786 reviews analysed
1. 15ft MicroUSB & MiniUSB Dash Cam Hardwire Kit with Mini/LP Mini/ATO/Micro2 Fuse, Micro to Mini (and Type-C) Port Adapters and Battery Drain Protection System
Feature
- ONE FITS FOR ALL: With Micro to Mini (left angled) and Micro to Type C port converters, the kit is basically fit for ALL Dash Cams or Car Charger like NuCam DL, Wireless Charger Phone Holder Nucharger Auto, Rexing, ROAV, Anker, DDPai, Papago etc. Also, it comes with most popular fuse types including Low-Profile Mini, Mini, ATO(Regular), and Micro2. It has left angled mini USB head. For right angled mini USB head, please search B0787LD92N.
- ENOUGH LENGTH: Overall 15ft hardwire kit can be installed basically on All vehicles. Input length: 3ft, Output length: 12ft.
- BATTERY DRAIN PROTECTION SYSTEM: Device powers off when vehicle battery voltage drops below 11.6V for protection purpose to save battery to start your engine. When car batteries are new, they’re around 12.5 Volts or more. It’s also suitable for 24V systems.It is recommended to turn on parking mode for your dash cam to save your battery power. Contact us for higher cutoff voltage model if your battery is drained too low to start your engine.
- EASY INSTALLATION: Installation is easy and clean without any help from professionals! However, our customer service is also immediately responsive if you do have questions.
- WARRANTY: One year free service for any question you are facing with this dash cam hardwire kit.
2. ASC Car Stereo Install Dash Kit, Wire Harness, and Antenna Adapter for installing a Single Din Aftermarket Radio for 1999 2000 2001 2002 2003 2004 2005 BMW E46 318 323 325 328 330
Feature
- Radio Dash kit, wire harness and antenna adapter for installing an aftermarket radio
- Compatible with: 1999-2005 BMW 3 Series E46 318 323 325 328 330
- Dash kit works with a Single din Radio- Dash kit has a black finish- Wire harness and antenna adapter plugs directly into the car
- Installation note- Radio metal cage and radio goes in the vehicle opening first then the radio kit then goes in front of it and is screwed in by two factory screws. Don’t forget to connect the amp turn on wire as needed.
- Won’t retain some features like steering audio controls- extra adapter required
Description
Single Din Radio Dash kit, wire harness and antenna adapter for installing an aftermarket radio. Compatible with: 1999 2000 2001 2002 2003 2004 2005 BMW 3 Series E46 318 323 325 328 330
3. Premium Car Stereo Install Dash Kit, Wire Harness, and Antenna Adapter for Installing an Aftermarket Radio for 07-12 Nissan Altima w/Digital AC Climate Control – Not Compatible w/Manual Climate Knobs
Feature
- Radio kit, wire harness and antenna adapter for installing an aftermarket radio.
- Dash kit works with a Single or Double din radio. Dash kit has a black finish.
- PLEASE READ-VERY IMPORTANT— Only works with vehicles with Digital climate A/C controls- won’t work with the Manual climate controls.- manual climate has the round style bezel around knobs.
- Compatible with: 2007 2008 2009 2010 2011 2012 Nissan Altima w/Digital Climate Control Knobs
- Wire harness and antenna adapter plugs directly into the car. Includes wire crimp caps to connect wires.
Description
Radio kit, wire harness and antenna adapter for installing an aftermarket radio. Dash kit works with a Single and Double din radio. Dash kit has a black finish. Wire harness and antenna adapter plugs directly into the car. Includes wire crimp caps to connect wires. Very Important: Only works with vehicles with Digital climate A/C controls- won’t work with the Manual climate controls- Manual climate has the round style bezel around knobs. Compatible with: 2007 2008 2009 2010 2011 2012 Nissan Altima w/Digital Climate Control Knobs
4. MultiPurpose Car Wiring Harness Tape, Keenso Self Adhesive Anti Squeak Rattle Felt Automotive Wiring Harness Tape, Black (9mm × 25m)
Feature
- ◇ 【PREMIUM QUALITY】 — High-quality polyester cloth with high oil resistance and strong acrylic pressure-sensitive adhesive.High viscosity, no hazardous substances, good flexibility, anti-tear
- ◇ 【SUPER FUNCTION】 — Low temperature is not hard, easy to operate, has excellent stain resistance,aging resistance, also has a certain isolation minus sound effects
- ◇ 【GOOD PROTECTION】 — Can be used in the engine compartment and the passenger compartment harness machine after conversion winding insulation and protection
- ◇ 【EASY TO USE】 — Hand tear, easy to operate, winding harness, specifically for the automotive industry
- ◇ 【IDEAL CAR KIT】 — Ideal for automotive interior parts of the harness use noise reduction, such as the dashboard wire harness and main harness wound
Description
Keenso — MultiPurpose Car Self Adhesive Anti Squeak Rattle Felt Automotive Wiring Harness Tape
Specifications:
Colour: Black
Structure: High-quality polyester cloth with high oil resistance and strong acrylic pressure-sensitive adhesive.
