909 reviews analysed
1. Honeywell WAVE-2 Two Tone Siren
2. Honeywell 747 Self Contained Indoor Siren
3. Honeywell Ademco 5800WAVE Wireless Siren
Feature
- Siren output level is 95 db at three feet LED system status
- Transmits module status including mounting tamper low battery and AC loss to the control panel
- AC powered with a rechargeable 12 hour battery backup Provides temporal pulse sounding for fire alarms
- Compatible with Lynx R Rev 10 or higher and Vista controls that support the 5883 transceiver
- Plugs in to any standard duplex receptacle and installs in seconds
4. Honeywell Ademco 702, Self-Contained Electric Security Siren, 6-12VDC
Description
Self Contained Siren 6 to 12 volt DC combination speaker and siren driver Dual channel (warble or steady) Enclosed wires, easily tampered 30 watt power rating.
5. Honeywell RWD21 Water Leak Alarm
Description
Product Description
Easy to use – set in lowest spot where water leak may occur. Detects water 1/16″ deep. Ideal for use in areas not usually observed: Water Heaters – Behind Washing Machines or Dishwashers – Under Refrigerator for Ice Makers – Under Sinks – Sump Pumps of inside pits – Toilets – Behind or near media systems. Provides early warning of potentially costly water damage.
Amazon.com
Re-Useable Water Leak Alarm — RWD21
• Sensor and alarm all-in-one
• Loud audible alarm
• Economical way to defend against water leaks
Never be surprised by a leak or flood again! The Honeywell RWD21 Single Use Water Leak Alarm automatically goes off when water comes into contact with it allowing you to respond to leaks and floods quickly and prevent disastrous damage caused by unknown water exposure. Great for placing around water prone areas such as sump pumps, water tanks, burst prone pipes, or even under the sink. Honeywell’s water defense system and water-sensing alarm offers superior protection against leaks and water damage in your home and office. Add peace of mind with a water leak alarm.
Features:
- Unlimited use spot detector; easily re-sets for re-use
- Easy to use near water heaters, sump pumps, under sinks, dishwashwers
- Water sensor and alarm all in one
- Economical way to defend against water leaks in multiple locations throughout the home
- Loud audible alarm
- Alarm sounds for up to 24 hours (dependent upon battery life)
- Low battery chirp
- Requires 9V battery (sold separately)
6. Honeywell 6290W Touch Center 7" Color Wireless Touchscreen Keypad Alarm Control Panel
Feature
- Easy to Use: Clean touchscreen display with easily identifiable icons and prompts. Critical software updates as a result of the push from Resideo or local onsite updates as a result of the 6290W SD card slot
- Authorized users can simply add and delete user codes. Backplate designed to easily update or retrofit current 6160 and 6280W installs.
- Features Your Customers Want: High resolution 7″ touchscreen with a resolution of 1024 x 600. Stylish, tablet-like design only 1″ off the wall.
- Clear voice annunciation of system status, type of alarm and affected zone. Event log tracks when system is disarmed by employees, temporary guests or family members.
- Streamlined arming/disarming and zone-bypassing
Description
The Honeywell 7″ Color Touchscreen Keypad works as a high-graphic resolution touchscreen with voice annunciation which is the ideal choice to increase keypad revenue on new installations. While being an easy upgrade opportunity for existing VISTA residential and commercial installations. Furthermore, the thin/sleek design will look appealing in any residence or business. The ability to add pictures and videos to the home screen lets users customize it to their own preferences, or dealers can also add their company logo or message for increased awareness and referrals.
7. HONEYWELL SENSORS WAVE2PD SIREN,INDOOR,2 TONE,PIEZO DYNA
8. Honeywell RWD14 Water Alarm
Feature
- Four (4) one-time use spot detectors; built-in non-replaceable batteried included
- Economical way to defend against water leaks in multiple locations throughout the home
- Ideal for use in areas not usually observed: water heaters behind washing machines or dishwashers, under sinks, etc.
- Water sensor and alarm in one
Description
Product Description
Honeywell Water Leak Alarm. Easy to use – set in lowest spot where water leak may occur. Detects water 1/16" deep. Ideal for use in areas not usually observed: Water Heaters – Behind Washing Machines or Dishwashers – Under Refrigerator for Ice Makers – Under Sinks – Sump Pumps of inside pits – Toilets – Behind or near media systems. Provides early warning of potentially costly water damage. One time use spot detector. Alarm sounds for up to 24 hours. Easy To use – set in the lowest spot where water leak may occur. Built in non replaceable battery included. Lasts up to 2 years. Unit must be replaced once alarm sounds.
