions above, we hope that you can found Car Dash Mount Plate for you.Please don’t forget to share your experience by comment in this post. Thank you!