Storage period: 23 ℃ x 65% RH, in the original box can be stored for 12 months.
Size: (L) x (W) 9mm x 25m, 19mm x 15m, 32mm x 15m (Optional)
Package Included:
1 x Automotive Wiring Harness Tape
Note:
1. Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.
2. Please understand that colors may exist chromatic aberration as the different placement of pictures.
5. Nilight LED Light Bar Wiring Harness Kit 12V On Off Switch Power Relay Blade Fuse for Off Road Lights LED Work Light,2 years Warranty
Feature
- Universal fit: compatible with all automobiles, boats and devices equipped with a 12V power source
- CIRCUIT PROTECTION: Power relay-safety protection and conversion circuit. Blade fuse protects the circuit when overcurrent or short circuit occurs.
- ILLUMINATED SWITCH: 3 pin on/off rocker switch with red indicator light when truing on, easy to turn on or off, has been passed test of 5, 000 times pressing.
- TWO AVAILABLE LEADS: With 2 sets of light output connectors for dual lighting fixtures less than 180W, the connection is more stable.
- PACKAGE INCLUDE:1 x Wiring Harness Kit ,1 x Instructions,
Description
Product Features:
10ft wiring harness, 2 sets of connectors to light fixtures
illuminated on/off toggle switch – can easily turn on/off the lights.
Inline blade fuse & relay – multiple safety protection.
Note:
Maximum Wattage: 180W; Max Ampere: 15A
Operating Voltage: 12V DC Power
Please finish the installation by professionals or install the wiring harness under the guidance of professionals.
6. Nilight NI -WA 07 LED Light Bar Wiring Harness Kit 12V On/Off 5 Pin Rocker Switch Power Relay Blade Fuse for Jeep Boat Trucks, 2 Years Warranty
Feature
- Two Available leads: 12 feet extendable wiring harness, two Sets of light output connectors for dual light fixtures less than 180W.
- Efficient protection: power relay and inline blade fuse ACT as the first Line of defense against overcurrent and short circuit.
- Shining in the dark: built-in two premium LEDs emit soft light to illuminate the patterns, easy for you to find the switch in the dark.
- Wide application: suitable for almost all 12V battery vehicles, such as jeeps, ATVs, UTVs, cars, motorcycles, ships, yachts and trailers.
- Package include: 1 x wiring harness kit, 1 x 5 pin LED rocker switch, 1 x instructions
7. Nilight 135 PCS Heat Shrink Wire Connectors – Electrical Terminals Kit – Marine Automotive Crimp Connector Assortment – Ring Fork Hook Spade Butt Splices, 2 Years Warranty
Feature
- Nilight MOST VERSATILE ELECTRICAL CONNECTOR KIT – Ring, fork, hook, spade and butt splice heat shrink wire connectors are included in this multipurpose electrical connector kit
- DURABILITY AND WEATHER RESISTANCE – Thick copper barrel ensures a strong wire crimp every time. Your wire will never slip out of these connector
- EASE OF APPLICATION – Strip wire insulation, crimp terminal barrel with a wire crimper, and apply heat with a heat gun while rotating a connector
- COMPLIANT WITH ALL ELECTRICAL STANDARDS – Nilight heat shrink connectors are compliant with ROHS, ISO 9001:2008, SGS and CE standards
- Nilight QUALITY COMMITMENT – We stand behind the quality of our products
- Fit Type: Universal Fit
Description
Specification: Shrinkage ratio 3:1 Dual-walled design tubing: polyolefin tubing on the outside and hot melt adhesive inside Wire gauge imprint on connectors Extensive selection: 9 connector types (forks, rings, hooks, quick disconnects, butt connectors) in 3 sizes (red, blue, yellow) Nilight heat shrink connectors are compliant with ROHS, ISO9001:2008, SGS and CE standards. Minimum shrink temperature: 80 Degree No wire damage due to lower shrink temperature Full recovery temperature: 130 Degree Operating temperature: from -55 Degree to 125 Degree Nilight Heat Shrink Connector Kit Includes: Connector type Red 22-16 Blue 16-14 Yellow 12-10 Total QTY Butt Connectors 5 PCS 5 PCS 5 PCS 15 PCS Rings #10 5 PCS 5 PCS 5 PCS 15 PCS Rings 1/4″ 5 PCS 5 PCS 5 PCS 15 PCS Rings 5/16″ 5 PCS 5 PCS 5 PCS 15 PCS Rings 3/8″ 5 PCS 5 PCS 5 PCS 15 PCS Male Quick Disc. 5 PCS 5 PCS 5 PCS 15 PCS Female Quick Disc. 5 PCS 5 PCS 5 PCS 15 PCS Fork Terminals #10 5 PCS 5 PCS 5 PCS 15 PCS Hook Terminals #10 5 PCS 5 PCS 5 PCS 15 PCS.