Amazon.com
Honeywell RWD14 Single Use Water Leak Alarm Multi-Pack
• Sensor and alarm all-in-one
• Convenient multi-pack of four
• Economical way to defend against water leaks
Never be surprised by a leak or flood again! The Honeywell RWD14 Single Use Water Leak Alarm automatically goes off when water comes into contact with it allowing you to respond to leaks and floods quickly and prevent disastrous damage caused by unknown water exposure. Great for placing around water prone areas such as sump pumps, water tanks, burst prone pipes, or even under the sink. Honeywell’s water defense system and water-sensing alarm offers superior protection against leaks and water damage in your home and office.
Features:
- One-time use spot detector
- Easy to use — set in lowest spot where a water leak may occur
- Convenience pack includes four leak alarms to economically defect against water leaks in multiple locations throughout the home
- Ideal for use near water heaters, sump pumps, under sinks, dishwashers
- Water sensor and alarm all-in-one
- Alarm sounds for up to 24 hours (dependent upon battery life)
- Includes built-in battery (lasts up to 2 years)
9. LYNX Touch 7000 Control System by Honeywell 7″ full-color touchscreen WiFi ZWave compatible
Feature
- 7″ color graphic touchscreen – Resolution 800 x 480 pixels – 16.7 million colors – Intuitive easy-to-use touchscreen interface – Easy to understand icons – Menu driven navigation – Quick, accurate programming – Two dedicated keys for easy access to the home screen and emergency functions
- On-premises video viewing – Integrated video: System supports up to four cameras, which can be displayed individually or in a quad configuration on the touchscreen. Works with compatible Honeywell Total Connect Video products only (iPCAM-PT, iPCAM-WO, iPCAM-WI2/B, ACU).
- Wi-Fi support – Alarm communication to AlarmNet and lifestyle messaging via the users Internet connection – Two-way voice over Wi-Fi – Enables the LYNX Connect iOS app (available on iTunes) and the app for Android (available on Google Play) Integrated Z-Wave provides control and integration of: – Thermostats – Water valves – Door locks – Sirens – Lighting – Scenes, schedules and rules – Local, automatic and remote control via Honeywell Total Connect
- Push/Pull content through Honeywell Total Connect – Weather available in Fahrenheit or Celsius (one day or five day forecasts) – Emergency alerts (tornadoes) requires Honeywell Total Connect with Information Services Package – Traffic – News – Dealer/Central station messages (payments due, sales opportunities, community news) – End-user requests for sales or service Advanced Protection Logic technology With APL enabled, the alarm can be reported even if the system is tampered with during the entry and communications delay times. APL can be selected when using a Honeywell GSM or IP communicator. Voice announcement of system and zone status Family message center (for user recorded messages) Works with Honeywell Total Connect – Remote control of security, garage doors and Z-Wave devices – Selected event notifications Voice chime by zone 10 selectable chime tones Automatic stay arming 48 user codes (Installer, Master, plus 46 Secondary, including Duress and Guest) Three panic functions Wall or desk mount Viewable event log stores up to 256 events Exit error feature (detects difference between an actual alarm and exit alarm caused by leaving a door open after the exit delay expires) Case tamper RF jam detection Quick Exit feature provides users with an exit delay after arming their system Night Stay and Silent Exit modes Hinged cover for easy installation Real-time clock display Garage Door Function – Up to four garage doors per system – Unique garage door icon – View and monitor garage door status – Auto-secure feature – Remote notification via Honeywell Total Connect – Garage door control* – Automatically control door via scenes, rules and schedules – Locally open/close garage door from touchscreen or compatible mobile device – Remotely open/close garage door via Honeywell Total Connect
- Local Mobility LYNX Connect iOS app and app for Android – Same functions and GUI as the L7000 Zones and Devices One hardwired zone Wireless zones 80 programmable plus 24 dedicated to keyfobs Supports wireless bidirectional keypads Internal GSM radio option Wi-Fi module option ILP5 Internet module option Programmable trigger output *Requires 5877GDPK, consisting of the 5877 Relay Receiver and Z-Wave Strobe/Sounder. Not compatible with certain garage doors and garage door openers. Garage door control must have working entrapment protection. See installation instructions for details. LYNX Connect apps are available for a nominal fee in Apple iTunes Store or Google Play Store. All trademarks are property of their respective owners..
10. Honeywell – 747f – Product – Indoor Siren 2 Tone Flush Mnt
Conclusion
By our suggestions above, we hope that you can found Honeywell Alarm With Siren for you.Please don’t forget to share your experience by comment in this post. Thank you!