8. ASC Audio Car Stereo Radio Install Dash Kit, Wire Harness, and Antenna Adapter to Add A Double Din Aftermarket Radio for 2005 2006 2007 2008 2009 Subaru Legacy + Outback with Manual Climate Control
Feature
- Radio Dash kit, wire harness, and antenna adapter for installing an aftermarket radio- Dash kit works with a Double din Radio- Dash kit has a dark silver/grey finish- Wire harness and antenna adapter plugs into vehicle’s connections
- Will not retain some features like steering audio controls, etc- extra adapters required.
- Important: Not compatible with factory amp systems like Bose, etc.- only compatible with standard systems.
- Important: Only compatible with Manual Climate Control (manual AC) vehicles only. Not compatible with Outback Sport models. Not compatible with factory amplified systems.
- Compatible with: 2005 – 2009 Subaru Legacy, 2005 – 2009 Subaru Outback
Description
Radio Dash kit, wire harness and antenna adapter for installing an aftermarket radio. Will not retain some features like steering audio controls, etc- extra adapters required. Important: Not compatible with factory amp systems like Bose, etc.- only compatible with standard systems. Only compatible with Manual Climate Control (manual AC) vehicles only. Not compatible with Outback Sport models. Not compatible with factory amplified systems. Compatible with: 2005 – 2009 Subaru Legacy, 2005 – 2009 Subaru Outback
9. Jeep Liberty 2003 2004 2005 2006 2007 Aftermarket Double Din Radio Installation Dash Kit Bezel + Standard Wire Harness & Antenna Adapter
Description
Finally a Double Din Radio installation solution is in reach without having to pay tons of money for a custom handmade kit (these cost upwards of $349)!!! Installation Directions: 1. In the lower pocket area remove the one screw located in the center 2. Pry out on the factory bezel and separate it from the dash 3. Disconnect AC harness and the cigarette lighter 4. Remove the 4 Philip screws that hold the radio in place 5. Pull radio forward and disconnect the wire harness and antenna 6. Unmount the AC system from the factory bezel by removing the 4 Philip screws 7. Reattach that to the new double din bezel 8. Remove the old factory cigarette lighter and install on new double din bezel 9. Slide out the pocket liner and install on the new double din bezel 10. Remove radio supports by removing the 4 Philips (see picture gallery) 11. Use a drimmel or other plastic cutting device to remove the necessary plastic from the inside of the dash (see picture gallery) 12. Take the new bezel brackets and loosely attach to the new double din bezel 13. Dry fit your aftermarket double din radio into the bezel and remove/add any necessary trim rings/cages 14. Then line up aftermarket radio with the brackets and loosely screw through the brackets into the radio 15. Slide the aftermarket radio forward and back until you achieve a clean finish 16. Making sure the aftermarket radio is its square tighten all screws 17. Wire in the aftermarket radio to the aftermarket harness 18. Install antenna adapter 19. Reconnect the AC controls and lighter button with harnesses in the dash 20. Plug aftermarket wire harness into the factory radio harness. 21. Snap bezel into place and secure final screw in lower pocket area.
10. 14 Gauge Copper Clad Aluminum CCA Flexible Low Voltage Primary Wire in 100 ft Roll Red Black Combo (200 Feet Total) for Car Audio Video 12 Volt Trailer Harness Wiring (Also Available in 16 Guage)
Feature
- 14 Ga | 100ft/Color | Color: Red & Black
- Stranded Copper Clad Aluminum | Insulated in PVC | Rated to 105C, 6 to 80 V
- For 12-V Automotive, Car Stereo Audio Speaker, Trailer hook up, low voltage LED light Wiring
- IMPORTANT: DO NOT use for building / household 110 / 220 V ac wiring
- For more wiring selections, visit WWW.AMAZON.COM/GSPOWER
Conclusion
By our suggestions above, we hope that you can found Ac Dash Wire Harness for you.Please don’t forget to share your experience by comment in this post. Thank you!
